Industrial Measurement Products and Solutions
Order no.: PCE-IVE 300

PCE-IVE 300 is an industrial endoscope or borescope inspection camera that comes with a rigid telescoping pole that extends up to 1 m (3.28') in length. Ideal for inspecting gutters, chimneys and structures as well as for inspecting parts and under vehicles, the endoscope camera captures both picture and video and saves the files to an SD card memory (included).

 

- Telescopic pole extends up to 1 m (3.28')
- Gooseneck camera head diameter of 28 mm (1.11")
- Waterproof and dustproof IP68 ingress protection rating

Manufacturer: PCE Instruments
£ 890.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DFG NF 2K
The force gage PCE-DFG NF 2K with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell has several threaded holes on the bottom that allow a firm installation.

- Measuring range: 0 ... 2 kN / 2,000 N / 450 lbs
- Resolution: 0.2 N / 0.04 lbs
- Accuracy: ± 0.5% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
Manufacturer: PCE Instruments
£ 890.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DFG NF 2K
The force gauge PCE-DFG NF 2K with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell has several threaded holes on the bottom that allow a firm installation.

- Measuring range: 0 ... 2 kN / 2,000 N / 450 lbs
- Resolution: 0.2 N / 0.04 lbs
- Accuracy: ± 0.5% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
Manufacturer: PCE Instruments
£ 890.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-IGM 60

The gloss meter PCE-IGM 60 is an optical measuring instrument with a measuring geometry of 60°. The surface is analyzed by the gloss meter and then the result is shown. Every surface has the characteristic to reflect light.


- Measurement geometry: 60° degree angle
- Measuring range: 0 ... 300 GU
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Light source: D65
- Wave length: 400-700 nm

 

Manufacturer: PCE Instruments
£ 890.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-SGM 60

The PCE-SGM 60 gloss meter with small measuring area is used on many types of surfaces to quantify their gloss units. This gloss-measuring device operates on the reflection principle by sending light from a calibrated light source onto the surface to be tested and then calculates the gloss level of the surface according to the reflection of light particles. This gloss meter allows you to measure very high gloss surfaces above 70 gloss units (GU).


- Measurement geometry: 60° degree angle
- Measurement up to 1000 gloss units
- Internal reading memory up to 5000 readings
- 3.5" TFT display
- Light source: D65
- Wave length: 400-700 nm

 

Manufacturer: PCE Instruments
£ 890.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-SGM 60
The PCE-SGM 60 gloss meter with small measuring area is used on many types of surfaces to quantify their gloss units. This gloss-measuring device operates on the reflection principle by sending light from a calibrated light source onto the surface to be tested and then calculates the gloss level of the surface according to the reflection of light particles. These gloss test instruments allow you to measure very high gloss surfaces above 70 gloss units (GU).


- Measurement geometry: 60° degree angle
- Measurement up to 1000 gloss units
- Internal reading memory up to 5000 readings
- 3.5" TFT display
- Light source: D65
- Wave length: 400-700 nm

Manufacturer: PCE Instruments
£ 890.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-IVE 300

PCE-IVE 300 is an industrial borescope inspection camera that comes with a rigid telescoping pole that extends up to 1 m (3.28 ft) in length. Ideal for inspecting gutters, chimneys and structures as well as for inspecting parts and under vehicles, the borescope camera captures both picture and video and saves the files to an SD card memory (included).

 

- Telescopic pole extends up to 1 m / 3.3 ft
- Gooseneck camera head diameter of 28 mm / 1.11 in
- Waterproof and dustproof IP68 ingress protection rating

Manufacturer: PCE Instruments
£ 890.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-IVE 300

PCE-IVE 300 is a borescope inspection camera that comes with a rigid telescoping pole that extends up to 1 m (3.28') in length. Ideal for inspecting gutters, chimneys and structures as well as for inspecting parts and under vehicles, the borescope camera captures both picture and video and saves the files to an SD card memory (included).

- Telescopic pole extends up to 1 m / 3.3 ft
- Gooseneck camera head diameter of 28 mm / 1.11 in
- Waterproof and dustproof IP68 ingress protection rating

Manufacturer: PCE Instruments
£ 890.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-IGM 60

The NDT tester or gloss meter PCE-IGM 60 is an optical measuring instrument with a measuring geometry of 60°. The surface is analyzed by the gloss meter and then the result is shown. Every surface has the characteristic to reflect light.


- Measurement geometry: 60° degree angle
- Measuring range: 0 ... 300 GU
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Light source: D65
- Wave length: 400-700 nm

 

Manufacturer: PCE Instruments
£ 890.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-IGM 60

The gloss meter PCE-IGM 60 is an optical measuring instrument with a measuring geometry of 60°. The surface is analyzed by the gloss meter and then the result is shown. Every surface has the characteristic to reflect light.


- Measurement geometry: 60° degree angle
- Measuring range: 0 ... 300 GU
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Light source: D65
- Wave length: 400-700 nm

 

Manufacturer: PCE Instruments
£ 890.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-SGM 60

The PCE-SGM 60 gloss meter with small measuring area is used on many types of surfaces to quantify their gloss units. This gloss-measuring device operates on the reflection principle by sending light from a calibrated light source onto the surface to be tested and then calculates the gloss level of the surface according to the reflection of light particles. This gloss meter allows you to measure very high gloss surfaces above 70 gloss units (GU).


- Measurement geometry: 60° degree angle
- Measurement up to 1000 gloss units
- Internal reading memory up to 5000 readings
- 3.5" TFT display
- Light source: D65
- Wave length: 400-700 nm

 

Manufacturer: PCE Instruments
£ 890.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-IGM 60

The gloss meter PCE-IGM 60 is an optical measuring instrument with a measuring geometry of 60°. The surface is analyzed by the gloss meter and then the result is shown. Every surface has the characteristic to reflect light.


- Measurement geometry: 60° degree angle
- Measuring range: 0 ... 1000 GU
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Light source: D65
- Wave length: 400-700 nm
 

 

Manufacturer: PCE Instruments
£ 890.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-SGM 60

The PCE-SGM 60 surface tester and gloss meter with small measuring area is used on many types of surfaces to quantify their gloss units. This gloss-measuring device operates on the reflection principle by sending light from a calibrated light source onto the surface to be tested and then calculates the gloss level of the surface according to the reflection of light particles. This meter allows you to measure very high gloss surfaces above 70 gloss units (GU).


- Measurement geometry: 60° degree angle
- Measurement up to 1000 gloss units
- Internal reading memory up to 5000 readings
- 3.5" TFT display
- Light source: D65
- Wave length: 400-700 nm

 

Manufacturer: PCE Instruments
£ 890.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-IVE 300

PCE-IVE 300 is a videoscope or video borescope inspection camera that comes with a rigid telescoping pole that extends up to 1 m (3.28') in length. Ideal for inspecting gutters, chimneys and structures as well as for inspecting parts and under vehicles, the borescope camera captures both picture and video and saves the files to an SD card memory (included).

 

- Telescopic pole extends up to 1 m / 3.3 ft
- Gooseneck camera head diameter of 28 mm / 1.11 in
- Waterproof and dustproof IP68 ingress protection rating

Manufacturer: PCE Instruments
£ 890.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: HFX205

This Air Quality Meter is designed to detect formaldehyde in air. The Air Quality Meter shows the formaldehyde-concentration on site and thereby avoids time-consuming and expensive analysis in laboratories. The formaldehyde Air Quality Meter runs with the help of an electromechanical sensor and is designed to determine the current permitted limit.


- Measuring range: 0 … 10 ppm
- Short reaction time
- Real-time display
- Manual and auto data storage
- High-speed USB
- Software for Online Data transfer

Manufacturer: HAL TECHNOLOGY, LLC
£ 886.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-PCO 2

PCE-PCO 2 is a portable handheld air quality particle counting meter or particle counter used to monitor particulate matter (PM) concentrations in the air. Designed to aid in indoor air quality (IAQ) assessments, this particle counter also measures air temperature, dew point and relative humidity.


- PM channels: PM 2.5, PM 10, including mass concentration mode (µg/m³)
- Particle sizes (in micrometers): 0.3 µm, 0.5 µm, 1.0 µm, 2.5 µm, 5.0 µm, 10 µm
- Temp. measuring range: 0 ... +50 °C / +32 ... +122 °F
- Humidity measuring range: 0 ... 100 % RH
- Built-in camera for image and video recording
- Free software download on PCE Software web page

Manufacturer: PCE Instruments
£ 886.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-PCO 2

PCE-PCO 2 is a portable handheld air sampler or particle counter used to monitor particulate matter (PM) concentrations in the air. Designed to aid in indoor air quality (IAQ) assessments, this particle counter also measures air temperature, dew point and relative humidity.


- PM channels: PM 2.5, PM 10, including mass concentration mode (µg/m³)
- Particle sizes (in micrometers): 0.3 µm, 0.5 µm, 1.0 µm, 2.5 µm, 5.0 µm, 10 µm
- Temp. measuring range: 0 ... +50 °C / +32 ... +122 °F
- Humidity measuring range: 0 ... 100 % RH
- Built-in camera for image and video recording
- Free software download on PCE Software web page

Manufacturer: PCE Instruments
£ 886.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-PCO 2

PCE-PCO 2 is a portable handheld airborne particle-counting hygiene meter or particle counter used to monitor particulate matter (PM) concentrations in the air. Designed to aid in indoor air quality (IAQ) assessments, this particle counter also measures air temperature, dew point and relative humidity.


- PM channels: PM 2.5, PM 10, including mass concentration mode (µg/m³)
- Particle sizes (in micrometers): 0.3 µm, 0.5 µm, 1.0 µm, 2.5 µm, 5.0 µm, 10 µm
- Temp. measuring range: 0 ... +50 °C / +32 ... +122 °F
- Humidity measuring range: 0 ... 100 % RH
- Built-in camera for image and video recording
- Free software download on PCE Software web page

Manufacturer: PCE Instruments
£ 886.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-PCO 2

PCE-PCO 2 is a portable handheld data logger used to monitor particulate matter (PM) concentrations in the air. Designed to aid in indoor air quality (IAQ) assessments, this data logger also measures air temperature, dew point and relative humidity.


- PM channels: PM 2.5, PM 10, including mass concentration mode (µg/m³)
- Particle sizes (in micrometers): 0.3 µm, 0.5 µm, 1.0 µm, 2.5 µm, 5.0 µm, 10 µm
- Temp. measuring range: 0 ... +50 °C / +32 ... +122 °F
- Humidity measuring range: 0 ... 100 % RH
- Built-in camera for image and video recording
- Free software download on PCE Software web page

Manufacturer: PCE Instruments
£ 886.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DPM 3-ICA
The dew point data logger is a mobile testing device for monitoring the quality of compressed air on stationary and mobile compressed air generators. This dew point data logger measures the temperature, the relative humidity, H2O and calculates the current dew point up to an ambient pressure of 20 bar.

- Dew point, H2O, temperature, humidity measurement
- Data memory for approx. 50,000 measurement data
- CSV data export
- With G1 / 2" connection thread
- For inline measurement of pressure pipes
- Sensor protected with a cap
- Left connection has NO function
- incl. ISO Calibration Certificate for humidity and temperature
Manufacturer: PCE Instruments
£ 886.00

Price excl. VAT &. delivery
2 year Warranty