The PCE Instruments PCE-2000N durometer uses the Leeb rebound method. This is a dynamic hardness test method in which a standardized test specimen, usually a hard metal ball, is hit with defined impact energy on a test surface.

- Measurement according to Leeb Rebound method
- Hardness scales: HL (Leeb), HV (Vickers), HB (Brinell), HS (Shore), HRA (Rockwell A), HRB (Rockwell B), HRC (Rockwell C)
- Measurement Range: 170-960 HLD, 80-1042 HV, 19-683 HB, 30.6-102.6 HS, 59.1-88 HRA, 13.5-101.7 HRB
- External impact device on 1.5 m / 4.9 ft cable
- Accuracy: ± 0.5% (@ 800 HLD), Repeatability: 0.8% (@ 800 HLD)
- Storage data measurements on a USB stick
- Color display, Measurement in different angles possible, Various other impactors as accessories

The Electromagnetic Field Meter is used in the laboratory and quality assurance to measure the strength of magnetic fields. The Electromagnetic Field Meter is delivered with two different sensors. A magnetic field sensor is available for general measurements in the Gauss and milli-Tesla range, as well as a precision sensor for measurements in the milli-Gauss and micro-Tesla range.

- Tabletop device with 2 sensors

            General Probe Range: 0-3000 milli-Tesla (0-30,000 Gauss)

            Precision Probe Range: 0-300 micro-Tesla (0-3000 milli-Gauss)

- For static and changing magnetic fields

- Highly accurate Transverse Hall sensor

- Different units selectable  (mG / µT)

- Data storage on SD memory card

The Electromagnetic Radiation Detector is used in the laboratory and quality assurance to measure the strength of magnetic fields. The Electromagnetic Radiation Detector is delivered with two different sensors. A magnetic field sensor is available for general measurements in the Gauss and milli-Tesla range, as well as a precision sensor for measurements in the milli-Gauss and micro-Tesla range.

- Tabletop device with 2 sensors

            General Probe Range: 0-3000 milli-Tesla (0-30,000 Gauss)

            Precision Probe Range: 0-300 micro-Tesla (0-3000 milli-Gauss)

- For static and changing magnetic fields

- Highly accurate Transverse Hall sensor

- Different units selectable  (mG / µT)

- Data storage on SD memory card

The gauss meter PCE-MFM 4000 is used in the laboratory and quality assurance to measure the strength of magnetic fields. The gauss meter is delivered with two different sensors. A magnetic field sensor is available for general measurements in the Gauss and milli-Tesla range, as well as a precision sensor for measurements in the milli-Gauss and micro-Tesla range.

- Tabletop device with 2 sensors

            General Probe Range: 0-3000 milli-Tesla (0-30,000 Gauss)

            Precision Probe Range: 0-300 micro-Tesla (0-3000 milli-Gauss)

- For static and changing magnetic fields

- Highly accurate Transverse Hall sensor

- Different units selectable  (mG / µT)

- Data storage on SD memory card

The magnetometer PCE-MFM 4000 is used in the laboratory and quality assurance to measure the strength of magnetic fields. The magnetometer is delivered with two different sensors. A magnetic field sensor is available for general measurements in the Gauss and milli-Tesla range, as well as a precision sensor for measurements in the milli-Gauss and micro-Tesla range.

- Tabletop device with 2 sensors

            General Probe Range: 0-3000 milli-Tesla (0-30,000 Gauss)

            Precision Probe Range: 0-300 micro-Tesla (0-3000 milli-Gauss)

- For static and changing magnetic fields

- Highly accurate Transverse Hall sensor

- Different units selectable  (mG / µT)

- Data storage on SD memory card

The manometer PCE-DMM 60 is a precision instrument of the highest standards. The manometer is specifically designed for process monitoring and calibration. This manometer is distinguished by its modular concept. This means that the actual sensor and the display can be separated. The pressure transmitter can be selected on site for different measuring ranges and connected to the display without tools.

- Max. 400 bar / 5801 psi
- Media: water, gases
- Pressure type: Absolute / Relative
- Diaphragm: stainless steel
- Accuracy: 0.05

The manometer PCE-DMM 70 is a precision instrument for leakage testing. The manometer is specifically designed for leak testing of pipe networks. The actual manometer and the display of this precision instrument can be separated without tools. The measurement values are stored in the internal memory.

- Max. 400 bar / 5801 psi
- For leakage testing
- Media: water, gases
- Pressure type: Absolute / Relative
- Membrane: Stainless Steel
- Accuracy class: 0.05

The pressure gauge PCE-DMM 60 is a precision instrument of the highest standards. The pressure gauge is specifically designed for process monitoring and calibration. This pressure gauge is distinguished by its modular concept. This means that the actual sensor and the display can be separated. The pressure transmitter can be selected on site for different measuring ranges and connected to the display without tools.

- Max. 400 bar / 5801 psi
- Media: water, gases
- Pressure type: Absolute / Relative
- Diaphragm: stainless steel
- Accuracy: 0.05

The pressure gauge PCE-DMM 70 is a precision instrument for leakage testing. The pressure gauge is specifically designed for leak testing of pipe networks. The actual pressure gauge and the display of this precision instrument can be separated without tools. The measurement values are stored in the internal memory.

- Max. 400 bar / 5801 psi
- For leakage testing
- Media: water, gases
- Pressure type: Absolute / Relative
- Membrane: Stainless Steel
- Accuracy class: 0.05

The pressure indicator PCE-DMM 60 is a precision instrument of the highest standards. The pressure indicator is specifically designed for process monitoring and calibration. This pressure indicator is distinguished by its modular concept. This means that the actual sensor and the display can be separated. The pressure transmitter can be selected on site for different measuring ranges and connected to the display without tools.

- Max. 400 bar / 5801 psi
- Media: water, gases
- Pressure type: Absolute / Relative
- Diaphragm: stainless steel
- Accuracy: 0.05 

The pressure indicator PCE-DMM 70 is a precision instrument for leakage testing. The pressure indicator is specifically designed for leak testing of pipe networks. The actual pressure indicator and the display of this precision instrument can be separated without tools. The measurement values are stored in the internal memory.

- Max. 400 bar / 5801 psi
- For leakage testing
- Media: water, gases
- Pressure type: Absolute / Relative
- Membrane: Stainless Steel
- Accuracy class: 0.05

The pressure meter PCE-DMM 60 is a precision instrument of the highest standards. The pressure meter is specifically designed for process monitoring and calibration. This pressure meter is distinguished by its modular concept. This means that the actual sensor and the display can be separated. The pressure transmitter can be selected on site for different measuring ranges and connected to the display without tools.

- Max. 400 bar / 5801 psi
- Media: water, gases
- Pressure type: Absolute / Relative
- Diaphragm: stainless steel
- Accuracy: 0.05

The pressure meter PCE-DMM 70 is a precision instrument for leakage testing. The pressure meter is specifically designed for leak testing of pipe networks. The actual pressure sensor and the display of this precision instrument can be separated without tools. The measurement values are stored in the internal memory.

- Max. 400 bar / 5801 psi
- For leakage testing
- Media: water, gases
- Pressure type: Absolute / Relative
- Membrane: Stainless Steel
- Accuracy class: 0.05

The pressure sensor PCE-DMM 60 is a precision instrument of the highest standards. The pressure sensor is specifically designed for process monitoring and calibration. This pressure sensor is distinguished by its modular concept. This means that the actual sensor and the display can be separated. The pressure transmitter can be selected on site for different measuring ranges and connected to the display without tools.

- Max. 400 bar / 5801 psi
- Media: water, gases
- Pressure type: Absolute / Relative
- Diaphragm: stainless steel
- Accuracy: 0.05