The Air Humidity Meter PCE-P18S measures air humidity and air temperature. The Air Humidity Meter calculates the dew point and the absolute humidity from these two values. The measurement data from the Air Humidity Meter are output via the Modbus RTU interface.

Analogue Thermometer for indoor use (barometer, thermometer, hygrometer), made from carved out and painted slate. The analogue Thermometer Domatic Slate comes with a modern design and three well-readable round displays.

- Measuring range: -30 ... +50 °C, 20 ... 100 %, 980 ... 1040 hPa
- Resolution: 1 °C, 1 %, 1 hPa
- For indoor use
- Analogue display
- Low on maintenance

The PCE-N24S frequency indicator is used for the signal processing of 4 .. 20 mA. The PCE-N24S frequency indicator has a 5-digit LED display to allow the user to read the directly measured current values.

- Power supply: 230 V, 110 V, 24 V, 20 ... 40 V AC/DC, 85 ... 253 V AC/DC (selectable)
- Input signal: 0/4 ... 20 mA, 0 ... 60 mV, ±60 mV DC, 0 ... 10 V, ± 10 V DC (selectable)
- Display: 4 digits, red
- Digit height: 20 mm

The Humidity Detector PCE-P18S measures air humidity and air temperature. The Humidity Detector calculates the dew point and the absolute humidity from these two values. The measurement data from the Humidity Detector are output via the Modbus RTU interface.

The Hygrometer PCE-P18S measures air humidity and air temperature. The Hygrometer calculates the dew point and the absolute humidity from these two values. The measurement data from the Hygrometer are output via the Modbus RTU interface.

The digital panel indicator PCE-N24H is designed to measure and display direct current and DC voltages. The option of arbitrary scaling of the input signal allows multiple applications of the digital panel meter PCE-N24H. Due to a large 4-digit LED the measured values are always clearly readable on the digital panel meter PCE-N24H.

- IP 65 in the front
- 100 V, 250 V, 400 V, 5 A DC (arbitrary)
- Configuration via software  

The PCE-N24S panel indicator is used for the signal processing of 4 .. 20 mA. The PCE-N24S panel indicator has a 5-digit LED display to allow the user to read the directly measured current values.

- Power supply: 230 V, 110 V, 24 V, 20 ... 40 V AC/DC, 85 ... 253 V AC/DC (selectable)
- Input signal: 0/4 ... 20 mA, 0 ... 60 mV, ±60 mV DC, 0 ... 10 V, ± 10 V DC (selectable)
- Display: 4 digits, red
- Digit height: 20 mm

The PCE-N24S power indicator is used for the signal processing of 4 .. 20 mA. The PCE-N24S power indicator has a 5-digit LED display to allow the user to read the directly measured current values.

- Power supply: 230 V, 110 V, 24 V, 20 ... 40 V AC/DC, 85 ... 253 V AC/DC (selectable)
- Input signal: 0/4 ... 20 mA, 0 ... 60 mV, ±60 mV DC, 0 ... 10 V, ± 10 V DC (selectable)
- Display: 4 digits, red
- Digit height: 20 mm

The PCE-N24S pressure indicator is used for the signal processing of 4 .. 20 mA. The PCE-N24S pressure indicator has a 5-digit LED display to allow the user to read the directly measured current values.

- Power supply: 230 V, 110 V, 24 V, 20 ... 40 V AC/DC, 85 ... 253 V AC/DC (selectable)
- Input signal: 0/4 ... 20 mA, 0 ... 60 mV, ±60 mV DC, 0 ... 10 V, ± 10 V DC (selectable)
- Display: 4 digits, red
- Digit height: 20 mm

The PCE-N24S process indicator is used for the signal processing of 4 .. 20 mA. The PCE-N24S process indicator has a 5-digit LED display to allow the user to read the directly measured current values.

- Power supply: 230 V, 110 V, 24 V, 20 ... 40 V AC/DC, 85 ... 253 V AC/DC (selectable)
- Input signal: 0/4 ... 20 mA, 0 ... 60 mV, ±60 mV DC, 0 ... 10 V, ± 10 V DC (selectable)
- Display: 4 digits, red
- Digit height: 20 mm

The Relative Humidity Meter PCE-P18S measures air humidity and air temperature. The Relative Humidity Meter calculates the dew point and the absolute humidity from these two values. The measurement data from the Humidity Detector are output via the Modbus RTU interface.

Analogue Temperatur Meter for indoor use (barometer, thermometer, hygrometer), made from carved out and painted slate. The analogue Temperatur Meter Domatic Slate comes with a modern design and three well-readable round displays.

- Measuring range: -30 ... +50 °C, 20 ... 100 %, 980 ... 1040 hPa
- Resolution: 1 °C, 1 %, 1 hPa
- For indoor use
- Analogue display
- Low on maintenance

The temperature indicator PCE-N24S is used for the signal processing of  4...20 mA. The PCE-N24S digital indicator offers a wide field of application due to the fact that its signal can be freely scaled. The PCE-N24S digital indicator has a 5-digit LED display to allow the user to directly read current measured values.

- Power supply: 230 V, 110 V, 24 V, 20 ... 40 V AC/DC, 85 ... 253 V AC/DC (selectable)
- Input signal: 0/4 ... 20 mA, 0 ... 60 mV, ±60 mV DC, 0 ... 10 V, ± 10 V DC (selectable)
- Display: 4 digits, red
- Digit height: 20 mm

The Temperature Meter PCE-P18S measures air humidity and air temperature. The Temperature Meter calculates the dew point and the absolute humidity from these two values. The measurement data from the Temperature Meter are output via the Modbus RTU interface.

The Temperature Sensor PCE-P18S measures air humidity and air temperature. The Temperature Sensor calculates the dew point and the absolute humidity from these two values. The measurement data from the Temperature Sensor are output via the Modbus RTU interface.

The Thermo Hygrometer PCE-P18S measures air humidity and air temperature. The Thermo Hygrometer calculates the dew point and the absolute humidity from these two values. The measurement data from the Thermo Hygrometer are output via the Modbus RTU interface.

The voltage indicator PCE-N24H is designed to measure and display direct current and DC voltages. The option of arbitrary scaling of the input signal allows multiple applications of the digital panel meter PCE-N24H. Due to a large 4-digit LED the measured values are always clearly readable on the voltage indicator PCE-N24H.

- IP 65 in the front
- 100 V, 250 V, 400 V, 5 A DC (arbitrary)
- Configuration via software  

The PCE-N24S voltage indicator is used for the signal processing of 4 .. 20 mA. The PCE-N24S voltage indicator has a 5-digit LED display to allow the user to read the directly measured current values.

- Power supply: 230 V, 110 V, 24 V, 20 ... 40 V AC/DC, 85 ... 253 V AC/DC (selectable)
- Input signal: 0/4 ... 20 mA, 0 ... 60 mV, ±60 mV DC, 0 ... 10 V, ± 10 V DC (selectable)
- Display: 4 digits, red
- Digit height: 20 mm

The PCE-S 41 Mechanics Stethoscope is battery powered and easy to use. This Mechanics Stethoscope can be used for detecting noise in machine components, such as gears, valves, vents, and pumps.

- Frequency range: 100 Hz to 10 kHz
- Headphones, 70 mm long sensor, 290 mm long sensor, battery, carrying case
- Weight: 240 g, with battery
- Dimensions: 206 mm x 50 mm x 32 mm

The USB Benchtop Scale PCE-PB 150N is a versatile platform scale. The functions of the USB benchtop scale are very extensive, but one function is particularly interesting for shipping. It is the bidirectional USB interface of the benchtop scale that enables control by the PC.

- Weighing range: 150 kg / 330 lb
- Readability: 50 g
- Calibratable
- Bidirectional USB interface
- Piece counting function with reference number of pieces
- Multiple tare
- Stainless steel platform