The gloss meter is used for measuring on flat surfaces and operates on the principle of a reflectometer. The compact design and the handy size of the gloss meter makes it useful for on-site measurements or during operation of production plant. All test instruments are delivered manufacturer calibrated and can be certified to ISO as an option.
- Measurement angles 20º, 60º and 85º degree angles
- Measurement range: 0.0 to 200 gloss units
- Standards: ISO 2813, GB 9754-88, GB 9966.5
- Incl. ISO calibration certificate
The gloss meter PCE-IGM 60 is an optical measuring instrument with a measuring geometry of 60 °. The surface is analyzed by the gloss meter and then the result is shown. Every surface has the characteristic to reflect light.
- Measurement geometry: 60° degree angle
- Measuring range: 0 ... 300 GU
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Light source: D65
- Wave length: 400-700 nm
- Incl. ISO calibration certificate
The gloss surface tester is used for measuring on flat surfaces and operates on the principle of a reflectometer. The compact design and the handy size of the gloss surface tester makes it useful for on-site measurements or during operation of production plant.
- Measurement angles 20º, 60º and 85º degree angles
- Measurement range: 0.0 to 200 gloss units
- Standards: ISO 2813, GB 9754-88, GB 9966.5
- Incl. ISO calibration certificate
The gloss meter PCE-IGM 60 is an optical measuring instrument with a measuring geometry of 60 °. The surface is analyzed by the gloss meter and then the result is shown. Every surface has the characteristic to reflect light.
- Measurement geometry: 60° degree angle
- Measuring range: 0 ... 1000 GU
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Light source: D65
- Wave length: 400-700 nm
- Incl. ISO calibration certificate
The UV light meter with USB is a small UV control system, compact and of high quality for prolonged recording. The UV radiation detector has been developed to record the UV intensity in mW/cm2 of low pressure transmitters for water sterilisation or other sources of UV radiation. These data logging instruments are manufacturer calibrated can be equipped with an additional ISO calibration certificate.
- UV USB light meter, type: 1 Diazo 350 to 460 nm
- Memory capacity of 32 K
- USB port
- Software for the analysis of values on PC or laptop included
- Adjustable measurement rate
- Replaceable battery
- Wireless data recording
The absolute moisture meter PCE-MA 100 allows different materials to be weighed and their moisture contents determined. The heating chamber is heated by halogen lamps up to 199 °C. In this chamber, the absolute moisture meter dries the material to be weighed, and then calculates the moisture content from the weight difference.
- Testing or weighing capacity: 110 g / 3.88 oz
- Readability: 1 mg / 0.001 g / 0.01 %
- Adjustable drying temperature and time
The analytical balance PCE-MA 100 allows different materials to be weighed and their moisture contents determined. The heating chamber is heated by halogen lamps up to 199 °C. In this chamber, the analytical balance dries the material to be weighed, and then calculates the moisture content from the weight difference.
- Testing or weighing capacity: 110 g / 3.88 oz
- Readability: 1 mg / 0.001 g / 0.01 %
- Adjustable drying temperature and time
The benchtop scale PCE-MA 100 allows different materials to be weighed and their moisture contents determined. The heating chamber is heated by halogen lamps up to 199 °C. In this chamber, the benchtop scale dries the material to be weighed, and then calculates the moisture content from the weight difference.
- Testing or weighing capacity: 110 g / 3.88 oz
- Readability: 1 mg / 0.001 g / 0.01 %
- Adjustable drying temperature and time
The PCE-DDM 10WI Crane Scale is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 10WI Crane Scale is delivered in a protective carrying case and includes two shackles made of heavy-duty aluminum. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.
- Measurement range: 10,000 kg / 100 kN / 22,046 lbs
- Resolution: 5 kg / 50 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied without remote control indicator
The PCE-DDM 10WI Force Gauge is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 10WI Force Gauge is delivered in a protective carrying case and includes two shackles made of heavy-duty aluminum. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.
- Measurement range: 10,000 kg / 100 kN / 22,046 lbs
- Resolution: 5 kg / 50 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied without remote control indicator
The PCE-DDM 10WI Hanging Scale is the ideal tool for weighing big loads and for measuring strong tensile forces. The hanging scales are delivered in a protective carrying case and includes two shackles made of heavy-duty aluminum. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.
- Measurement range: 10,000 kg / 100 kN / 22,046 lbs
- Resolution: 5 kg / 50 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied without remote control indicator
The LAB Scale PCE-MA 100 allows different materials to be weighed and their moisture contents determined. The heating chamber is heated by halogen lamps up to 199 °C. In this chamber, the laboratory balance dries the material to be weighed, and then calculates the moisture content from the weight difference.
- Testing or weighing capacity: 110 g / 3.88 oz
- Readability: 1 mg / 0.001 g / 0.01 %
- Adjustable drying temperature and time
The laboratory balance PCE-MA 100 allows different materials to be weighed and their moisture contents determined. The heating chamber is heated by halogen lamps up to 199 °C. In this chamber, the laboratory balance dries the material to be weighed, and then calculates the moisture content from the weight difference.
- Testing or weighing capacity: 110 g / 3.88 oz
- Readability: 1 mg / 0.001 g / 0.01 %
- Adjustable drying temperature and time
PCE-950-ICA is a handheld material hardness tester used to determine the hardness of 10 different types of metal (i.e., cast steel, hammered steel, cold-rolled steel, stainless steel, cast iron, ductile iron, aluminum alloy, brass, bronze and forged copper alloy) according to the Leeb rebound method. In addition to Leeb hardness units, the metal hardness tester displays hardness measurements in Rockwell C, Rockwell B, Rockwell A, Brinell, Vickers and Shore hardness units.
- Measurement ranges: 19.8 ... 68.5 HRC, 13.5 ... 101.7 HRB, 59.1 ... 85.8 HRA,
19 ... 655 HB, 80 ... 976 HV, 32.2 ... 115 HS
- Hardness units: HL, HRC, HRB, HRA, HB, HV, HS
- Accuracy: ±6 HL at HL = 790
- Impact device: Type D (integrated)
- Maximum hardness: 976 HV
- For use with hammered steel, cold-rolled steel, stainless steel, cast iron, ductile iron, aluminum alloy, brass, bronze and forged copper alloy metals
-
Includes ISO calibration certificate
PCE-950-ICA is a handheld metal hardness durometer used to determine the hardness of 10 different types of metal (i.e., cast steel, hammered steel, cold-rolled steel, stainless steel, cast iron, ductile iron, aluminum alloy, brass, bronze and forged copper alloy) according to the Leeb rebound method. In addition to Leeb hardness units, the metal hardness tester displays hardness measurements in Rockwell C, Rockwell B, Rockwell A, Brinell, Vickers and Shore hardness units.
- Measurement ranges: 19.8 ... 68.5 HRC, 13.5 ... 101.7 HRB, 59.1 ... 85.8 HRA,
19 ... 655 HB, 80 ... 976 HV, 32.2 ... 115 HS
- Hardness units: HL, HRC, HRB, HRA, HB, HV, HS
- Accuracy: ±6 HL at HL = 790
- Impact device: Type D (integrated)
- Maximum hardness: 976 HV
- For use with hammered steel, cold-rolled steel, stainless steel, cast iron, ductile iron, aluminum alloy, brass, bronze and forged copper alloy metals
-
Includes ISO calibration certificate
PCE-950-ICA is a handheld metal hardness tester used to determine the hardness of 10 different types of metal (i.e., cast steel, hammered steel, cold-rolled steel, stainless steel, cast iron, ductile iron, aluminum alloy, brass, bronze and forged copper alloy) according to the Leeb rebound method. In addition to Leeb hardness units, the metal hardness tester displays hardness measurements in Rockwell C, Rockwell B, Rockwell A, Brinell, Vickers and Shore hardness units.
- Measurement ranges: 19.8 ... 68.5 HRC, 13.5 ... 101.7 HRB, 59.1 ... 85.8 HRA,
19 ... 655 HB, 80 ... 976 HV, 32.2 ... 115 HS
- Hardness units: HL, HRC, HRB, HRA, HB, HV, HS
- Accuracy: ±6 HL at HL = 790
- Impact device: Type D (integrated)
- Maximum hardness: 976 HV
- For use with hammered steel, cold-rolled steel, stainless steel, cast iron, ductile iron, aluminum alloy, brass, bronze and forged copper alloy metals
-
Includes ISO calibration certificate
PCE-MA 100 is an oven-drying moisture analyzer or moisture balance for weighing and heating material samples to determine moisture content. The heating chamber is heated by halogen lamps up to 199 °C. In this chamber, the moisture analyzer or moisture balance dries the sample to be weighed, and then calculates the moisture content from the weight difference.
- Testing or weighing sample capacity: 110 g / 3.88 oz
- Moisture content measurement range: 0 ... 100 %
- Readout, readability or resolution: 1 mg / 0.001 g / 0.01 %
- Adjustable drying temperature and time
- Memory for up to 15 drying programs
The moisture meter PCE-MA 100 allows different materials to be weighed and their moisture contents determined. The heating chamber is heated by a halogen lamp up to 199 °C. In this chamber, the moisture meter dries the material to be weighed, and then calculates the moisture content from the weight difference.
- Testing or weighing capacity: 110 g / 3.88 oz
- Readability: 1 mg / 0.001 g / 0.01 %
- Adjustable drying temperature and time
