Industrial Measurement Products and Solutions
Order no.: PCE-DX-AS

Mechanical shore durometer for measuring hardness of soft elastomer with drag needle. The shore durometer is composed of a single component with a measuring head and a 360º dial. To improve the readability of peak value, the device comes with a drag needle, that ensures the maximum reading can be captured. Once it has been measured, it can be reset to zero. 


- Force of pressure: 0 to 12.5 N
- Penetrating body: 35º (according to Shore A)
- Equipped with drag needle
- Measurement range: 10 ... 90
  (pressure diminishes below 10 and above 90)
- Margin of error: ± 1
- Division of scale: 1

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DX-AS

Mechanical hardness tester for measuring hardness of soft elastomer with drag needle. The shore hardness tester is composed of a single component with a measuring head and a 360º dial. To improve the readability of peak value, the device comes with a drag needle, that ensures the maximum reading can be captured. Once it has been measured, it can be reset to zero. 

- Force of pressure: 0 to 12.5 N
- Penetrating body: 35º (according to Shore A)
- Measurement range: 10 ... 90 (pressure diminishes below 10 and above 90)
- Margin of error: ± 1
- Division of scale: 1

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-P20Z

The PCE-P20Z transmitter is used to convert a measured current into a standard signal. This makes it possible to determine the most diverse currents with the transmitter.

- Input: Alternating current
- Various supply voltages
- For direct or indirect current measurement
- Current transformer can be connected
- With voltage output or current output

Note: This item must be configured before ordering!

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-P20Z

The PCE-P20Z measuring transducer measures voltages up to 600 V AC and converts this into a standard signal. Depending on the design, the PCE-P20U-I transducer can measure voltages up to 250 V AC, 400 V AC or 600 V AC and outputs a 4 ... 20 mA standard signal. Depending on the model, the supply voltage of the transducers is either 85 ... 253 V AC / DC or 20 ... 40 V AC / DC.

- RMS Measurement of voltages up to 600 V AC
- Input: AC voltage
- Output: 4 ... 20 mA or 0 ... 10 V Standard signal
- Various supply voltages

Note: This item must be configured before ordering!

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WS P
The Air Flow Meter impresses with its compact design and various output signals. The air flow meter can be used for applications in warning technology, building automation and home technology. 

- Measuring range:  0.8 m / s ... 50 m / s
- Measurement from: ≤0.8 m / s
- Output: pulses (reed contact)
- IP 65 protection 
- mA, V, pulse or Modbus output
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WS P
The Air Velocity Meter impresses with its compact design and various output signals. The Air Velocity Meter can be used for applications in warning technology, building automation and home technology. 

- Measuring range:  0.8 m / s ... 50 m / s
- Measurement from: ≤0.8 m / s
- Output:  pulses (reed contact)
- IP 65 protection 
- mA, V, pulse or Modbus output
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WS P
The Anemometer impresses with its compact design and various output signals. The Anemometer can be used for applications in warning technology, building automation and home technology. 

- Measuring range:  0.8 m / s ... 50 m / s
- Measurement from: ≤0.8 m / s
- Output:  pulses (reed contact)
- IP 65 protection 
- mA, V, pulse or Modbus output
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WS P
The Environmental Meter impresses with its compact design and various output signals. The Environmental Meter can be used for applications in warning technology, building automation and home technology.

- Measuring range:  0.8 m / s ... 50 m / s
- Measurement from: ≤0.8 m / s
- Output: pulses (reed contact)
- IP 65 protection 
- mA, V, pulse or Modbus output
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WS P
The Environmental Tester impresses with its compact design and various output signals. The Environmental Tester can be used for applications in warning technology, building automation and home technology.

- Measuring range:  0.8 m / s ... 50 m / s
- Measurement from: ≤0.8 m / s
- Output:  pulses (reed contact)
- IP 65 protection 
- mA, V, pulse or Modbus output
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WS P
The Weather Station impresses with its compact design and various output signals. The Weather Station can be used for applications in warning technology, building automation and home technology. 

- Measuring range:  0.8 m / s ... 50 m / s
- Measurement from: ≤0.8 m / s
- Output:  pulses (reed contact)
- IP 65 protection 
- mA, V, pulse or Modbus output
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WS P
The Wind Measurement Device impresses with its compact design and various output signals. The Wind Measurement Device can be used for applications in warning technology, building automation and home technology. 

- Measuring range:  0.8 m / s ... 50 m / s
- Measurement from: ≤0.8 m / s
- Output:  pulses (reed contact)
- IP 65 protection 
- mA, V, pulse or Modbus output
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WS P
The Wind Speed Meter impresses with its compact design and various output signals. The Wind Speed Meter can be used for applications in warning technology, building automation and home technology. 

- Measuring range:  0.8 m / s ... 50 m / s
- Measurement from: ≤0.8 m / s
- Output:  pulses (reed contact)
- IP 65 protection 
- mA, V, pulse or Modbus output
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HFX 100
The air humidity meter PCE-HFX 100 is specially designed for monitoring indoor ventilation. We all know how the importance of the indoor climate in the workplace, in schools, kindergartens etc. The performance of an individual depends on the air quality at the workplace.

Measuring function
- Formaldehyde HCHO: 0 ... 2 mg/m³
- Temperature: -10 ... 50°C / 14 ... 122°F
- Humidity: 0 ... 99% r.H.
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HT 112
The air humidity meter PCE-HT 112 is compact, very small and equipped with a display. The PCE-HT 112 air humidity meter records the temperature and humidity indoors with its integrated sensor and simultaneously displays it via the LCD display.

Measuring function
- Temperature: -30 ... 65°C / -22 ... 149°F (Internal)
                          -40 ... 125°C / -40 ... 257°F (external)
- Humidity: 0 ... 100% RH (Internal & External)
- Memory for 25,920 readings
- Saves as PDF
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HFX 100
The air quality meter PCE-HFX 100 is specially designed for monitoring indoor ventilation. We all know how the importance of the indoor climate in the workplace, in schools, kindergartens etc. The performance of an individual depends on the air quality at the workplace.

Measuring function
- Formaldehyde HCHO: 0 ... 2 mg/m³
- Temperature: -10 ... 50°C / 14 ... 122°F
- Humidity: 0 ... 99% r.H.
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-BS 3000

The Analytical Balance PCE-BS 3000 is a light, rugged precision balance suitable for different purposes. The removable stainless steel pan allows the laboratory balance to be cleaned easily. The Analytical Balance PCE-BS 3000 can be used for weighing as well as for piece counting.


- Weighing capacity: Max. 3000 g
- Readability (g): 0.1
- Repeatability (g): 0.1
- Calibratable

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-N16O
The built-in display is an adjustable gauge to visualize pulses from speed sensors. This built-in display is able to display the pulses per revolution.

- Display range: 0 ... 999999
- Input range: 0.1 Hz ... 1 kHz
- Display range revolutions 6 ... 60000 RPM
- 6-digit LED display
- Display of the pulses per revolution
- Adjustable divider via buttons
Catalogue: Control Systems
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-LT 12
The cable detector is a versatile measuring instrument. In addition to the standard voltage and current measurements, the cable detector also has a network analysis. With this network analysis, the cable detector can be used to check, for example, LAN connections for their correct wiring and function.

Measurement function:
- AC voltage
- DC voltage
- AC
- DC
- Resistance
- Diode measurement
- Continuity test
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-LT 12
The cable fault meter is a versatile measuring instrument. In addition to the standard voltage and current measurements, the cable fault meter also has a network analysis. With this network analysis, the cable fault meter can be used to check, for example, LAN connections for their correct wiring and function.

Measurement function:
- AC voltage
- DC voltage
- AC
- DC
- Resistance
- Diode measurement
- Continuity test
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-LT 12
The cable locator is a versatile measuring instrument. In addition to the standard voltage and current measurements, the cable locator also has a network analysis. With this network analysis, the cable locator can be used to check, for example, LAN connections for their correct wiring and function.

Measurement function:
- AC voltage
- DC voltage
- AC
- DC
- Resistance
- Diode measurement
- Continuity test
Manufacturer: PCE Instruments
Test Instruments manufacturer