Query results | PCE Instruments

£ 88.00

Price excl. VAT &. delivery

The laboratory scale PCE-BSW 3 is an ideal companion for mobile use. Thanks to this second indicator on the laboratory scale, several viewers can follow a weighing process and analyze it.

Measuring range: 0 … 3000 g / 0 … 6.6 lbs
Resolution: 0.1 g
Large contact surface of 235 x 190 mm / 9.3 x 7.5 in
Different measuring ranges
Battery operation for mobile use
Front and back display

Manometer PCE-PME 40

£ 88.00

Price excl. VAT &. delivery

The digital Manometer is an accurate and compact meter for differential pressure measurement in a wide range of applications, such as measuring filter resistances, pressure in furnaces, orifices, gas-air ratio equalisation, combustion processes, air conditioning systems, ventilation systems, etc. The Manometer is suitable for measuring non-aggressive and non-explosive gases.

measurement range -40 ... +40 kPa (-400 ... +400 mbar)
resolution 0.01 kPa
accuracy: ±1 % FS
MAX, MIN, AVG value, HOLD
audible alarm
13 selectable pressure units
USB-C with data transfer
PC software

Material Hardness Tester PCE-DD-D Shore D

£ 88.00

Price excl. VAT &. delivery

PCE-DD-D is a Shore D durometer or material hardness tester. This Shore D hardness tester uses an impact rod with a 30º conical point and 50 Newtons (N) of force to make a surface indentation on material samples with a minimum thickness of 6 mm or 0.24". Calibration is not available for this item.

For Shore D hardness testing of hard rubber, hard resin, acrylic, glass, thermoplastic and more
Measurement range: 0 … 100 Shore D
Accuracy: ± 2 Hardness - Grade

Material Tester PCE-DD-A Shore A

£ 88.00

Price excl. VAT &. delivery

The PCE-DD-A material tester is used to measure Shore A hardness in soft gums, rubber, elastomers and more. Calibration is not available for this item.

Measurement area: 0 … 100 Shore A
Resolution: 0.5
Accuracy: ± 1
Depth of indentation: 0 … 2.5 mm / .1 in
Indenter: 35°

NDT Test Instruments PCE-DD-A Shore A

£ 88.00

Price excl. VAT &. delivery

The PCE-DD-A durometer is used to measure Shore A hardness in soft gums, rubber, elastomers and more. This compact pocket sized tester is ideal for checking / testing rubber hardness (tyre condition checker). Calibration is not available for this item.

Measurement area: 0 … 100 Shore A
Resolution: 0.5
Accuracy: ± 1
Depth of indentation: 0 … 2.5 mm / .1 in
Indenter: 35°

NDT Test Instruments PCE-DD-D Shore D

£ 88.00

Price excl. VAT &. delivery

PCE-DD-D is a Shore D durometer or hardness tester. This Shore D durometer uses an impact rod with a 30º conical point and 50 Newtons (N) of force to make a surface indentation on material samples with a minimum thickness of 6 mm or 0.24". Calibration is not available for this item.

For Shore D hardness testing of hard rubber, hard resin, acrylic, glass, thermoplastic and more
Measurement range: 0 … 100 Shore D
Accuracy: ± 2 Hardness - Grade

Noise Meter / Sound Meter PCE-325

£ 88.00

Price excl. VAT &. delivery

Our noise meter / sound meter records and visualizes sound levels in the range from 30 to 130 dB. The noise meter / sound meter has three manual measuring ranges and an automatic measuring range mode.

Measurement range 30 … 130 dB
Resolution 0.1 dB
Accuracy ±1.5 dB
Frequency 31.5 … 8,000 Hz

Class 2 microphone
Standard(s): IEC 61672-1 (Class II)

Noise Meter / Sound Meter PCE-325D

£ 88.00

Price excl. VAT &. delivery

Measuring range 30 … 130 dB
Resolution 0.1 dB
Accuracy ±1.5 dB
Frequency 31.5 … 8,000 Hz
Memory for 32000 values
incl. software for data export
Measurement report in .pdf and .csv
Standard(s): IEC 61672-1 (Class II)

Panel Indicator PCE-N50B

£ 88.00

Price excl. VAT &. delivery

The panel indicator has a RS485 Modbus interface. This digital Modbus panel indicator can display the measured data of up to 10 slave devices or registers.

Interface: RS 485 Modbus RTU Master
Number of slave devices / registers: 10
Baud rate individually adjustable
Further power supply area