Industrial Measurement Products and Solutions
Order no.: PCE-VDR 10-ICA

PCE-VDR 10-ICA is a single-axis accelerometer or vibration data logger monitor with real-time measurement and data logging capabilities. This vibration data logger records acceleration (m/s, g, ft/s) as well as velocity (mm/s, cm/s, in/s) measurements and saves the measured data to an included SD card memory. There is also an analog output, which makes this vibration data logger compatlble to control systems.

- Acceleration measuring range: 
  0.5 ... 199.9 m/s, 0.05 ... 20.39 g, 2 ... 656 ft/s
- Velocity measuring ranges: 
  0.5 ... 199.9 mm/s, 0.05 ... 19.99 cm/s, 0.02 ... 7.87 in/s
- Frequency range: 10 ... 1000 Hz
- Analog output: 4 ... 20 mA
- RS-232 and USB interface
- incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-G1

Humidity Meter for relative humidity and metric temperature visible from up to 50 m distance. The Humidity Meter is composed of a 100mm high LED and comes with IP54 rating. Celcius only temperature display.

- Measurement ranges relative humidity / temperature:   10 to 95% r.h. / 0 to 60°C
- Resolution relative humidity / temperature: 1% r.h. / 1°C
- Accuracy relative humidity / temperature: ±2% r.h. / 1°C
- Display: 100 mm high LED (alternates values)
- Protection: IP 54

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: Gasman-O3

The Air Quality Meter Gasman-O3 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Air Quality Meter warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Air Quality Meter fulfills all the European and international norms, even ATEX and UL standards.


- For O3 (Ozone)
- Dust and water resistant - IP 65/67
- 0 ... 1 ppm
- Non-rechargeable, 1-year battery

 

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: PCE-G1

PCE-G1 is an indoor air quality meter with a large display. This IP54-rated wall-mountable device measures both relative humidity (%RH) and temperature (°C only). The PCE-G1 air quality meter has a large LED display with a number height of 100 mm, so measurement values can be seen at a distance of up to 50 m away. Celcius only temperature display.


- Measurement ranges: 10 to 95 % RH / 0 to +60 °C
- Resolution relative humidity / temperature: 1% RH / 1 °C
- Accuracy relative humidity / temperature: ±2% RH / 1 °C
- Display: 100 mm tall LED digits (alternates values)

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-G1

The PCE-G1 Environmental Meter has been designed for measuring relative humidity and temperature, with readings shown on its high visibility display. The Environmental Meter is composed of a 100 mm high LED and comes with IP54 rating. Celcius only temperature display.


- Relative humidity / temperature: 10 to 95% r.h. / 0 to 60 °C
- Resolution relative humidity / temperature: 1% r.h. / 1 °C
- Accuracy relative humidity / temperature: ±2% r.h. / 1 °C
- Display: 100 mm high LED (alternates values)
- Protection: IP 54

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: Gasman-NH3

The Gas Detector Gasman-NH3 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Gas Detector warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Gas Detector fulfills all the European and international norms, even ATEX and UL standards.


- Non-rechargeable, 1-year battery
- For NH3 (Ammonia Gas)
- Dust and water resistant - IP 65/67
- 0 ... 100 ppm

 

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: Gasman-O3

The Gas Detector Gasman-O3 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Gas Detector warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Gas Detector fulfills all the European and international norms, even ATEX and UL standards.


- For O3 (Ozone)
- Dust and water resistant - IP 65/67
- 0 ... 1 ppm
- Non-rechargeable, 1-year battery 

 

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: Gasman-NH3

The Gas Leak Detector Gasman-NH3 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Gas Leak Detector warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Gas Leak Detector fulfills all the European and international norms, even ATEX and UL standards.


- Non-rechargeable, 1-year battery
- For NH3 (Ammonia Gas)
- Dust and water resistant - IP 65/67
- 0 ... 100 ppm

 

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: Gasman-O3

The Gas Leak Detector Gasman-O3 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Gas Leak Detector warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement.


- For O3 (Ozone)
- Dust and water resistant - IP 65/67
- 0 ... 1 ppm
- Non-rechargeable, 1-year battery

 

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: PCE-950

PCE-950 is a handheld material hardness tester used to determine the hardness of 10 different types of metal (i.e., cast steel, hammered steel, cold-rolled steel, stainless steel, cast iron, ductile iron, aluminum alloy, brass, bronze and forged copper alloy) according to the Leeb rebound method. In addition to Leeb hardness units, the metal hardness tester displays hardness measurements in Rockwell C, Rockwell B, Rockwell A, Brinell, Vickers and Shore hardness units.

- Measurement ranges: 19.8-68.5 HRC / 13.5-101.7 HRB / 59.1-85.8 HRA / 19-655 HB / 80-976 HV / 32.2-115 HS 
- Hardness units: HL, HRC, HRB, HRA, HB, HV, HS
- Accuracy: ± 2% / Repeatability: ± 2%
- Impact device: Type D (integrated)
- Data Analysis Software
- For use with hammered steel, cold-rolled steel, stainless steel, cast iron, ductile iron, aluminum alloy, brass, bronze and forged copper alloy metals

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-950

PCE-950 is a handheld metal hardness durometer used to determine the hardness of 10 different types of metal (i.e., cast steel, hammered steel, cold-rolled steel, stainless steel, cast iron, ductile iron, aluminum alloy, brass, bronze and forged copper alloy) according to the Leeb rebound method. In addition to Leeb hardness units, the metal hardness tester displays hardness measurements in Rockwell C, Rockwell B, Rockwell A, Brinell, Vickers and Shore hardness units.

- Measurement ranges: 19.8-68.5 HRC / 13.5-101.7 HRB / 59.1-85.8 HRA / 19-655 HB / 80-976 HV / 32.2-115 HS 
- Hardness units: HL, HRC, HRB, HRA, HB, HV, HS
- Accuracy: ± 2% / Repeatability: ± 2%
- Impact device: Type D (integrated)
- Data Analysis Software
- For use with hammered steel, cold-rolled steel, stainless steel, cast iron, ductile iron, aluminum alloy, brass, bronze and forged copper alloy metals

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-950

PCE-950 is a handheld metal hardness tester used to determine the hardness of 10 different types of metal (i.e., cast steel, hammered steel, cold-rolled steel, stainless steel, cast iron, ductile iron, aluminum alloy, brass, bronze and forged copper alloy) according to the Leeb rebound method. In addition to Leeb hardness units, the metal hardness tester displays hardness measurements in Rockwell C, Rockwell B, Rockwell A, Brinell, Vickers and Shore hardness units.

- Measurement ranges: 19.8-68.5 HRC / 13.5-101.7 HRB / 59.1-85.8 HRA / 19-655 HB / 80-976 HV / 32.2-115 HS 
- Hardness units: HL, HRC, HRB, HRA, HB, HV, HS
- Accuracy: ± 2% / Repeatability: ± 2%
- Impact device: Type D (integrated)
- Data Analysis Software
- For use with hammered steel, cold-rolled steel, stainless steel, cast iron, ductile iron, aluminum alloy, brass, bronze and forged copper alloy metals

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-950

PCE-950 is a handheld material hardness tester used to determine the hardness of 10 different types of metal (i.e., cast steel, hammered steel, cold-rolled steel, stainless steel, cast iron, ductile iron, aluminum alloy, brass, bronze and forged copper alloy) according to the Leeb rebound method. In addition to Leeb hardness units, the metal hardness tester displays hardness measurements in Rockwell C, Rockwell B, Rockwell A, Brinell, Vickers and Shore hardness units.

- Measurement ranges: 19.8-68.5 HRC / 13.5-101.7 HRB / 59.1-85.8 HRA / 19-655 HB / 80-976 HV / 32.2-115 HS 
- Hardness units: HL, HRC, HRB, HRA, HB, HV, HS
- Accuracy: ± 2% / Repeatability: ± 2%
- Impact device: Type D (integrated)
- Data Analysis Software
- For use with hammered steel, cold-rolled steel, stainless steel, cast iron, ductile iron, aluminum alloy, brass, bronze and forged copper alloy metals

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-G1

Humidity detector to measure relative humidity and temperature visible from up to 50 m distance. The humidity meter is composed of a 100mm high LED and comes with IP54 rating. Celcius only temperature display.

- Measurement ranges relative humidity / temperature: 10 to 95% r.h. / 0 to 60  °C
- Resolution relative humidity / temperature: 1% r.h. / 1 °C
- Accuracy relative humidity / temperature: ±2% r.h. / 1 °C
- Display: 100 mm high LED (alternates values)
- Protection: IP 54 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-G1

The PCE-G1 HVAC Meter has been designed for measuring relative humidity and temperature, with readings shown on its high visibility display. The HVAC Meter is composed of a 100mm high LED and comes with IP54 rating. Celcius only temperature display.

- Measurement ranges relative humidity / temperature: 10 to 95% r.h. / 0 to 60  °C
- Resolution relative humidity / temperature: 1% r.h. / 1 °C
- Accuracy relative humidity / temperature: ±2% r.h. / 1 °C
- Display: 100 mm high LED (alternates values)
- Protection: IP 54

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-G1

The PCE-G1 hygrometer has been designed for measuring relative humidity and temperature, with readings shown on its high visibility display. The hygrometer is composed of a 100 mm high LED and comes with IP54 rating. This hygrometer has a display that will alternate values and show relative humidity for 2 seconds followed by temperature for 2 seconds. All test instruments are delivered manufacturer calibrated. An ISO certification is available optionally. Celcius only temperature display.

- Measurement ranges relative humidity / temperature: 10 ... 95 % r.H. / 0 ... +60  °C
- Resolution relative humidity / temperature: 1 % r.H. / 1 °C
- Accuracy relative humidity / temperature: ±2 % r.H. / 1 °C
- Display: 100 mm high LED (alternates values)
- Protection: IP 54

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: Gasman-O3

The Ozone Meter Gasman-O3 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Ozone Meter warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Ozone Meter fulfills all the European and international norms, even ATEX and UL standards.


- For O3 (Ozone)
- Dust and water resistant - IP 65/67
- 0 ... 1 ppm
- Non-rechargeable, 1-year battery 

 

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: PCE-G1

The PCE-G1 Relative Humidity Meter has been designed for measuring relative humidity and temperature, with readings shown on its high visibility display. The Relative Humidity Meter is composed of a 100 mm high LED (visible from up to 50 m distance) and comes with IP54 rating. Celcius only temperature display.

- Measurement ranges relative humidity / temperature: 10 to 95% r.h. / 0 to 60  °C
- Resolution relative humidity / temperature: 1% r.h. / 1 °C
- Accuracy relative humidity / temperature: ±2% r.h. / 1 °C
- Display: 100 mm high LED (alternates values)
- Protection: IP 54 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-G1

The PCE-G1 temperature meter has been designed for measuring relative humidity and temperature, with readings shown on its high visibility display. The temperature meter is composed of a 100 mm high LED and comes with IP54 rating. Each temperature meter comes manufacturer calibrated and can be certified according to the ISO standards as an option. Celcius only temperature display.

- Measurement ranges relative humidity / temperature: 10 to 95% r.H. / 0 to 60  °C
- Resolution relative humidity / temperature: 1 % r.H. / 1 °C
- Accuracy relative humidity / temperature: ±2 % r.H. / 1 °C
- Display: 100 mm high LED (alternates values)
- Protection: IP 54

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-G1

Thermometer to relative humidity and temperature, visible from up to 50 m distance. The thermometer is composed of a 100 mm high LED and comes with IP54 rating. Celcius only temperature display.

- Measurement ranges relative humidity / temperature: 10 to 95% r.h. / 0 to 60  °C
- Resolution relative humidity / temperature: 1% r.h. / 1 °C
- Accuracy relative humidity / temperature: ±2% r.h. / 1 °C
- Display: 100 mm high LED (alternates values)
- Protection: IP 54

 

Manufacturer: PCE Instruments
Test Instruments manufacturer