Industrial Measurement Products and Solutions
Order no.: PCE-DDM 3

The PCE-DDM 3 Crane Scale is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 3 Crane Scale is delivered in a protective carrying case and includes two shackles made of heavy-duty aluminum. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.


- Measurement range: 3,000 kg / 30 kN / 6,614 lbs
- Resolution: 1 kg / 10 N
- Units of measurement: kg / t / lbs / N / kN
- Comes with remote control indicator

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DFG NF 0.5K
The dynamometer PCE-DFG NF 0.5K with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell has several threaded holes on the bottom that allow a firm installation.


- Measuring range: 0 ... 0.5 kN / 500 N / 112 lbs
- Resolution: 0.05 N / 0.01 lbs
- Accuracy: ± 0.5% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DFG NF 1K
The dynamometer PCE-DFG NF 1K with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell has several threaded holes on the bottom that allow a firm installation.


- Measuring range: 0 ... 1 kN / 1,000 N / 225 lbs
- Resolution: 0.1 N / 0.02 lbs
- Accuracy: ±0.5 % of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DFG NF 5K
The dynamometer PCE-DFG NF 5K with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell has several threaded holes on the bottom that allow a firm installation.


- Measuring range: 0 ... 5 kN / 5,000 N / 1,124 lbs
- Resolution: 0.5 N / 0.1 lbs
- Accuracy: ± 0.5% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DDM 3

The PCE-DDM 3 Force Gauge is the ideal tool for measuring strong tensile forces. The PCE-DDM 3 Force Gauge is delivered in a protective carrying case and includes two shackles made of heavy-duty aluminum. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.


- Measurement range: 3,000 kg / 30 kN / 6,614 lbs
- Resolution: 1 kg / 10 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied with remote control indicator

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DFG NF 0.5K
The force gauge PCE-DFG NF 0.5K with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell has several threaded holes on the bottom that allow a firm installation.


- Measuring range: 0 ... 0.5 kN / 500 N / 112 lbs
- Resolution: 0.05 N / 0.01 lbs
- Accuracy: ± 0.5% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DFG NF 1K

The force gauge PCE-DFG NF 1K with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell has several threaded holes on the bottom that allow a firm installation. 


- Measuring range: 0 ... 1 kN / 1,000 N / 225 lbs
- Resolution: 0.1 N / 0.02 lbs
- Accuracy: ±0.5 % of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DFG NF 5K
The force gauge PCE-DFG NF 5K with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell has several threaded holes on the bottom that allow a firm installation.


- Measuring range: 0 ... 5 kN / 5,000 N / 1,124 lbs
- Resolution: 0.5 N / 0.1 lbs
- Accuracy: ± 0.5% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: TETRA-MINI

TETRA-MINI alerts the user acoustically, visually and vibrationally to the presence of flammable gases (CH4), oxygen (O2), hydrogen sulfide (H2S) and carbon monoxide (CO). Furthermore, this unpumped four-gas meter displays the current measured value on its graphic LCD screen with backlight. Other gas sensors are available for this instrument. Call for details.


- Sensor types: CH4 / H2S / CO / O2
- Easy one-button operation
- Rechargeable Li-ion battery
- ATEX II 2G EEx iad IIC T4 approved

 

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: TETRA-MINI

TETRA-MINI alerts the user acoustically, visually and vibrationally to the presence of flammable gases (CH4), oxygen (O2), hydrogen sulfide (H2S) and carbon monoxide (CO). Furthermore, this unpumped four-gas meter displays the current measured value on its graphic LCD screen with backlight. Other gas sensors are available for this instrument. Call for details.


- Sensor types: CH4 / H2S / CO / O2
- Easy one-button operation
- Rechargeable Li-ion battery
- ATEX II 2G EEx iad IIC T4 approved

 

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: PCE-DDM 3

The PCE-DDM 3 Hanging Scales are the ideal tool for weighing big loads and for measuring strong tensile forces. The hanging scales are delivered in a protective carrying case and includes two shackles made of heavy-duty aluminum. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.


- Measurement range: 3,000 kg / 30 kN / 6,614 lbs
- Resolution: 1 kg / 10 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied with remote control indicator

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DDM 3

The Tension Dynamometer PCE-DDM 3 is the ideal tool for measuring strong tensile forces. The Tension Dynamometer PCE-DDM 3 is delivered in a protective carrying case and includes two shackles made of heavy-duty aluminum. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.


- Measurement range: 3,000 kg / 30 kN / 6,614 lbs
- Resolution: 1 kg / 10 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied with remote control indicator

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: TXgard-IS+O2

The TXgard-IS+O2 is a single-gas Gas Leak Detector used to warn for gases (Oxygen, O2, 0 ... 25 vol%), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).


- Stationary
- For (Oxygen, O2, 0 ... 25 vol%)
- Additional display and alarm station
- ATEX or UL approval

 

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: PCE-TUM 50
The turbidity meter PCE-TUM 50 is a portable device for measuring turbidity according to ISO 7027. This allows the user to quickly and easily determine important water parameters with the turbidity meter and to check the quality of drinking water and waste water.

- Measurement method: ISO 7027 (90°)
- Measuring ranges: 0 ... 2000 NTU
                                   0 ... 500 EBC
                                   0 ... 9999 ASBC
- 3 measuring units
Turbidity calibration up to 7 points
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-TUM 50
The water analysis meter PCE-TUM 50 is a portable device for measuring turbidity according to ISO 7027. This allows the user to quickly and easily determine important water parameters with the water analysis meter and to check the quality of drinking water and waste water.

- Measurement method: ISO 7027 (90°)
- Measuring ranges: 0 ... 2000 NTU
                                   0 ... 500 EBC
                                   0 ... 9999 ASBC
- 3 measuring units
Turbidity calibration up to 7 points
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SGM 60-ICA

The PCE-SGM 60 gloss meter with small measuring area is used on many types of surfaces to quantify their gloss units. This gloss-measuring device operates on the reflection principle by sending light from a calibrated light source onto the surface to be tested and then calculates the gloss level of the surface according to the reflection of light particles. This gloss meter allows you to measure very high gloss surfaces above 70 gloss units (GU).


- Measurement geometry: 60° degree angle
- Measurement up to 1000 gloss units
- Internal reading memory up to 5000 readings
- 3.5" TFT display
- Light source: D65
- Wave length: 400-700 nm
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SGM 60-ICA
The PCE-SGM 60 gloss meter with small measuring area is used on many types of surfaces to quantify their gloss units. This gloss-measuring device operates on the reflection principle by sending light from a calibrated light source onto the surface to be tested and then calculates the gloss level of the surface according to the reflection of light particles. These gloss test instruments allow you to measure very high gloss surfaces above 70 gloss units (GU).


- Measurement geometry: 60° degree angle
- Measurement up to 1000 gloss units
- Internal reading memory up to 5000 readings
- 3.5" TFT display
- Light source: D65
- Wave length: 400-700 nm
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SGM 60-ICA

The PCE-SGM 60 surface tester and gloss meter with small measuring area is used on many types of surfaces to quantify their gloss units. This gloss-measuring device operates on the reflection principle by sending light from a calibrated light source onto the surface to be tested and then calculates the gloss level of the surface according to the reflection of light particles. This meter allows you to measure very high gloss surfaces above 70 gloss units (GU).


- Measurement geometry: 60° degree angle
- Measurement up to 1000 gloss units
- Internal reading memory up to 5000 readings
- 3.5" TFT display
- Light source: D65
- Wave length: 400-700 nm
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: TXgard-IS+O2

The TXgard-IS+O2 is a single-gas Gassensor used to warn for gases (Oxygen, O2, 0 ... 25 vol%), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).


- Stationary
- For (Oxygen, O2, 0 ... 25 vol%)
- Additional display and alarm station
- ATEX or UL approval

 

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: TXgard-IS+O2

The TXgard-IS+O2 is a single-gas Gassensor used to warn for gases (Oxygen, O2, 0 ... 25 vol%), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).


- Stationary
- For (Oxygen, O2, 0 ... 25 vol%)
- Additional display and alarm station
- ATEX or UL approval

 

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer