Order no.: HFX205

This Formaldehyde Meter HFX205 is designed to detect formaldehyde in air. The Formaldehyde Meter HFX205 shows the formaldehyde-concentration on site and thereby avoids time-consuming and expensive analysis in laboratories. The Formaldehyde Meter HFX205 runs with the help of an electromechanical sensor and is designed to determine the current permitted limit. A measurement can be accomplished in less than 30 seconds.


- Range Formaldehyde: 0…10 ppm
- Short reaction time
- Real-time display
- Manual and auto data storage
- High-speed USB
- Software for Online Data transfer

Manufacturer: HAL TECHNOLOGY, LLC
Test Instruments manufacturer
Order no.: HFX205

This Gas Leak Detector is designed to detect formaldehyde in air. The Gas Leak Detector shows the formaldehyde-concentration on site and thereby avoids time-consuming and expensive analysis in laboratories. The formaldehyde Gas Leak Detector runs with the help of an electromechanical sensor and is designed to determine the current permitted limit. A measurement can be accomplished in less than 30 seconds.


- Measuring range: 0…10 ppm
- Short reaction time
- Real-time display
- Manual and auto data storage
- High-speed USB
- Software for Online Data transfer

Manufacturer: HAL TECHNOLOGY, LLC
Test Instruments manufacturer
Order no.: PCE-DPM 3-ICA
The humidity detector is a mobile testing device for monitoring the quality of compressed air on stationary and mobile compressed air generators. This humidity detector measures the temperature, the relative humidity, H2O and calculates the current dew point up to an ambient pressure of 20 bar.

- Dew point, H2O, temperature, humidity measurement
- Data memory for approx. 50,000 measurement data
- CSV data export
- With G1 / 2" connection thread
- For inline measurement of pressure pipes
- Sensor protected with a cap
- Left connection has NO function
- incl. ISO Calibration Certificate for humidity and temperature
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DPM 3-ICA
The HVAC meter is a mobile testing device for monitoring the quality of compressed air on stationary and mobile compressed air generators. This HVAC meter measures the temperature, the relative humidity, H2O and calculates the current dew point up to an ambient pressure of 20 bar.

- Dew point, H2O, temperature, humidity measurement
- Data memory for approx. 50,000 measurement data
- CSV data export
- With G1 / 2" connection thread
- For inline measurement of pressure pipes
- Sensor protected with a cap
- Left connection has NO function
- incl. ISO Calibration Certificate for humidity and temperature
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DPM 3-ICA
The hygrometer is a mobile testing device for monitoring the quality of compressed air on stationary and mobile compressed air generators. This hygrometer measures the temperature, the relative humidity, H2O and calculates the current dew point up to an ambient pressure of 20 bar.

- Dew point, H2O, temperature, humidity measurement
- Data memory for approx. 50,000 measurement data
- CSV data export
- With G1 / 2" connection thread
- For inline measurement of pressure pipes
- Sensor protected with a cap
- Left connection has NO function
- incl. ISO Calibration Certificate for humidity and temperature
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DPM 3-ICA
The moisture meter is a mobile testing device for monitoring the quality of compressed air on stationary and mobile compressed air generators. This moisture meter measures the temperature, the relative humidity, H2O and calculates the current dew point up to an ambient pressure of 20 bar.

- Dew point, H2O, temperature, humidity measurement
- Data memory for approx. 50,000 measurement data
- CSV data export
- With G1 / 2" connection thread
- For inline measurement of pressure pipes
- Sensor protected with a cap
- Left connection has NO function
- incl. ISO Calibration Certificate for humidity and temperature
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PCO 2

PCE-PCO 2 is a portable handheld particle counter used to monitor particulate matter (PM) concentrations in the air. Designed to aid in indoor air quality (IAQ) assessments, this particle counter also measures air temperature, dew point and relative humidity.


- PM channels: PM 2.5, PM 10, including mass concentration mode (µg/m³)
- Particle sizes (in micrometers): 0.3 µm, 0.5 µm, 1.0 µm, 2.5 µm, 5.0 µm, 10 µm
- Temp. measuring range: 0 ... +50 °C / +32 ... +122 °F
- Humidity measuring range: 0 ... 100 % RH
- Built-in camera for image and video recording
- Free software download on PCE Software web page

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DPM 3-ICA
The thermo-hygrometer is a mobile testing device for monitoring the quality of compressed air on stationary and mobile compressed air generators. This thermo-hygrometer measures the temperature, the relative humidity, H2O and calculates the current dew point up to an ambient pressure of 20 bar.

- Dew point, H2O, temperature, humidity measurement
- Data memory for approx. 50,000 measurement data
- CSV data export
- With G1 / 2" connection thread
- For inline measurement of pressure pipes
- Sensor protected with a cap
- Left connection has NO function
- incl. ISO Calibration Certificate for humidity and temperature
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WSM 100
The camera microscope PCE-WMS 100 is the ideal aid for repair and service workshops. Thanks to the movable camera arm, the camera can be precisely aligned by the camera microscope on the object to be optically examined.

- Resolution: 2304 x 1536 pixels
- Magnification: 4.8x ... 220x
- Light source: LED ring light
- Full-HD resolution
- HDMI & USB interface
- SD memory to 64 GB
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-IVE 330

The PCE-IVE 330 Industrial Endoscope is used to diagnose and monitor hard-to-reach areas on vehicles, containers, machinery and equipment. Thanks to the 3 m telescopic rod of the industrial endoscope, it is also possible to view areas that are difficult to access. Visual monitoring with the industrial endoscope is supported by the flexible camera head.


- flexible camera head
- 8" LCD monitor
- up to three meters long
- diameter of the camera: 23 mm / 0.9 in
- memory function

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-IVE 330

The PCE-IVE 330 industrial borescope is used to diagnose and monitor hard-to-reach areas on vehicles, containers, machinery and equipment. Thanks to the 3 m / 9.8 ft telescopic rod of the borescope, it is also possible to view areas that are difficult to access. Visual monitoring with the borescope is supported by the flexible camera head.


- Flexible camera head
- 8" LCD monitor
- Up to three meters long
- Diameter of the camera: 23 mm / 0.9 in
- Memory function

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 30CR

The industrial scales PCE-SD CR series find their application both in many production areas as well as in shipping areas. The industrial scales features a standard RS-232 interface. In addition the industrial scales PCE-SD CR series can be equipped with further interfaces.


- Weighing capacity: 30 kg
- Readability: 10 g
- Verifiable M III

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 150CR
The industrial scales PCE-SD CR series finds their application both in many production areas as well as in shipping areas. The industrial scales features a standard RS-232 interface. In addition the industrial scales PCE-SD CR series can be equipped with further interfaces.

- Weighing capacity: 150 kg

- Readability: 50g
- Verifiable M III
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 60CR
The industrial scales PCE-SD CR series finds their application both in many production areas as well as in shipping areas. The industrial scales features a standard RS-232 interface. In addition the industrial scales PCE-SD CR series can be equipped with further interfaces.

- Weighing capacity: 60 kg

- Readability: 20g
- Verifiable M III
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WSM 100
The Inspection Camera PCE-WMS 100 is the ideal aid for repair and service workshops. Thanks to the movable camera arm, the camera can be precisely aligned by the inspection camera on the object to be optically examined.

- Resolution: 2304 * 1536 pixels
- Magnification: 4.8x ... 220x
- Light source: LED ring light
- Full-HD resolution
- HDMI & USB interface
- SD memory to 64 GB
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-IVE 330

The PCE-IVE 330 inspection camera is used to diagnose and monitor hard-to-reach areas on vehicles, containers, machinery and equipment. Thanks to the 3 m / 9.8 ft  telescopic rod of the inspection camera, it is also possible to view areas that are difficult to access. Visual monitoring with the inspection camera is supported by the flexible camera head.


- Flexible camera head
- 8" LCD monitor
- Up to three meters long
- Diameter of the camera: 23 mm / 0.9 in
- Memory function

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 150CR
The parcel scale PCE-SD CR series finds its application both in many production areas as well as in shipping areas. The parcel scale features a standard RS-232 interface. In addition the parcel scale PCE-SD CR series can be equipped with further interfaces.

- Weighing capacity: 150 kg

- Readability: 50g
- Verifiable M III
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 30CR

The parcel scale PCE-SD CR series finds its application both in many production areas as well as in shipping areas. The parcel scale features a standard RS-232 interface. In addition the parcel scale PCE-SD CR series can be equipped with further interfaces.


- Weighing capacity: 30 kg
- Readability: 10 g
- Verifiable M III

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 60CR
The parcel scale PCE-SD CR series finds its application both in many production areas as well as in shipping areas. The parcel scale features a standard RS-232 interface. In addition the parcel scale PCE-SD CR series can be equipped with further interfaces.

- Weighing capacity: 60 kg

- Readability: 20g
- Verifiable M III
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 150CR
The platform scale PCE-SD CR series finds its application both in many production areas as well as in shipping areas. The platform scale features a standard RS-232 interface. In addition the platform scale PCE-SD CR series can be equipped with further interfaces.

- Weighing capacity: 150 kg

- Readability: 50g
- Verifiable M III
Manufacturer: PCE Instruments
Test Instruments manufacturer