Order no.: PCE-THB 38

The PCE-THB 38 Temperature Meter is ideal for detecting and digitally displaying humidity, temperature and barometric pressure. Temperature is measured by an RTD sensor and air humidity is measured by a highly repeatable, capacitive sensor. All products are test instruments, and the Temperature Meter is sent out manufacturer calibrated. An ISO certification is available optionally.


- Temperature: 0 ... 50°C / 32 ... 122°F
- Relative air humidity: 10 ... 95% r.h.
- Barometric pressure: 10 ... 1100 hPa (mbar) / 0.14 psi ... 16 psi.
- Dew point temperature: -25 ... 49°C / -13 ... 120°F
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SCI-U
The temperature signal converter converts an analog input signal into a corresponding analog output signal. The input and output signals from the temperature signal converter are completely galvanically isolated.

- Over 100 combinations pre-selected
- Converts analogue input range
- Completely galvanic isolation
- Power supply 18 ... 265V AC / DC
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HT 114
The refrigerator thermo-hygrometer PCE-HT 114 has a temperature and humidity sensor on 2 m / 6.6 ft cable. The PCE-HT 114 thermo-hygrometer records the temperature and humidity in the interior of the refrigerator and simultaneously displays it via the LCD display.

Measuring function
- Temperature: -40 ... 125°C / -40 ... 257°F (external)
- Humidity: 0 ... 100% rh (external)
- Memory for 25,920 readings
- Saves as PDF
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HT 114
The refrigerator thermometer PCE-HT 114 has a temperature and humidity sensor on 2 m / 6.6 ft cable. The PCE-HT 114 thermometer records the temperature and humidity in the interior of the refrigerator and simultaneously displays it via the LCD display.

Measuring function
- Temperature: -40 ... 125°C / -40 ... 257°F (external)
- Humidity: 0 ... 100% rh (external)
- Memory for 25,920 readings
- Saves as PDF
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VD 3

The PCE-VD 3 Vibration analyzer is a miniaturized universal Vibration analyzer with an included built-in three-axes acceleration sensor (X, Y, Z axis). The internal sensor of the PCE-VD 3 Vibration analyzer measures acceleration force along the X, Y, and Z axes with a measurement range of ±18 g per axis.


- 3-axis vibration data logging
- Software included -USB port
- Light weight
- Stand included
- Storage capacity: 4 Mbit (85764 records)
- Magnetic wall mount

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VD 3

PCE-VD 3 is a vibration data logger that measures 3-axis shock/vibration via a built-in accelerometer sensor. This vibration data logger records 3-axis acceleration (X, Y, Z) vibration measurement data for Fast Fourier Transform (FFT) waveform analysis. The vibration data logger connects to your PC via a USB port for configuration and for quick and easy data transfer.


- Measuring range: ±18 g per axis
- Frequency range: 0 ... 60 Hz
- Recording interval: Adjustable from 1 sec .... 24 hr
- Logs and stores up to 85,764 records
- Includes magnetic bracket with wall-mounting screws

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VD 3

The PCE-VD 3 Vibration Meter is a miniaturized universal Vibration Meter with an included built-in three-axes acceleration sensor (X, Y, Z axis). The internal sensor of the PCE-VD 3 Vibration Meter measures acceleration force along the X, Y, and Z axes with a measurement range of ±18 g per axis. This device is specially made for the use at industrial machinery.


- 3-axis vibration data logging instrument
- Software included / USB port
- Light weight
- Stand included
- Storage capacity: 4 Mbit (85764 records)
- Magnetic wall mount

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SCI-U
The voltage signal converter converts an analog input signal into a corresponding analog output signal. The input and output signals from the voltage signal converter are completely galvanically isolated.

- Over 100 combinations pre-selected
- Converts analogue input range
- Completely galvanic isolation
- Power supply 18 ... 265V AC / DC
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PMI 2

PCE-PMI 2 is a nondestructive wood moisture meter or dampness instrument that measures the moisture content of concrete and other building materials. It offers many preset characteristic curves based on alternative material densities. This digital moisture device gives quick and accurate moisture measurement without causing any damage to the test material.


- Offers high-frequency penetration up to 50 mm / 1.96 inches in depth
- Features an alarm function when exceeding threshold levels
- Includes a metallic sphere or ball sensor 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-BSK 1100
The analytical balance scale is a scale for daily laboratory use. Another function besides the normal measurement function of the analytical balance scale is the piece counting function. This function allows the analytical balance scale to determine the number of screws, for example.

- Measuring range: 0 ... 1100 g
- Resolution: 0.01 g
- Piece counting function
- RS-232 interface
- External calibration
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-BSK 1100
The benchtop scale is a scale for daily laboratory use. Another function besides the normal measurement function of the benchtop scale is the piece counting function. This function allows the benchtop scale to determine the number of screws, for example. 

- Measuring range: 0 ... 1100 g
- Resolution: 0.01 g
- Piece counting function
- RS-232 interface
- External calibration
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: CA-MN08

Clamp on Tester for multimeters, oscilloscopes and current faults, max. 200 A AC, max. Diameter 20 mm. The Clamp on Tester MN series offers 3 choices for the output. In addition to AC and AC voltage, a DC voltage output is possible from the Clamp on Tester. The test instrument is sent out manufacturer calibrated - a certification according to ISO standards is available optionally.


- Rated current: 200 A AC
- Transformation ratio: 1,000/1
- Output: isolated Ø 4 mm female sockets

 

Manufacturer: Chauvin Arnoux GmbH
Test Instruments manufacturer
Order no.: PCE-BSK 1100
The counting scale is a scale for daily laboratory use. Another function besides the normal measurement function of the counting scale is the piece counting function. This function allows the counting scale to determine the number of screws, for example. 

- Measuring range: 0 ... 1100 g
- Resolution: 0.01 g
- Piece counting function
- RS-232 interface
- External calibration
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: CA-MN08

Current Clamp for multimeters, oscilloscopes and current faults, max. 200 A AC, max. вiameter 20 mm.


- Rated current: 200 A AC
- Transformation ratio: 1,000/1
- Output: isolated Ø 4 mm female sockets 

 

Manufacturer: Chauvin Arnoux GmbH
Test Instruments manufacturer
Order no.: PCE-BSK 1100
The laboratory balance scale is a scale for daily laboratory use. Another function besides the normal measurement function of the laboratory balance scale is the piece counting function. This function allows the laboratory balance scale to determine the number of screws, for example. 

- Measuring range: 0 ... 1100 g
- Resolution: 0.01 g
- Piece counting function
- RS-232 interface
- External calibration
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-BSK 1100
The laboratory scale is a scale for daily laboratory use. Another function besides the normal measurement function of the laboratory scale is the piece counting function. This function allows the laboratory scale to determine the number of screws, for example. 

- Measuring range: 0 ... 1100 g
- Resolution: 0.01 g
- Piece counting function
- RS-232 interface
- External calibration
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-BSK 1100
The precision balance scale is a scale for daily laboratory use. Another function besides the normal measurement function of the precision balance scale is the piece counting function. This function allows the precision balance scale to determine the number of screws, for example. 

- Measuring range: 0 ... 1100 g
- Resolution: 0.01 g
- Piece counting function
- RS-232 interface
- External calibration
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-BSK 1100
The tabletop scale is a scale for daily laboratory use. Another function besides the normal measurement function of the tabletop scale is the piece counting function. This function allows the tabletop scale to determine the number of screws, for example. 

- Measuring range: 0 ... 1100 g
- Resolution: 0.01 g
- Piece counting function
- RS-232 interface
- External calibration
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PAC-EM-PB
Expansion module PAC PROFIBUS DP

- Plug-in communication module
- Module is automatically detected
- Programmable via front panel or software
- Cyclic and acyclic data transmission
- Easy integration using GSD file
- Baud rate of 9.6 kbit / s to 12 Mbit / s
- Connection via 9-pin Sub-D connector
Test Instruments manufacturer
Order no.: PCE-CM 41

With our conductivity meter PCE-CM 41 it is possible to measure conductivity value, the amount of all the solid material or dissolved salts  (TDS - Total Dissolved Solids) and the temperature. Our conductivity meter PCE-CM 41 is very easy to carry everywhere thanks to its small size. Auto ranges up to 20,000 PPM.


- EC conductivity: 0...2,000 µS/cm  /  0...20 mS/cm
- Salt content TDS: 0...2,000 mg/l (ppm)  /  20,000 mg/l (ppm)
- Temperature: 0.0...60 °C / 32 ... 140 °F
- Water resistant (IP 67)

Manufacturer: PCE Instruments
Test Instruments manufacturer