PCE-180 CBN is a handheld, portable, battery-powered wire tracer or cable locator that consists of an amplifier probe and acoustic signal or tone generator. This locating device is designed to detect wires or cables hidden behind walls or insulation.

- Uses an acoustic signal to detect wires and cables, including network and coaxial cables
- Features a 3-position toggle switch (and 3-color LED) for line polarity, continuity and voltage testing
- Comes with red and black test leads with alligator clips
- Includes 2-year warranty against manufacturer defects

 

- Evaluation of adhesion
- For thin, thick or tough coatings
- Large, non-slip grip
- Various blades selectable

 

- Display range: 0 ... 999999
- Input range: 0.1 Hz ... 1 kHz
- Display range revolutions 6 ... 60000 RPM
- 6-digit LED display
- Display of the pulses per revolution
- Adjustable divider via buttons

The building moisture meter has a measuring range of 0.0 … 100.0%. For a measurement, the ball head is positioned on the test object by the building moisture meter. This guarantees a non-destructive measurement with the building moisture meter. The building moisture meter is therefore used, for example, for on-site inspections of buildings, wood and other surfaces.

- Measuring range: 0.0 ... 100.0%
- Resolution: 0.1%
- Measuring depth: 20 ... 40 mm / 0.78 ... 1.57"
- Interface: Bluetooth 4.0
- Free Android and iOS app

The concrete moisture meter has a measuring range of 0.0 … 100.0%. For a measurement, the ball head is positioned on the test object by the concrete moisture meter. This guarantees a non-destructive measurement with the concrete moisture meter. The concrete moisture meter is therefore used, for example, for on-site inspections of buildings, wood and other surfaces.

- Measuring range: 0.0 ... 100.0%
- Resolution: 0.1%
- Measuring depth: 20 ... 40 mm / 0.78 ... 1.57"
- Interface: Bluetooth 4.0
- Free Android and iOS app

The damp meter has a measuring range of 0.0 … 100.0%. For a measurement, the ball head is positioned on the test object by the damp meter. This guarantees a non-destructive measurement with the damp meter. The damp meter is therefore used, for example, for on-site inspections of buildings, wood and other surfaces.

- Measuring range: 0.0 ... 100.0%
- Resolution: 0.1%
- Measuring depth: 20 ... 40 mm / 0.78 ... 1.57"
- Interface: Bluetooth 4.0
- Free Android and iOS app

The environmental meter has a measuring range of 0.0 … 100.0%. For a measurement, the ball head is positioned on the test object by the environmental meter. This guarantees a non-destructive measurement with the environmental meter. The environmental meter is therefore used, for example, for on-site inspections of buildings, wood and other surfaces.

- Measuring range: 0.0 ... 100.0%
- Resolution: 0.1%
- Measuring depth: 20 ... 40 mm / 0.78 ... 1.57"
- Interface: Bluetooth 4.0
- Free Android and iOS app

The environmental tester has a measuring range of 0.0 … 100.0%. For a measurement, the ball head is positioned on the test object by the environmental tester. This guarantees a non-destructive measurement with the environmental tester. The environmental tester is therefore used, for example, for on-site inspections of buildings, wood and other surfaces.

- Measuring range: 0.0 ... 100.0%
- Resolution: 0.1%
- Measuring depth: 20 ... 40 mm / 0.78 ... 1.57"
- Interface: Bluetooth 4.0
- Free Android and iOS app

The Material Tester PCE-CRC 10 is designed to determine the quality of the adhesion of coatings. The Material Tester is suitable for thin, thick or tough coatings on all surfaces. Since the adherence of paintings and other coatings is a crucial product and quality characteristic for their protective effect, material testers are used in a wide range of industries.

- Evaluation of adhesion
- For thin, thick or tough coatings
- Large, non-slip grip
- Various blades selectable

 

The moisture meter has a measuring range of 0.0 … 100.0%. For a measurement, the ball head is positioned on the test object by the moisture meter. This guarantees a non-destructive measurement with the moisture meter. The moisture meter is therefore used, for example, for on-site inspections of buildings, wood and other surfaces.

- Measuring range: 0.0 ... 100.0%
- Resolution: 0.1%
- Measuring depth: 20 ... 40 mm / 0.78 ... 1.57"
- Interface: Bluetooth 4.0
- Free Android and iOS app

The moisture tester for wood has a measuring range of 0.0 … 100.0%. For a measurement, the ball head is positioned on the test object by the moisture tester for wood. This guarantees a non-destructive measurement with the moisture tester for wood. The moisture tester for wood is therefore used, for example, for on-site inspections of buildings, wood and other surfaces.

- Measuring range: 0.0 ... 100.0%
- Resolution: 0.1%
- Measuring depth: 20 ... 40 mm / 0.78 ... 1.57"
- Interface: Bluetooth 4.0
- Free Android and iOS app

 

- Evaluation of adhesion
- For thin, thick or tough coatings
- Large, non-slip grip
- Various blades selectable

 

The panel indicator PCE-N24T is used for processing signals coming from temperature sensors. Depending on your specific needs, the digital indicator can be ordered with different inputs for thermocouples (type J, K) or resistance thermometers (Pt100). The input signal of the digital indicator is freely scalable, which increases its application possibilities.

 

- Power supply: 230 V, 110 V, 24 V, 20 ... 40 V AC/DC, 85 ... 253 V AC/DC (selectable)
- Input signal: PT100, Thermoelement Type J / K (selectable)
- Display: 4 digits, red
- Digit height: 20 mm

The Surface Tester PCE-CRC 10 is designed to determine the quality of the adhesion of coatings. The Surface Tester is suitable for thin, thick or tough coatings on all surfaces. Since the adherence of paintings and other coatings is a crucial product and quality characteristic for their protective effect, surface testers are used in a wide range of industries.

- Evaluation of adhesion
- For thin, thick or tough coatings
- Large, non-slip grip
- Various blades selectable

 

The digital temperature indicator PCE-N24T is used for processing signals coming from temperature sensors. Depending on your specific needs, the digital indicator can be ordered with different inputs for thermocouples (type J, K) or resistance thermometers (Pt100). The input signal of the digital indicator is freely scalable, which increases its application possibilities.

 

- Power supply: 230 V, 110 V, 24 V, 20 ... 40 V AC/DC, 85 ... 253 V AC/DC (selectable)
- Input signal: PT100, Thermoelement Type J / K (selectable)
- Display: 4 digits, red
- Digit height: 20 mm

The timber moisture meter has a measuring range of 0.0 … 100.0%. For a measurement, the ball head is positioned on the test object by the timber moisture meter. This guarantees a non-destructive measurement with the timber moisture meter. The timber moisture meter is therefore used, for example, for on-site inspections of buildings, wood and other surfaces.

- Measuring range: 0.0 ... 100.0%
- Resolution: 0.1%
- Measuring depth: 20 ... 40 mm / 0.78 ... 1.57"
- Interface: Bluetooth 4.0
- Free Android and iOS app

The wall moisture meter has a measuring range of 0.0 … 100.0%. For a measurement, the ball head is positioned on the test object by the wall moisture meter. This guarantees a non-destructive measurement with the wall moisture meter. The wall moisture meter is therefore used, for example, for on-site inspections of buildings, wood and other surfaces.

- Measuring range: 0.0 ... 100.0%
- Resolution: 0.1%
- Measuring depth: 20 ... 40 mm / 0.78 ... 1.57"
- Interface: Bluetooth 4.0
- Free Android and iOS app

The wood moisture meter has a measuring range of 0.0 … 100.0%. For a measurement, the ball head is positioned on the test object by the wood moisture meter. This guarantees a non-destructive measurement with the wood moisture meter. The wood moisture meter is therefore used, for example, for on-site inspections of buildings, wood and other surfaces.

- Measuring range: 0.0 ... 100.0%
- Resolution: 0.1%
- Measuring depth: 20 ... 40 mm / 0.78 ... 1.57"
- Interface: Bluetooth 4.0
- Free Android and iOS app

Extra long flexible high temperature sensor, handle and 1m spiral cable

- Tmax.: 1100 °C / 2012 °F
- Accuracy: ± 1.5 °C
- Diameter: Ø 3.0 mm
- Length: 1000 mm
- Thermocouple Type K

With the air humidity meter it is possible to determine the humidity, ambient, wet bulb and dew point temperature. Measurements up to 60 °C are possible with the air humidity meter. The air humidity meter can therefore be used universally because of its various measuring functions to determine the ambient conditions.

Measuring ranges:
- Humidity: 0 ... 100% RH
- Ambient temperature: -20 ... 60 °C / -4 ... 140 °F
- Wet bulb temperature: 0 ... 60 °C / 32 ... 140 °F
- Dew point temperature: -20 ... 60 °C / -4 ... 140 °F
- Interface: Bluetooth
- MIN / MAX / HOLD function