Automotive Tester PCE-CT 80-FN3-ICA incl. ISO-Calibration Certificate
£ 919.00
Price excl. VAT &. delivery
ISO Calibration
The automotive tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the automotive tester, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 3000 µm, NFe: 0 … 3000 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"- incl. ISO-Calibration Certificate
Car Measuring Device PCE-CT 80-FN3-ICA incl. ISO-Calibration Certificate
£ 919.00
Price excl. VAT &. delivery
ISO Calibration
The car measuring device is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the car measuring device, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 3000 µm, NFe: 0 … 3000 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
  • incl. ISO-Calibration Certificate
Coating Thickness Gauge PCE-CT 80-FN3-ICA incl. ISO-Calibration Certificate
£ 919.00
Price excl. VAT &. delivery
ISO Calibration
The coating thickness gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the coating thickness gauge, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 3000 µm, NFe: 0 … 3000 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
  • incl. ISO-Calibration Certificate
Condition Monitoring Metal Hardness Tester PCE-900-ICA incl. ISO Calibration Certificate
£ 919.00
Price excl. VAT &. delivery
ISO Calibration

The Condition Monitoring Metal Hardness Tester measures the hardness of nine different metals using the Leeb rebound method. This means that with the Condition Monitoring Metal Hardness Tester a firing pin bounces on a metallic surface and the intensity of the rebound is used as an indicator of the material hardness. The Condition Monitoring Metal Hardness Tester measures the metal hardness in 6 different hardness scales. 

  • Measurement according to Leeb Rebound method
  • Testing of HRC, HRB, HV, HB, HSD
  • Measurement Range: 200-900 HLD / 13-99 HRB / 20-68 HRC / 20-655 HB / 80-940 HV / 32-99 HSD
  • Accuracy: 0.80% / Repeatability: 1.10%
  • Incl. type D Leeb probe
  • Optional Software Available
  • incl. ISO Calibration Certificate

 

Material Hardness Tester for Metal PCE-900-ICA incl. ISO Calibration Certificate
£ 919.00
Price excl. VAT &. delivery
ISO Calibration

The Leeb Material Hardness Tester for Metal PCE-900-ICA measures the hardness of nine different metals using the Leeb rebound method. This means that with the material hardness tester a firing pin bounces on a metallic surface and the intensity of the rebound is used as an indicator of the material hardness. The Material Hardness Tester for Metal measures the metal hardness in 6 different hardness scales. 

  • Measurement according to Leeb Rebound method
  • Testing of HRC, HRB, HV, HB, HSD
  • Measurement Range: 200-900 HLD / 13-99 HRB / 20-68 HRC / 20-655 HB / 80-940 HV / 32-99 HSD
  • Accuracy: 0.80% / Repeatability: 1.10%
  • Incl. type D Leeb probe
  • Optional Software Available
  • incl. ISO Calibration Certificate

Material Tester PCE-CT 80-FN3-ICA incl. ISO-Calibration Certificate
£ 919.00
Price excl. VAT &. delivery
ISO Calibration
The material tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material tester, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 3000 µm, NFe: 0 … 3000 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
  • incl. ISO-Calibration Certificate
Material Thickness Meter PCE-CT 80-FN3-ICA incl. ISO-Calibration Certificate
£ 919.00
Price excl. VAT &. delivery
ISO Calibration
The material thickness meter is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material thickness meter, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 3000 µm, NFe: 0 … 3000 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
  • incl. ISO-Calibration Certificate
Metal Hardness Tester PCE-900-ICA incl. ISO Calibration Certificate
£ 919.00
Price excl. VAT &. delivery
ISO Calibration

The Leeb Metal Hardness Tester PCE-900-ICA measures the hardness of nine different metals using the Leeb rebound method. This means that with the material hardness tester a firing pin bounces on a metallic surface and the intensity of the rebound is used as an indicator of the material hardness. The Metal Hardness Tester measures the metal hardness in 6 different hardness scales. 

  • Measurement according to Leeb Rebound method
  • Testing of HRC, HRB, HV, HB, HSD
  • Measurement Range: 200-900 HLD / 13-99 HRB / 20-68 HRC / 20-655 HB / 80-940 HV / 32-99 HSD
  • Accuracy: 0.80% / Repeatability: 1.10%
  • Incl. type D Leeb probe
  • Optional Software Available
  • incl. ISO Calibration Certificate

Metal Hardness Testing Durometer PCE-900-ICA incl. ISO Calibration Certificate
£ 919.00
Price excl. VAT &. delivery
ISO Calibration

The Metal Hardness Testing Durometer PCE-900-ICA measures the hardness of nine different metals using the Leeb rebound method. This means that with the material hardness tester a firing pin bounces on a metallic surface and the intensity of the rebound is used as an indicator of the material hardness. The Metal Hardness Testing Durometer measures the metal hardness in 6 different hardness scales. 

  • Measurement according to Leeb Rebound method
  • Testing of HRC, HRB, HV, HB, HSD
  • Measurement Range: 200-900 HLD / 13-99 HRB / 20-68 HRC / 20-655 HB / 80-940 HV / 32-99 HSD
  • Accuracy: 0.80% / Repeatability: 1.10%
  • Incl. type D Leeb probe
  • Optional Software Available
  • incl. ISO Calibration Certificate