Industrial Measurement Products and Solutions
Order no.: PCE-THB 38

Multifunction PCE-THB 38 air humidity meter to measure a range of parameters: humidity, temperature, barometric pressure (dewpoint temperature is calculated). The air humidity meter also shows atmospheric pressure in a range of 10 to 1100hPa. With all of these features, it is a complete climatological device. The test instrument is shipped manufacturer calibrated. Otherwise, a laboratory calibration and certification can be ordered optionally to meet ISO or requirements.


- Temperature: 0 ... 50°C / 32 ... 122°F
- Relative air humidity: 10 ... 95% r.h.
- Barometric pressure: 10 ... 1100 hPa (mbar) / 0.14 psi ... 16 psi.
- Dew point temperature: -25 ... 49°C / -13 ... 120°F
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-THB 38

The PCE-THB 38 Climate Meter is ideal for detecting and digitally displaying humidity, temperature and barometric pressure. Temperature is measured by an RTD sensor and air humidity is measured by a highly repeatable, capacitive sensor. All products are test instruments, and the Climate Meter is sent out manufacturer calibrated. An ISO certification is available optionally.


- Temperature: 0 ... 50°C / 32 ... 122°F
- Relative air humidity: 10 ... 95% r.h.
- Barometric pressure: 10 ... 1100 hPa (mbar) / 0.14 psi ... 16 psi.
- Dew point temperature: -25 ... 49°C / -13 ... 120°F
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-THB 38

The PCE-THB 38 Dew Point Thermometer is ideal for detecting and digitally displaying humidity, temperature and barometric pressure. Temperature is measured by an RTD sensor and air humidity is measured by a highly repeatable, capacitive sensor. All products are test instruments, and the Dew Point Thermometer is sent out manufacturer calibrated. An ISO certification is available optionally.


- Temperature: 0 ... 50°C / 32 ... 122°F
- Relative air humidity: 10 ... 95% r.h.
- Barometric pressure: 10 ... 1100 hPa (mbar) / 0.14 psi ... 16 psi.
- Dew point temperature: -25 ... 49°C / -13 ... 120°F
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DX-AS

Mechanical shore durometer for measuring hardness of soft elastomer with drag needle. The shore durometer is composed of a single component with a measuring head and a 360º dial. To improve the readability of peak value, the device comes with a drag needle, that ensures the maximum reading can be captured. Once it has been measured, it can be reset to zero. 


- Force of pressure: 0 to 12.5 N
- Penetrating body: 35º (according to Shore A)
- Equipped with drag needle
- Measurement range: 10 ... 90
  (pressure diminishes below 10 and above 90)
- Margin of error: ± 1
- Division of scale: 1

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-THB 38

The PCE-THB 38 Environmental Meter is ideal for detecting and digitally displaying humidity, temperature and barometric pressure. Temperature is measured by an RTD sensor and air humidity is measured by a highly repeatable, capacitive sensor. All products are test instruments, and the Environmental Meter is sent out manufacturer calibrated. An ISO certification is available optionally.


- Temperature: 0 ... 50°C / 32 ... 122°F
- Relative air humidity: 10 ... 95% r.h.
- Barometric pressure: 10 ... 1100 hPa (mbar) / 0.14 psi ... 16 psi.
- Dew point temperature: -25 ... 49°C / -13 ... 120°F
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-THB 38

The PCE-THB 38 Environmental Tester is ideal for detecting and digitally displaying humidity, temperature and barometric pressure. Temperature is measured by an RTD sensor and air humidity is measured by a highly repeatable, capacitive sensor. All products are test instruments, and the Environmental Tester is sent out manufacturer calibrated. An ISO certification is available optionally.


- Temperature: 0 ... 50°C / 32 ... 122°F
- Relative air humidity: 10 ... 95% r.h.
- Barometric pressure: 10 ... 1100 hPa (mbar) / 0.14 psi ... 16 psi.
- Dew point temperature: -25 ... 49°C / -13 ... 120°F
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-THB 38

The PCE-THB 38 Humidity Detector is ideal for detecting and digitally displaying humidity, temperature and barometric pressure. Temperature is measured by an RTD sensor and air humidity is measured by a highly repeatable, capacitive sensor. All products are test instruments, and the Humidity Detector is sent out manufacturer calibrated. An ISO certification is available optionally.


- Temperature: 0 ... 50°C / 32 ... 122°F
- Relative air humidity: 10 ... 95% r.h.
- Barometric pressure: 10 ... 1100 hPa (mbar) / 0.14 psi ... 16 psi.
- Dew point temperature: -25 ... 49°C / -13 ... 120°F
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DX-AS

Mechanical hardness tester for measuring hardness of soft elastomer with drag needle. The shore hardness tester is composed of a single component with a measuring head and a 360º dial. To improve the readability of peak value, the device comes with a drag needle, that ensures the maximum reading can be captured. Once it has been measured, it can be reset to zero. 

- Force of pressure: 0 to 12.5 N
- Penetrating body: 35º (according to Shore A)
- Measurement range: 10 ... 90 (pressure diminishes below 10 and above 90)
- Margin of error: ± 1
- Division of scale: 1

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-THB 38

The PCE-THB 38 Hygrometer is ideal for detecting and digitally displaying humidity, temperature and barometric pressure. Temperature is measured by an RTD sensor and air humidity is measured by a highly repeatable, capacitive sensor. All products are test instruments, and the Hygrometer is sent out manufacturer calibrated. An ISO certification is available optionally.


- Temperature: 0 ... 50°C / 32 ... 122°F
- Relative air humidity: 10 ... 95% r.h.
- Barometric pressure: 10 ... 1100 hPa (mbar) / 0.14 psi ... 16 psi.
- Dew point temperature: -25 ... 49°C / -13 ... 120°F
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-THB 38

Multifunction PCE-THB 38 manometer to measure a range of parameters: humidity, temperature, barometric pressure (dewpoint temperature is calculated). The manometer also shows atmospheric pressure in a range of 10 to 1100hPa. With all of these features, it is a complete climatological device. The test instrument is shipped manufacturer calibrated. Otherwise, a laboratory calibration and certification can be ordered optionally to meet ISO or requirements.


- Temperature: 0 ... 50°C / 32 ... 122°F
- Relative air humidity: 10 ... 95% r.h.
- Barometric pressure: 10 ... 1100 hPa (mbar) / 0.14 psi ... 16 psi.
- Dew point temperature: -25 ... 49°C / -13 ... 120°F
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-THB 38

The PCE-THB 38 Relative Humidity Meter is ideal for detecting and digitally displaying humidity, temperature and barometric pressure. Temperature is measured by an RTD sensor and air humidity is measured by a highly repeatable, capacitive sensor. All products are test instruments, and the Relative Humidity Meter is sent out manufacturer calibrated. An ISO certification is available optionally.


- Temperature: 0 ... 50°C / 32 ... 122°F
- Relative air humidity: 10 ... 95% r.h.
- Barometric pressure: 10 ... 1100 hPa (mbar) / 0.14 psi ... 16 psi.
- Dew point temperature: -25 ... 49°C / -13 ... 120°F
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-THB 38

The PCE-THB 38 Temperature Meter is ideal for detecting and digitally displaying humidity, temperature and barometric pressure. Temperature is measured by an RTD sensor and air humidity is measured by a highly repeatable, capacitive sensor. All products are test instruments, and the Temperature Meter is sent out manufacturer calibrated. An ISO certification is available optionally.


- Temperature: 0 ... 50°C / 32 ... 122°F
- Relative air humidity: 10 ... 95% r.h.
- Barometric pressure: 10 ... 1100 hPa (mbar) / 0.14 psi ... 16 psi.
- Dew point temperature: -25 ... 49°C / -13 ... 120°F
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VD 3

The PCE-VD 3 Vibration Meter is a miniaturized universal Vibration Meter with an included built-in three-axes acceleration sensor (X, Y, Z axis). The internal sensor of the PCE-VD 3 Vibration Meter measures acceleration force along the X, Y, and Z axes with a measurement range of ±18 g per axis. Especially made for use in machine condition monitoring.


- 3-axis vibration data logging
- Software included -USB port
- Light weight
- Stand included
- Storage capacity: 4 Mbit (85764 records)
- Magnetic wall mount

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-P20Z

The PCE-P20Z transmitter is used to convert a measured current into a standard signal. This makes it possible to determine the most diverse currents with the transmitter.

- Input: Alternating current
- Various supply voltages
- For direct or indirect current measurement
- Current transformer can be connected
- With voltage output or current output

Note: This item must be configured before ordering!

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-LED 20

PCE-LED 20 is a light meter with an external LED light sensor. The cable of the LED light sensor has a length of approximately 1.5 m / 4.9 ft.


- Measuring range: 40 / 400 / 4000 / 40000 / 400000 lx or fc
- Measuring units (selectable): Lux (lx) or footcandle (fc)
- Accuracy: ± 3% (with a standard incandescent lamp at 2856 K and LED white light), ± 6% for other visible light sources

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-LED 20

PCE-LED 20 is a lux meter with an external LED light sensor. The cable of the LED light sensor has a length of approximately 1.5 m / 4.9 ft.


- Measuring range: 40 / 400 / 4000 / 40000 / 400000 lx or fc
- Measuring units (selectable): Lux (lx) or footcandle (fc)
- Accuracy: ± 3% (with a standard incandescent lamp at 2856 K and LED white light), ± 6% for other visible light sources

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VD 3

The 3-axis Shock Data Logger PCE-VD 3 is a miniaturized universal Data Logger with an included built-in 3-axis acceleration sensor (X, Y, Z axes). The internal sensor of the 3-Axis Shock Data Logger PCE-VD 3 measures acceleration force along the X, Y, and Z axes with a measurement range of ±18 g per axis. These 3-Axis Shock Data Logger PCE-VD 3 are manufacturer calibrated. An ISO calibration certificate is an option.


- 3-axis vibration data logging
- Software included -USB port
- Light weight
- Stand included
- Storage capacity: 4 Mbit (85764 records)
- Magnetic wall mount

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VD 3

The PCE-VD 3 Vibration analyzer is a miniaturized universal Vibration analyzer with an included built-in three-axes acceleration sensor (X, Y, Z axis). The internal sensor of the PCE-VD 3 Vibration analyzer measures acceleration force along the X, Y, and Z axes with a measurement range of ±18 g per axis.


- 3-axis vibration data logging
- Software included -USB port
- Light weight
- Stand included
- Storage capacity: 4 Mbit (85764 records)
- Magnetic wall mount

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VD 3

PCE-VD 3 is a vibration data logger that measures 3-axis shock/vibration via a built-in accelerometer sensor. This vibration data logger records 3-axis acceleration (X, Y, Z) vibration measurement data for Fast Fourier Transform (FFT) waveform analysis. The vibration data logger connects to your PC via a USB port for configuration and for quick and easy data transfer.


- Measuring range: ±18 g per axis
- Frequency range: 0 ... 60 Hz
- Recording interval: Adjustable from 1 sec .... 24 hr
- Logs and stores up to 85,764 records
- Includes magnetic bracket with wall-mounting screws

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VD 3

The PCE-VD 3 Vibration Meter is a miniaturized universal Vibration Meter with an included built-in three-axes acceleration sensor (X, Y, Z axis). The internal sensor of the PCE-VD 3 Vibration Meter measures acceleration force along the X, Y, and Z axes with a measurement range of ±18 g per axis. This device is specially made for the use at industrial machinery.


- 3-axis vibration data logging instrument
- Software included / USB port
- Light weight
- Stand included
- Storage capacity: 4 Mbit (85764 records)
- Magnetic wall mount

 

Manufacturer: PCE Instruments
Test Instruments manufacturer