Industrial Measurement Products and Solutions
Order no.: PCE-WSAC 50W 24
The anemometer PCE-WSAC 50W is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine. The high measuring range of up to 50 m/s of the anemometer means stormy gusts can also be monitored.

- Measuring range up to 180 km / h
- Input: pulse, analogue (4 ... 20-mA) or radio transmission
- 4 ... 20-mA analog output
- Supply voltage: 24V DC
- Ambient temperature -20 ... 70°C / -4 ... 158°F
- units adjustable: km / h, mph, m / s
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CSM 2

A very precise color meter with 45°/0° viewing angle. ThIS very professional instrument works in color spaces CIEL*a*b*C*h*, CIEL*a*b*, and CIEXYZ. This kind of color meter is mainly made for the use in an R&D laboratory, for industrial product evaluation or for any kind of color testing application. The meter comes fully equipped (click on detail sheet) and is manufacturer calibrated. - A color meter for industrial professionals and researchers -


- Measuring aperture of 8 mm and 45°/0° illumination/viewing angle
- Rechargeable lithium-ion battery
- Auto white black calibration
- Designed specifically for the food industry
- Software Included
- Stores 100 reference values and 20,000 samples

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CSM 2

A very precise Colorimeter with 45°/0° viewing angle. This very professional instrument works in color spaces CIEL*a*b*C*h*, CIEL*a*b*, and CIEXYZ. This kind of color meter is mainly made for the use in an R&D laboratory, for industrial product evaluation, or for any kind of color testing application. The Colorimeter comes fully equipped (click on detail sheet) and is manufacturer calibrated. - A color meter for industrial professionals and researchers -


- Measuring aperture of 8 mm and 45°/0° illumination/viewing angle
- Rechargeable lithium-ion battery
- Auto white black calibration
- Designed specifically for the food industry
- Software Included
- Stores 100 reference values and 20,000 samples

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WSAC 50W 230
The anemometer PCE-WSAC 50W 230 is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine. The high measuring range of up to 50 m/s of the anemometer means stormy gusts can also be monitored.

- Measuring range up to 180 km / h
- Input: Pulse, analogue (4 ... 20-mA) or radio transmission
- 4 ... 20-mA analogue output
- Supply voltage: 110 ... 230V AC, 50/60 Hz
- Ambient temperature -20 .. . 70°C / -4 ... 158°F
- Units adjustable: km / h, mph, m / s
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CS 10000N-ICA

PCE-CS 10000N-ICA is a digital battery-powered heavy-duty industrial crane, lifter, suspended or hanging scale, dynamometer, electronic balance or weighing hook that displays measurement values in kilograms (kg) or pounds (lbs). The scale includes a hook, shackle, remote control and ISO calibration certificate.


- Maximum weighing capacity: 10000 kg / 22046 lbs ≈ 11 Tons
- Resolution: 5 kg
- Tare range: 100% full scale
- Includes ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CS 10000N-ICA

PCE-CS 10000N-ICA is a digital battery-powered heavy-duty industrial crane, lifter, suspended or hanging scale, dynamometer, electronic balance or weighing hook that displays measurement values in kilograms (kg) or pounds (lbs). The dynamometer includes a hook, shackle, remote control and ISO calibration certificate.


- Maximum weighing capacity: 10000 kg / 22046 lbs ≈ 11 Tons
- Resolution: 5 kg
- Tare range: 100% full scale
- Includes ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CS 10000N-ICA

PCE-CS 10000N-ICA is a digital battery-powered heavy-duty force gauge, industrial crane, lifter, suspended or hanging scale, dynamometer, electronic balance or weighing hook that displays measurement values in kilograms (kg) or pounds (lbs). The force gauge includes a hook, shackle, remote control and ISO calibration certificate.


- Maximum weighing capacity: 10000 kg / 22046 lbs ≈ 11 Tons
- Resolution: 5 kg
- Tare range: 100% full scale
- Includes ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CS 10000N-ICA

PCE-CS 10000N-ICA is a digital battery-powered heavy-duty industrial crane, lifter, suspended or hanging scale, dynamometer, electronic balance or weighing hook that displays measurement values in kilograms (kg) or pounds (lbs). The scale includes a hook, shackle, remote control and ISO calibration certificate.


- Maximum weighing capacity: 10000 kg / 22046 lbs ≈ 11 Tons
- Resolution: 5 kg
- Tare range: 100% full scale
- Includes ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CS 10000N-ICA

PCE-CS 10000N-ICA is a digital battery-powered heavy-duty industrial crane, lifter, suspended or hanging scale, dynamometer, electronic balance or weighing hook that displays measurement values in kilograms (kg) or pounds (lbs). The heavy duty scale includes a hook, shackle, remote control and ISO calibration certificate.


- Maximum weighing capacity: 10000 kg / 22046 lbs ≈ 11 Tons
- Resolution: 5 kg
- Tare range: 100% full scale
- Includes ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CSM 2

A very precise Colorimeter with 45°/0° viewing angle. This very professional instrument works in color spaces CIEL*a*b*C*h*, CIEL*a*b*, and CIEXYZ. This kind of color meter is mainly made for the use in an R&D laboratory, for industrial product evaluation, or for any kind of color testing application. The Colorimeter comes fully equipped (click on detail sheet) and is manufacturer calibrated. - A color meter for industrial professionals and researchers -


- Measuring aperture of 8 mm and 45°/0° illumination/viewing angle
- Rechargeable lithium-ion battery
- Auto white and black calibration
- Designed specifically for the food industry
- Software Included
- Stores 100 reference values and 20,000 samples

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-FB 100TW
The torque wrench tester of the PCE-TWM series can test torque wrenches up to 500 Nm, depending on the sensor. Due to the precise evaluation electronics, the torque wrench tester has a measurement accuracy of 0.5 % of the measurement range. The torque wrench is fixed by means of a 1/4' female square. The torque wrench tester consists of an evaluation unit and an external torque transducer with a cable which makes the measurement setup convenient.


- Measurement range: 100 Nm (10 kgfm)
- Resolution: 0.1 Nm
- Accuracy: ±0.5 % of measurement range
- Units of measurement: Nm, Ncm, kgfm, lbfin, gfm
- Calibration: possible with external F2 weights
- Max. Overload: 50 % of measurement range
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CS 10000N-ICA

PCE-CS 10000N-ICA is a digital battery-powered heavy-duty industrial crane, lifter, suspended or hanging scale, dynamometer, electronic balance or weighing hook scale that displays measurement values in kilograms (kg) or pounds (lbs). The scale includes a hook, shackle, remote control and ISO calibration certificate.


- Maximum weighing capacity: 10000 kg / 22046 lbs ≈ 11 Tons
- Resolution: 5 kg
- Tare range: 100% full scale
- Includes ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WSAC 50W 230
The wind speed alarm controller PCE-WSAC 50W 230 is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine. The high measuring range of up to 50 m/s of the wind speed alarm controller means stormy gusts can also be monitored.

- Measuring range up to 180 km / h
- Input: Pulse, analogue (4 ... 20-mA) or radio transmission
- 4 ... 20-mA analogue output
- Supply voltage: 110 ... 230V AC, 50/60 Hz
- Ambient temperature -20 .. . 70°C / -4 ... 158°F
- Units adjustable: km / h, mph, m / s
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WSAC 50W 24
The wind speed alarm controller PCE-WSAC 50W is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine. The high measuring range of up to 50 m/s of the wind speed alarm controller means stormy gusts can also be monitored.

- Measuring range up to 180 km / h
- Input: pulse, analogue (4 ... 20-mA) or radio transmission
- 4 ... 20-mA analog output
- Supply voltage: 24V DC
- Ambient temperature -20 ... 70°C / -4 ... 158°F
- units adjustable: km / h, mph, m / s
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WSAC 50W 230
The Wind Speed Meter PCE-WSAC 50W 230 is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine. The high measuring range of up to 50 m/s of the wind speed meter means stormy gusts can also be monitored.

- Measuring range up to 180 km / h
- Input: Pulse, analogue (4 ... 20-mA) or radio transmission
- 4 ... 20-mA analogue output
- Supply voltage: 110 ... 230V AC, 50/60 Hz
- Ambient temperature -20 .. . 70°C / -4 ... 158°F
- Units adjustable: km / h, mph, m / s
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WSAC 50W 24
The Wind Speed Meter PCE-WSAC 50W is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine. The high measuring range of up to 50 m/s of the wind speed meter means stormy gusts can also be monitored.

- Measuring range up to 180 km / h
- Input: pulse, analogue (4 ... 20-mA) or radio transmission
- 4 ... 20-mA analog output
- Supply voltage: 24V DC
- Ambient temperature -20 ... 70°C / -4 ... 158°F
- units adjustable: km / h, mph, m / s
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: Xgard-1-H2

The Xgard-1-H2 is a single-gas Gas Leak Detector used to warn for gases (Hydrogen, H2, 0 ... 2000 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Hydrogen, H2, 0 ... 2000 ppm)
- Additional display and alarm station
- ATEX or UL approval

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: PCE-RS 90

A super bright miniature light-emitting diode on the lens of the Inspection Camera lightens even the darkest corners. Due to the extremely long life of LED, a change of the bulb is not necessary any more. Due to the adjustable brightness control on the Inspection Camera, an adaptation of the light strength for different application cases is possible without any problems.


- Diameter: 9 mm / 0.4 in
- Working length: 275 mm / 10.8 in
- Light weight
- Li-ion battery pack
- Ergonomic design
- Light temperature 5300°K

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RS 90

A super bright miniature light-emitting diode on the lens of the rigid industrial borescope lightens even the darkest corners. Due to the extremely long life of LED, a change of the bulb is not necessary any more. Due to the adjustable brightness control on the borescope, an adaptation of the light strength for different application cases is possible without any problems.


- Diameter: 9 mm / 0.4 in
- Working length: 275 mm / 10.8 in
- Light weight
- Li-ion battery pack
- Ergonomic design
- Light temperature 5300°K

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: VIS 200

The VIS 200 drain camera serves for the simple analysis of weak spots in wastewater pipes, as well as the maintenance of downpipes and exhaust gas lines. The drain camera can either be battery-operated or supplied by power-adapter. The equipment is delivered in a hard case, compact and impresses with its easy handling as well as its quick readiness.


- Camera head of Ø 26 mm
- Water-resistant camera head
- Light sensitivity of 0.5 lux
- 7 " TFT monitor
- Push rod of 20 m length
- Battery operation up to 4 h
- 12 bright LEDs

 

Manufacturer: Wöhler Messgeräte Kehrgeräte GmbH
Test Instruments manufacturer