Industrial Measurement Products and Solutions
Order no.: Xgard-1-CL2

The Xgard-1-CL2 is a single-gas Gas Leak Detector used to warn for gases (Chlorine, CL2, 0 ... 5 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Chlorine, CL2, 0 ... 5 ppm)
- Additional display and alarm station
- ATEX or UL approval

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: PCE-MCWNT9RF

The PCE-MCWNT9RF is a verifiable Crane Scale, available in three versions, weighing up to a maximum of 9000 kg. With compact dimensions, the Crane Scale is useful for many applications. The MCWNT9RF is powered by 4 conventional AA batteries. The Crane Scale is delivered manufacturer calibrated, but can optionally be certified according to ISO standards.


- Maximum load: 9000 kg
- Resolution: 1 kg - 3000 kg / 2 kg - 6000 kg / 5 kg - 9000 kg
- 868 MHz Multipoint wireless module for connection to printer or PC

 

Manufacturer: Dini Argeo GmbH
Test Instruments manufacturer
Order no.: PCE-MCWNT9RF

The PCE-MCWNT9RF is a verifiable Force Gauge, available in three versions, weighing up to a maximum of 9000 kg. With compact dimensions, the Force Gauge is useful for many applications. The MCWNT9RF is powered by 4 conventional AA batteries. The Force Gauge is delivered manufacturer calibrated, but can optionally be certified according to ISO standards.


- Maximum load: 9000 kg
- Resolution: 1 kg - 3000 kg / 2 kg - 6000 kg / 5 kg - 9000 kg
- 868 MHz Multipoint wireless module for connection to printer or PC

Manufacturer: Dini Argeo GmbH
Test Instruments manufacturer
Order no.: PCE-MCWNT9RF

The PCE-MCWNT9RF is a verifiable hanging scale, available in three versions, weighing up to a maximum of 9000 kg. With compact dimensions, the hanging scales are useful for many applications. The MCWNT9RF is powered by 4 conventional AA batteries. The hanging scales are delivered manufacturer calibrated, but can optionally be certified according to ISO standards.


- Maximum load: 9000 kg
- Resolution: 1 kg - 3000 kg / 2 kg - 6000 kg / 5 kg - 9000 kg
- 868 MHz Multipoint wireless module for connection to printer or PC

Manufacturer: Dini Argeo GmbH
Test Instruments manufacturer
Order no.: Xgard-1-Cl2

The Xgard-1-CL2 is a single-gas Gas detector used to warn for gases (Chlorine, CL2, 0 ... 5 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).


- Stationary
- For (Chlorine, CL2, 0 ... 5 ppm)
- Additional display and alarm station
- ATEX or UL approval

 

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: PCE-DFG N 2.5K
The PCE-DFG N 2.5K dynamometer measures both tensile forces and compressive forces with very high resolution. The tensile force and the compressive force are often determined in the laboratory, for example, to determine the yield, the breakaway force, the force required to push a button or switch. You can buy the dynamometer PCE-DFG N 2.5K here in our online shop. 

- Measuring range: 0 ... 2,500 N / 0 ... 562 lbs
- Resolution: 1 N / 0.22 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DFG N 2.5K
The PCE-DFG N 2.5K force gauge measures both tensile forces and compressive forces with very high resolution. The tensile force and the compressive force are often determined in the laboratory, for example, to determine the yield, the breakaway force, the force required to push a button or switch. You can buy the force gauge PCE-DFG N 2.5K here in our online shop. 

- Measuring range: 0 ... 2,500 N / 0 ... 562 lbs
- Resolution: 1 N / 0.22 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DFG N 1K
The PCE-DFG N 1K dynamometer measures both tensile forces and compressive forces with very high resolution. The tensile force and the compressive force are often determined in the laboratory, for example, to determine the yield, the breakaway force, and the force required to push a button or switch.

- Measuring range: 0 ... 1,000 N / 0 ... 225 lbs
- Resolution: 0.5 N / 0.11 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DFG N 1K
The PCE-DFG N 1K force gauge measures both tensile forces and compressive forces with very high resolution. The tensile force and the compressive force are often determined in the laboratory, for example, to determine the yield, the breakaway force, and the force required to push a button or switch.

- Measuring range: 0 ... 1,000 N / 0 ... 225 lbs
- Resolution: 0.5 N / 0.11 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: AQ-200 Set EOZ

Gas Detector AQ-200 is a highly accurate instrument for measuring ozone concentrations in the air. The Gas Detector can be equipped with four different heads that vary in their measurement range.


- High accuracy and functionality
- Interchangeable sensor heads!
- Battery operation
- Sensor head EOZ included in delivery (Ozone 0-10 ppm)

 

Manufacturer: Aeroqual
Test Instruments manufacturer
Order no.: AQ-200 Set OZL
Gas Detector AQ-200 is a highly accurate instrument for measuring ozone concentrations in the air. The Gas Detector can be equipped with four different heads that vary in their measurement range.

- High accuracy and functionality
- Interchangeable sensor heads!
- Battery operation
- Sensor head OZL included in delivery (Ozone 0... 0.5 ppm)
-
Manufacturer: Aeroqual
Test Instruments manufacturer
Order no.: PCE-MSR 405
The magnetic stirrer PCE-MSR 405 is equipped with a heater. Thus, the magnetic stirrer with heating, liquids can heat up to 120°C / 248°F and mix or stir at the same time. The magnetic stirrer PCE-405 with heating has 5 stirring points, so that several liquids can be stirred simultaneously in the laboratory during a test. 

- Number of stirring points 5
- Max. Stirring quantity: 2000 ml
- Adjustable up to 1500 rpm
- Maximum 120°C / 248°F
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MSR 405
The laboratory stirrer PCE-MSR 405 is equipped with a heater. Thus, the laboratory stirrer with heating, liquids can heat up to 120°C / 248°F and mix or stir at the same time. The laboratory stirrer PCE-405 with heating has 5 stirring points, so that several liquids can be stirred simultaneously in the laboratory during a test. 

- Number of stirring points 5
- Max. Stirring quantity: 2000 ml
- Adjustable up to 1500 rpm
- Maximum 120°C / 248°F
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: AQ-200 Set EOZ

Ozone Meter AQ-200 is a highly accurate instrument for measuring ozone concentrations in the air. The Ozone Meter can be equipped with four different heads that vary in their measurement range.


- High accuracy and functionality
- Interchangeable sensor heads!
- Battery operation
- Sensor head EOZ included in delivery (Ozone 0-10 ppm)

 

Manufacturer: Aeroqual
Test Instruments manufacturer
Order no.: AQ-200 Set OZL
Ozone Meter AQ-200 is a highly accurate instrument for measuring ozone concentrations in the air. The Ozone Meter can be equipped with four different heads that vary in their measurement range.

- High accuracy and functionality
- Interchangeable sensor heads!
- Battery operation
- S
ensor head OZL included in delivery (Ozone 0-0.5 ppm)
Manufacturer: Aeroqual
Test Instruments manufacturer
Order no.: 8368.WS10P

The weather station Lufft WS10 measures 10 parameters simultaneously. The weather station measures temperature, relative humidity, air pressure, wind speed / direction, precipitation amount / intensity / type, UV index, sun position, brightness and twilight and global radiation. The weather station WS10 is ideal for building automation, smart city applications, and solar roofs. The data transmission takes place via W-Lan or RS485.

 

- Weather station for 10 parameters
- Wifi & Modbus interface
- Suitable for automation technology

Manufacturer: Lufft
Test Instruments manufacturer
Order no.: PCE-ABZ 200C

This Analytical Balance gets stable stand from its die cast aluminum housing. The glass weighing chamber of the Analytical Balance avoids wind influences.


- Weighing capacity: 200 g
- Readability: 0.0001 g  (0.1 mg)
- High precision
- Precise parts counting

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-ABZ 200C

Checkweighing Scale with high resolution (0.0001 g), RS-232 interface.


- Weighing capacity: 200 g
- Readability: 0.0001 g  (0.1 mg)
- High precision
- Precise parts counting

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-ABZ 200C

This Counting Scales gets stable stand from their die cast aluminum housing. The glass weighing chamber avoids wind influences. Designed for uncomplicated performance, the PCE-ABZ 200C Counting Scales have only those features necessary for routine weighing along with a few design and performance extras.


- Weighing Range: 0 ... 200 g
- Readability: 0.0001 g (0,1 mg)
- High precision
- LC-Display
- Stability indicator

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-ABZ 200C

Density Determination Scale with high resolution (0.0001 g), RS-232-interface.


- Weighing capacity: 200 g
- Readability: 0.0001 g  (0.1 mg)
- High precision
- Precise parts counting

 

Manufacturer: PCE Instruments
Test Instruments manufacturer