Expansion module PAC PROFIBUS DP

- Plug-in communication module
- Module is automatically detected
- Programmable via front panel or software
- Cyclic and acyclic data transmission
- Easy integration using GSD file
- Baud rate of 9.6 kbit / s to 12 Mbit / s
- Connection via 9-pin Sub-D connector

The analogue indicator PCE-PA39 is designed to monitor AC power. This analogue indicator can be installed onto switch panels. The analogue indicator PCE-PA39 is a moving-coil ammeter. Active power as well as apparent power can be measured by means of this analogue indicator PCE-PA39.

- Moving-coil meter to measure electric power
- 96 x 96 mm
- Panel installation

Measurement function:
- AC voltage
- DC voltage
- AC
- DC
- Resistance
- Diode measurement
- Continuity test

Measurement function:
- AC voltage
- DC voltage
- AC
- DC
- Resistance
- Diode measurement
- Continuity test

Measurement function:
- AC voltage
- DC voltage
- AC
- DC
- Resistance
- Diode measurement
- Continuity test

Measurement function:
- AC voltage
- DC voltage
- AC
- DC
- Resistance
- Diode measurement
- Continuity test

Measurement function:
- AC voltage
- DC voltage
- AC
- DC
- Resistance
- Diode measurement
- Continuity test

The environmental meter for soil has been developed with the purpose of finding an effective method for directly determining the pH value of soil. With the help of this environmental meter, it is possible to quickly and accurately measure the pH value of soil, including a soil sample taken from the ground.

- Measuring range: 0.00 ... 14.00 pH
- Dissolution: 0.01 pH
- Power supply: 4 x 1.5 V AAA batteries

 

**Care must be taken when inserting probe to not break it** 

The environmental tester for soil has been developed with the purpose of finding an effective method for directly determining the pH value of soil. With the help of this environmental tester, it is possible to quickly and accurately measure the pH value of soil, including a soil sample taken from the ground.

- Measuring range: 0.00 ... 14.00 pH
- Dissolution: 0.01 pH
- Power supply: 4 x 1.5 V AAA batteries

 

**Care must be taken when inserting probe to not break it** 

The pH meter for soil has been developed with the purpose of finding an effective method for directly determining the pH value of soil. With the help of this pH meter, it is possible to quickly and accurately measure the pH value of soil, including a soil sample taken from the ground.

 
- Use: Soil pH measurement
- Measuring range: 0.00 ... 14.00 pH
- Dissolution: 0.01 pH
- Power supply: 4 x 1.5 V AAA batteries

**Care must be taken when inserting probe to not break it** 

Measurement function:
- AC voltage
- DC voltage
- AC
- DC
- Resistance
- Diode measurement
- Continuity test

Measurement function:
- AC voltage
- DC voltage
- AC
- DC
- Resistance
- Diode measurement
- Continuity test

The water analysis meter has been developed with the purpose of finding an effective method for directly determining the pH value of soil. With the help of this water analysis meter, it is possible to quickly and accurately measure the pH value of soil, including a soil sample taken from the ground.

- Measuring range: 0.00 ... 14.00 pH
- Dissolution: 0.01 pH
- Power supply: 4 x 1.5 V AAA batteries

 

**Care must be taken when inserting probe to not break it** 

Measurement function:
- AC voltage
- DC voltage
- AC
- DC
- Resistance
- Diode measurement
- Continuity test

The PCE-N20I digital universal indicator is used for processing 4...20 mA and 0...20 mA signals. Many measuring transducers and sensors use this type of output, which makes the PCE-N20I suitable in a wide application area. The measurement results are shown on the large 5-digit LED-display of the PCE-N20I.

- Input (selectable): 0...20 mA, 4...20 mA, ± 20 mA
- Accuracy: ± (0.2 % FS + 1 dgt.)
- Two open collector outputs
- 24 V power supply sytem for sensors and transducers

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Accuracy: ± 0.1 pH
- Temperature compensation up to 50°C / 122°F
- Universal mounting bracket
- Incl. ISO calibration certificate

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Accuracy: ± 0.1 pH
- Temperature compensation up to 50°C / 122°F
- Universal mounting bracket
- Incl. ISO calibration certificate

The PCE-N20I frequency indicator is used for processing 4...20 mA and 0...20 mA signals. Many measuring transducers and sensors use this type of output, which makes the PCE-N20I suitable in a wide application area. The measurement results are shown on the large 5-digit LED-display of the PCE-N20I.

- Input (selectable): 0...20 mA, 4...20 mA, ± 20 mA
- Accuracy: ± (0.2 % FS + 1 dgt.)
- Two open collector outputs
- 24 V power supply sytem for sensors and transducers

PCE-N20U is a frequency indicator used for signal processing. Designed for quick and easy system integration, the digital panel meter features a large 5-digit LED display with tricolor coding dependent on the measured values. The PCE-N20U also can output signals via two open collector outputs when a threshold value is exceeded.

- Input (selectable): 0...10 V / 0...60 mV / ±10 V
- Accuracy: ± (0.2 % FS + 1 digit)
- 24 V power supply system for sensors and transducers