The PCE-CIC 11 color viewing box is a simulation instrument, which is mainly used in quality control. The color viewing box accurately  corrects light types and thus enables the direct comparison of products which must have special color characteristics.

- Simulation of different light types
- Hour counter for each light type
- Short warm-up time
- According to ASTM D1729, ISO3664, DIN, ANSI, BSI

- Dew point, H2O, temperature, humidity measurement
- Data memory for approx. 50,000 measurement data
- CSV data export
- With G1 / 2" connection thread
- For inline measurement of pressure pipes
- Sensor protected with a cap
- Left connection has NO function

- Dew point, H2O, temperature, humidity measurement
- Data memory for approx. 50,000 measurement data
- CSV data export
- With G1 / 2" connection thread
- For inline measurement of pressure pipes
- Sensor protected with a cap
- Left connection has NO function

- Dew point, H2O, temperature, humidity measurement
- Data memory for approx. 50,000 measurement data
- CSV data export
- With G1 / 2" connection thread
- For inline measurement of pressure pipes
- Sensor protected with a cap
- Left connection has NO function

- Dew point, H2O, temperature, humidity measurement
- Data memory for approx. 50,000 measurement data
- CSV data export
- With G1 / 2" connection thread
- For inline measurement of pressure pipes
- Sensor protected with a cap
- Left connection has NO function

- Dew point, H2O, temperature, humidity measurement
- Data memory for approx. 50,000 measurement data
- CSV data export
- With G1 / 2" connection thread
- For inline measurement of pressure pipes
- Sensor protected with a cap
- Left connection has NO function

- Dew point, H2O, temperature, humidity measurement
- Data memory for approx. 50,000 measurement data
- CSV data export
- With G1 / 2" connection thread
- For inline measurement of pressure pipes
- Sensor protected with a cap
- Left connection has NO function

- Dew point, H2O, temperature, humidity measurement
- Data memory for approx. 50,000 measurement data
- CSV data export
- With G1 / 2" connection thread
- For inline measurement of pressure pipes
- Sensor protected with a cap
- Left connection has NO function

- Dew point, H2O, temperature, humidity measurement
- Data memory for approx. 50,000 measurement data
- CSV data export
- With G1 / 2" connection thread
- For inline measurement of pressure pipes
- Sensor protected with a cap
- Left connection has NO function

- Dew point, H2O, temperature, humidity measurement
- Data memory for approx. 50,000 measurement data
- CSV data export
- With G1 / 2" connection thread
- For inline measurement of pressure pipes
- Sensor protected with a cap
- Left connection has NO function

The Xgard-1-CL2 is a single-gas Gas Leak Detector used to warn for gases (Chlorine, CL₂, 0 ... 5 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Chlorine, CL₂, 0 ... 5 ppm)
- Additional display and alarm station
- ATEX or UL approval

Due to its ball bearing, the load cell has a special resistance against lateral forces. The load cell has a strong output signal of approx. 4 mV / V and works with a measurement uncertainty of 0.03% F.S.. The load cell is used especially in harsh environments such as truck scales, train scales, machine weighing, etc..

- Rated load / force F.S.: 100 t / 1 MN
- Corrosion resistant IP67
- Bearing surface ball bearing
- 700 Ohm

 

- Other force sensor nominal loads available - see variants!

Gas Detector AQ-200 is a highly accurate instrument for measuring ozone concentrations in the air. The Gas Detector can be equipped with four different heads that vary in their measurement range.

- High accuracy and functionality
- Interchangeable sensor heads!
- Battery operation
- Sensor head OZU included in delivery (Ozone 0-0.15 ppm)

 

The PCE-SGM 60 gloss meter with small measuring area is used on many types of surfaces to quantify their gloss units. This gloss-measuring device operates on the reflection principle by sending light from a calibrated light source onto the surface to be tested and then calculates the gloss level of the surface according to the reflection of light particles. This gloss meter allows you to measure very high gloss surfaces above 70 gloss units (GU).

- Measurement geometry: 60° degree angle
- Measurement up to 1000 gloss units
- Internal reading memory up to 5000 readings
- 3.5" TFT display
- Light source: D65
- Wave length: 400-700 nm

 

The PCE-SGM 60 gloss meter with small measuring area is used on many types of surfaces to quantify their gloss units. This gloss-measuring device operates on the reflection principle by sending light from a calibrated light source onto the surface to be tested and then calculates the gloss level of the surface according to the reflection of light particles. These gloss test instruments allow you to measure very high gloss surfaces above 70 gloss units (GU).

Ozone Meter AQ-200 is a highly accurate instrument for measuring ozone concentrations in the air. The Ozone Meter can be equipped with four different heads that vary in their measurement range.

- High accuracy and functionality
- Interchangeable sensor heads!
- Battery operation
- Sensor head OZU included in delivery (Ozone 0-0.15 ppm)