Checkweighing Scale  with high resolution (0.0001 g), RS-232-interface and optional software-kit / with weighing ranges of 0 ... 100 g.

- Weighing capacity: 100 g
- Readability: 0.0001 g  (0.1 mg)
- High precision
- Precise parts counting

 

This Counting Scales gets stable stand from their die cast aluminum housing. The glass weighing chamber avoids wind influences. Designed for uncomplicated performance, the PCE-ABZ 100C Counting Scales have only those features necessary for routine weighing along with a few design and performance extras.

- Weighing Range: 0 ... 100 g
- Readability: 0.0001 g (0.1 mg)
- High precision
- LC-Display
- Stability indicator

 

The MCWNT6M-3 is a verifiable Crane Scale, available in three versions, weighing up to a maximum of 6000 kg. With compact dimensions, the Crane Scales are useful for many applications. The MCWNT6M-3 is powered by 4 conventional AA batteries. The Crane Scales are delivered manufacturer calibrated, but can optionally be certified according to ISO standards.

- Maximum load: 6000 kg
- Resolution: 2 kg
- Percentage weighing
- EC-Type Approval M III

 

Density Determination Scale with high resolution (0.0001 g), RS-232-interface and optional software-kit / with weighing ranges of 0 ... 100 g.

- Weighing capacity: 100 g
- Readability: 0.0001 g  (0.1 mg)
- High precision
- Precise parts counting

 

The MCWNT6M-3 is a verifiable Force Gauge, available in three versions, weighing up to a maximum of 6000 kg. With compact dimensions, the Force Gauge is useful for many applications. The MCWNT6M-3 is powered by 4 conventional AA batteries. The Force Gauge is delivered manufacturer calibrated, but can optionally be certified according to ISO standards.

- Maximum load: 6000 kg
- Resolution: 2 kg
- Percentage weighing
- EC-Type Approval M III

Due to its ball bearing, the load cell has a special resistance against lateral forces. The load cell has a strong output signal of approx. 4 mV / V and works with a measurement uncertainty of 0.03% F.S.. The load cell is used especially in harsh environments such as truck scales, train scales, machine weighing, etc..

- Rated load / force F.S.: 100 t / 1 MN
- Corrosion resistant IP67
- Bearing surface ball bearing
- 700 Ohm

 

- Other force sensor nominal loads available - see variants!

Gas Detector AQ-200 is a highly accurate instrument for measuring ozone concentrations in the air. The Gas Detector can be equipped with four different heads that vary in their measurement range.

- High accuracy and functionality
- Interchangeable sensor heads!
- Battery operation
- Sensor head OZU included in delivery (Ozone 0-0.15 ppm)

 

The PCE-SGM 60 gloss meter with small measuring area is used on many types of surfaces to quantify their gloss units. This gloss-measuring device operates on the reflection principle by sending light from a calibrated light source onto the surface to be tested and then calculates the gloss level of the surface according to the reflection of light particles. This gloss meter allows you to measure very high gloss surfaces above 70 gloss units (GU).

- Measurement geometry: 60° degree angle
- Measurement up to 1000 gloss units
- Internal reading memory up to 5000 readings
- 3.5" TFT display
- Light source: D65
- Wave length: 400-700 nm

 

The PCE-SGM 60 gloss meter with small measuring area is used on many types of surfaces to quantify their gloss units. This gloss-measuring device operates on the reflection principle by sending light from a calibrated light source onto the surface to be tested and then calculates the gloss level of the surface according to the reflection of light particles. These gloss test instruments allow you to measure very high gloss surfaces above 70 gloss units (GU).

The MCWNT6M-3 are verifiable hanging scales, available in three versions, weighing up to a maximum of 6000 kg. With compact dimensions, the hanging scales are useful for many applications. The MCWNT6M is powered by 4 conventional AA batteries. The hanging scales are delivered manufacturer calibrated, but can optionally be certified according to ISO standards.

- Maximum load: 6000 kg
- Resolution: 2 kg
- Percentage weighing
- EC-Type Approval M III

Industrial Scales with high resolution (0.0001 g), RS-232-interface and optional software-kit / with weighing ranges of 0 ... 100 g.

- Weighing capacity: 100 g
- Readability: 0.0001 g  (0.1 mg)
- High precision
- Precise parts counting

 

Laboratory Scale with high resolution (0.0001 g), RS-232-interface and optional software-kit / with weighing ranges of 0 ... 100 g.

- Weighing capacity: 100 g
- Readability: 0.0001 g  (0.1 mg)
- High precision
- Precise parts counting

 

Ozone Meter AQ-200 is a highly accurate instrument for measuring ozone concentrations in the air. The Ozone Meter can be equipped with four different heads that vary in their measurement range.

- High accuracy and functionality
- Interchangeable sensor heads!
- Battery operation
- Sensor head OZU included in delivery (Ozone 0-0.15 ppm)

 

Piece Counting Scale with high resolution (0.0001 g), RS-232-interface and optional software-kit / with weighing ranges of 0 ... 100 g.

- Weighing capacity: 100 g
- Readability: 0.0001 g  (0.1 mg)
- High precision
- Precise parts counting

 

This Precision Balances gets stable stand from their die cast aluminum housing. Designed for uncomplicated performance, the PCE-ABZ 100C Precision Balances have only those features necessary for routine weighing along with a few design and performance extras that help eliminate common nuisances that can arise in laboratory, industrial and educational settings.

- Weighing capacity: 100 g
- Readability: 0.0001 g  (0.1 mg)
- High precision
- Precise parts counting

 

Scale with high resolution (0.0001 g), RS-232-interface and optional software-kit / with weighing ranges of 0 ... 100 g.

- Weighing capacity: 100 g
- Readability: 0.0001 g  (0.1 mg)
- High precision
- Precise parts counting

 

The PCE-SGM 60 surface tester and gloss meter with small measuring area is used on many types of surfaces to quantify their gloss units. This gloss-measuring device operates on the reflection principle by sending light from a calibrated light source onto the surface to be tested and then calculates the gloss level of the surface according to the reflection of light particles. This meter allows you to measure very high gloss surfaces above 70 gloss units (GU).

- Measurement geometry: 60° degree angle
- Measurement up to 1000 gloss units
- Internal reading memory up to 5000 readings
- 3.5" TFT display
- Light source: D65
- Wave length: 400-700 nm

 

Tabletop Scale with high resolution (0.0001 g), RS-232-interface and optional software-kit / with weighing ranges of 0 ... 100 g.

- Weighing capacity: 100 g
- Readability: 0.0001 g  (0.1 mg)
- High precision
- Precise parts counting

 

The Xgard-1-SO2 is a single-gas Gas Leak Detector used to warn for gases (Sulfur Dioxide, SO₂, 0 ... 10 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Sulfur Dioxide, SO₂, 0 ... 10 ppm)
- Additional display and alarm station
- ATEX or UL approval

The Material Surface Roughness Tester PCE-RT 10 is a small, light device with simple navigation. Despite the fact that the device functions on a very complex and elaborate level, the measurement results can be acquired quickly and in an accurate way. Very simple to operate with a motorized diamond sensor.

- Measures Ra in Metric (µm) and Imperial (µinch)
- Ra 0.05 to 10um / 2 µinch ... 400 µinch measurement range
- Rz 0.02 to 100um / 3.93 µinch ... 1968.50 µinch measurement range
- Induction method with Diamond sensor
- Accuracy < ± 10% and Repeatability < 6%
- With threshold function
- Uses 4 AA Batteries (Included)