The pressure meter PCE-DMM 70 is a precision instrument for leakage testing. The pressure meter is specifically designed for leak testing of pipe networks. The actual pressure sensor and the display of this precision instrument can be separated without tools. The measurement values are stored in the internal memory.

- Max. 400 bar / 5801 psi
- For leakage testing
- Media: water, gases
- Pressure type: Absolute / Relative
- Membrane: Stainless Steel
- Accuracy class: 0.05

The pressure sensor PCE-DMM 60 is a precision instrument of the highest standards. The pressure sensor is specifically designed for process monitoring and calibration. This pressure sensor is distinguished by its modular concept. This means that the actual sensor and the display can be separated. The pressure transmitter can be selected on site for different measuring ranges and connected to the display without tools.

- Max. 400 bar / 5801 psi
- Media: water, gases
- Pressure type: Absolute / Relative
- Diaphragm: stainless steel
- Accuracy: 0.05 

The pressure sensor PCE-DMM 70 is a precision instrument for leakage testing. The pressure sensor is specifically designed for leak testing of pipe networks. The actual pressure sensor and the display of this precision instrument can be separated without tools. The measurement values are stored in the internal memory.

- Max. 400 bar / 5801 psi
- For leakage testing
- Media: water, gases
- Pressure type: Absolute / Relative
- Membrane: Stainless Steel
- Accuracy class: 0.05

The Electromagnetic Field Meter is used in the laboratory and quality assurance to measure the strength of magnetic fields. The Electromagnetic Field Meter is delivered with two different sensors. A magnetic field sensor is available for general measurements in the Gauss and milli-Tesla range, as well as a precision sensor for measurements in the milli-Gauss and micro-Tesla range.

- Tabletop device with 2 sensors

            General Probe Range: 0-3000 milli-Tesla (0-30,000 Gauss)

            Precision Probe Range: 0-300 micro-Tesla (0-3000 milli-Gauss)

- For static and changing magnetic fields

- Highly accurate Transverse Hall sensor

- Different units selectable  (mG / µT)

- Data storage on SD memory card

The Electromagnetic Radiation Detector is used in the laboratory and quality assurance to measure the strength of magnetic fields. The Electromagnetic Radiation Detector is delivered with two different sensors. A magnetic field sensor is available for general measurements in the Gauss and milli-Tesla range, as well as a precision sensor for measurements in the milli-Gauss and micro-Tesla range.

- Tabletop device with 2 sensors

            General Probe Range: 0-3000 milli-Tesla (0-30,000 Gauss)

            Precision Probe Range: 0-300 micro-Tesla (0-3000 milli-Gauss)

- For static and changing magnetic fields

- Highly accurate Transverse Hall sensor

- Different units selectable  (mG / µT)

- Data storage on SD memory card

The gauss meter PCE-MFM 4000 is used in the laboratory and quality assurance to measure the strength of magnetic fields. The gauss meter is delivered with two different sensors. A magnetic field sensor is available for general measurements in the Gauss and milli-Tesla range, as well as a precision sensor for measurements in the milli-Gauss and micro-Tesla range.

- Tabletop device with 2 sensors

            General Probe Range: 0-3000 milli-Tesla (0-30,000 Gauss)

            Precision Probe Range: 0-300 micro-Tesla (0-3000 milli-Gauss)

- For static and changing magnetic fields

- Highly accurate Transverse Hall sensor

- Different units selectable  (mG / µT)

- Data storage on SD memory card

The magnetometer PCE-MFM 4000 is used in the laboratory and quality assurance to measure the strength of magnetic fields. The magnetometer is delivered with two different sensors. A magnetic field sensor is available for general measurements in the Gauss and milli-Tesla range, as well as a precision sensor for measurements in the milli-Gauss and micro-Tesla range.

- Tabletop device with 2 sensors

            General Probe Range: 0-3000 milli-Tesla (0-30,000 Gauss)

            Precision Probe Range: 0-300 micro-Tesla (0-3000 milli-Gauss)

- For static and changing magnetic fields

- Highly accurate Transverse Hall sensor

- Different units selectable  (mG / µT)

- Data storage on SD memory card

The Air Quality Meter Gasman-PH3 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Air Quality Meter warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Air Quality Meter fulfills all the European and international norms, even ATEX and UL standards.

 
- Non-rechargeable, 1-year battery
- For PH₃ (Phosphine)
- Dust and water resistant - IP 65/67
- 0 ... 5 ppm

PCE-T 1200 is a 12-channel temperature data logger that accommodates SD cards up to 16 GB in size. The optional software allows the temperature meter to connect to a PC via USB for direct data transfer and analysis via Microsoft Excel.

- 12-channel data logger for temperature (°C / °F)
- Works with type K, J, T, E, R and S thermocouple sensors
- Adjustable datalogging interval from 1 ... 3600 seconds per channel
- Includes 2 Type K sensors 1-meter in length

The Gas Detector Gasman-PH3 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Gas Detector warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Gas Detector fulfills all the European and international norms, even ATEX and UL standards.

- Non-rechargeable, 1-year battery
- For PH₃ (Phosphine)
- Dust and water resistant - IP 65/67
- 0 ... 5 ppm

The Gas Leak Detector Gasman-PH3 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Gas Leak Detector warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Gas Leak Detector fulfills all the European and international norms, even ATEX and UL standards.

- Non-rechargeable, 1-year battery
- For PH₃ (Phosphine)
- Dust and water resistant - IP 65/67
- 0 ... 5 ppm

PCE-T 1200 is a 12-channel temperature data logger that accommodates SD cards up to 16 GB in size. The optional software allows the temperature meter to connect to a PC via USB for direct data transfer and analysis via Microsoft Excel.

- 12-channel data logger for temperature (°C / °F)
- Works with type K, J, T, E, R and S thermocouple sensors
- Adjustable datalogging interval from 1 ... 3600 seconds per channel
- Includes 2 Type K sensors 1-meter in length

PCE-T 1200 is a 12-channel temperature data logger that accommodates SD cards up to 16 GB in size. The optional software allows the temperature meter to connect to a PC via USB for direct data transfer and analysis via Microsoft Excel. 

- 12-channel data logger for temperature (°C / °F)
- Works with type K, J, T, E, R and S thermocouple sensors
- Adjustable datalogging interval from 1 ... 3600 seconds per channel
- Includes 2 Type K sensors 1-meter in length

PCE-T 1200 is a 12-channel temperature data logger that accommodates SD cards up to 16 GB in size. The optional software allows the temperature meter to connect to a PC via USB for direct data transfer and analysis via Microsoft Excel.

- 12-channel data logger for temperature (°C / °F)
- Works with type K, J, T, E, R and S thermocouple sensors
- Adjustable data-logging interval from 1 ... 3600 seconds per channel
- Includes 2 Type K sensors 1-meter in length

PCE-T 1200 is a 12-channel temperature data logger that accommodates SD cards up to 16 GB in size. The optional software allows the temperature meter to connect to a PC via USB for direct data transfer and analysis via Microsoft Excel.

- 12-channel data logger for temperature (°C / °F)
- Works with type K, J, T, E, R and S thermocouple sensors
- Adjustable datalogging interval from 1 ... 3600 seconds per channel
- Includes 2 Type K sensors 1-meter in length

PCE-T 1200 is a 12-channel temperature data logger that accommodates SD cards up to 16 GB in size. The optional software allows the temperature meter to connect to a PC via USB for direct data transfer and analysis via Microsoft Excel.

- 12-channel data logger for temperature (°C / °F)
- Works with type K, J, T, E, R and S thermocouple sensors
- Adjustable datalogging interval from 1 ... 3600 seconds per channel
- Includes 2 Type K sensors 1-meter in length

PCE-DDM 5WI is a rugged crane scale designed to weigh large hanging loads. PCE-DDM 5WI is also a durable digital dynamometer specially crafted to measure strong tensile forces. This high-capacity device is delivered in a protective carrying case and includes two shackles made of heavy-duty aluminum.

- Max. capacity: 5 t / 11,023 lbs / 5,000 kg / 50 kN
- Resolution: 4 lbs / 2 kg / 20 N
- Units of measurement: kg / t / lbs / N / kN
- Does not include remote control

The PCE-DDM 5WI Force Gauge is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 5WI Force Gauge is delivered in a protective carrying case and includes two shackles made of heavy-duty aluminum. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.

- Measurement range: 5,000 kg / 50 kN / 11,023 lbs
- Resolution: 2 kg / 20 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied without remote control indicator

The PCE-DDM 5WI Hanging Scales are the ideal tool for weighing big loads and for measuring strong tensile forces. The hanging scales are delivered in a protective carrying case and includes two shackles made of heavy-duty aluminum. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.

- Measurement range: 5,000 kg / 50 kN / 11,023 lbs
- Resolution: 2 kg / 20 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied without remote control indicator

The Tension Load Cell PCE-DDM 5WI is the ideal tool for weighing big loads and for measuring strong tensile forces. The Tension Load Cell PCE-DDM 5WI is delivered in a protective carrying case and includes two shackles made of heavy-duty aluminum. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.

- Measurement range: 5,000 kg / 50 kN / 11,023 lbs
- Resolution: 2 kg / 20 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied without remote control indicator