Order no.: PCE-G1

Thermometer to relative humidity and temperature, visible from up to 50 m distance. The thermometer is composed of a 100 mm high LED and comes with IP54 rating. Celcius only temperature display.

- Measurement ranges relative humidity / temperature: 10 to 95% r.h. / 0 to 60  °C
- Resolution relative humidity / temperature: 1% r.h. / 1 °C
- Accuracy relative humidity / temperature: ±2% r.h. / 1 °C
- Display: 100 mm high LED (alternates values)
- Protection: IP 54

 

Manufacturer: PCE Instruments
£ 667.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-VT 3700-ICA
The accelerometer is ideal for maintenance workers to quickly check vibrating parts, machines and systems. This accelerometer shows the vibration acceleration, vibration velocity and vibration displacement directly on the display. The measurement unit can be switched between the metric system and imperial units.

Measuring ranges
- Acceleration: 0.0 - 399.9 m/s² / 0.0 - 15744 in/s²
- Velocity: 0.00 - 399.99 mm/s / 0.00 - 15.74 in/s
- Displacement: 0.000 - 3.9 mm / 0.000 - 0.154 in
- Automatic ISO 10816-3 evaluation
- Colored graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
£ 663.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-CT 80-ICA
The paint layer automotive tester PCE-CT 80-ICA is a measuring device for the nondestructive measurement of coatings (paints, lacquers, plastics ...) on steel / iron and non-ferrous metals. Includes FN1.5 probe in kit for 0 ... 1500 μm or 0 ... 59 mils measurements. Optional sensors and software available under accessories tab.

- Measuring range of meter is Fe: 0 ... 5000 μm (0 ... 196.9 mils) / NFe: 0 ... 3000 μm (0 ... 118.1 mils)
- For many substrate materials such as Iron, Steel, Aluminum, Copper, Brass and Stainless Steel.
- Practical V-groove on the measuring sensor heads
- Wear-resistant, spring-mounted measuring head for precise measurement results 
- Includes ISO laboratory calibration certificate
Manufacturer: PCE Instruments
£ 663.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-LOC 20
The calibrator PCE-LOC 20 can be used to directly simulate process currents in current loop, mV and mA. This allows the calibrator to be used to set process displays, data loggers, paperless recorders, etc. The calibrator PCE-LOC 20 can be purchased here in our online shop.

- Simultaneous simulation and measurement mode
- For mA, mV and V
- Graphic display
- Supply of sensors possible
- Manual mode & ramp function
- Continuity test
- Data logger function
Manufacturer: PCE Instruments
£ 663.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-RTD 20
The RTD calibrator PCE-RTD 20 is used to simulate resistors and resistance temperature sensors. Thus, the RTD calibrator is able to be used as a calibrator for temperature measuring devices. You can buy the RTD calibrator PCE-RTD 20 here in our online shop.

- Simulation and measurement mode
- Graphic LCD
- 24V supply for current loops
- HART compatible
- Manual mode & ramp function
- Continuity test
- Data logger function
Manufacturer: PCE Instruments
£ 663.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-CT 80-ICA
The paint layer coating thickness gauge PCE-CT 80-ICA is a measuring device for the nondestructive measurement of coatings (paints, lacquers, plastics ...) on steel / iron and non-ferrous metals. Includes FN1.5 probe in kit for 0 ... 1500 μm or 0 ... 59 mils measurements. Optional sensors and software available under accessories tab.

- Measuring range of meter is Fe: 0 ... 5000 μm (0 ... 196.9 mils) / NFe: 0 ... 3000 μm (0 ... 118.1 mils)
- For many substrate materials such as Iron, Steel, Aluminum, Copper, Brass and Stainless Steel.
- Practical V-groove on the measuring sensor heads
- Wear-resistant, spring-mounted measuring head for precise measurement results
- Includes ISO laboratory calibration certificate
Manufacturer: PCE Instruments
£ 663.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-VT 3700-ICA
The condition monitoring vibration meter is ideal for maintenance workers to quickly check vibrating parts, machines and systems. This condition monitoring vibration meter shows the vibration acceleration, vibration velocity and vibration displacement directly on the display. The measurement unit can be switched between the metric system and imperial units.

Measuring ranges
- Acceleration: 0.0 - 399.9 m/s² / 0.0 - 15744 in/s²
- Velocity: 0.00 - 399.99 mm/s / 0.00 - 15.74 in/s
- Displacement: 0.000 - 3.9 mm / 0.000 - 0.154 in
- Automatic ISO 10816-3 evaluation
- Colored graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
£ 663.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-LOC 20
The current calibrator PCE-LOC 20 can be used to directly simulate process currents in current loop, mV and mA. This allows the current calibrator to be used to set process displays, data loggers, paperless recorders, etc. The current calibrator PCE-LOC 20 can be purchased here in our online shop.

- Simultaneous simulation and measurement mode
- For mA, mV and V
- Graphic display
- Supply of sensors possible
- Manual mode & ramp function
- Continuity test
- Data logger function
Manufacturer: PCE Instruments
£ 663.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-RTD 20
The RTD current calibrator PCE-RTD 20 is used to simulate resistors and resistance temperature sensors. Thus, the RTD current calibrator is able to be used as a calibrator for temperature measuring devices. You can buy the RTD current calibrator PCE-RTD 20 here in our online shop.

- Simulation and measurement mode
- Graphic LCD
- 24V supply for current loops
- HART compatible
- Manual mode & ramp function
- Continuity test
- Data logger function
Manufacturer: PCE Instruments
£ 663.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-LOC 20
The current/voltage data logger PCE-LOC 20 can be used to directly simulate process currents in current loop, mV and mA. This allows the current/voltage data logger to be used to set process displays, data loggers, paperless recorders, etc.

- Simultaneous simulation and measurement mode
- For mA, mV and V
- Graphic display
- Supply of sensors possible
- Manual mode & ramp function
- Continuity test
- Data logger function
Manufacturer: PCE Instruments
£ 663.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-BPH 20-ICA
The table-top environmental meter can be used to quickly and precisely analyze liquid samples. Thus, for example, water, alkalis, milk, wine and many other liquids can be checked for their quality with the environmental meter.

Measuring range:
- pH, mV, TDS
- Temperature, conductivity
- Salinity, resistance
- Large 7" touchscreen
- Bluetooth and USB interfaces
- 3 point calibration
- incl. ISO Calibration Certificate (for PH value only)
Manufacturer: PCE Instruments
£ 663.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-BPH 20-ICA
The table-top environmental tester can be used to quickly and precisely analyze liquid samples. Thus, for example, water, alkalis, milk, wine and many other liquids can be checked for their quality with the environmental tester.

Measuring range:
- pH, mV, TDS
- Temperature, conductivity
- Salinity, resistance
- Large 7" touchscreen
- Bluetooth and USB interfaces
- 3 point calibration
- incl. ISO Calibration Certificate (for PH value only)
Manufacturer: PCE Instruments
£ 663.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-VT 3700-ICA
The HVAC meter is ideal for maintenance workers to quickly check vibrating parts, machines and systems. This HVAC meter shows the vibration acceleration, vibration velocity and vibration displacement directly on the display. The measurement unit can be switched between the metric system and imperial units.

Measuring ranges
- Acceleration: 0.0 - 399.9 m/s² / 0.0 - 15744 in/s²
- Velocity: 0.00 - 399.99 mm/s / 0.00 - 15.74 in/s
- Displacement: 0.000 - 3.9 mm / 0.000 - 0.154 in
- Automatic ISO 10816-3 evaluation
- Colored graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
£ 663.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-IT414

Insulation Meter for high tension up to 10,000 volts.


- For professionals
- 6 digit LCD
- Measurements according to VDE 0413 part 1
- Test tension up to 10,000V

 

Manufacturer: PCE Instruments
£ 663.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-CT 80-ICA
The paint layer material tester PCE-CT 80-ICA is a measuring device for the nondestructive measurement of coatings (paints, lacquers, plastics ...) on steel / iron and non-ferrous metals. Includes FN1.5 probe in kit for 0 ... 1500 μm or 0 ... 59 mils measurements. Optional sensors and sensors available under accessories tab.

- Measuring range of meter is Fe: 0 ... 5000 μm (0 ... 196.9 mils) / NFe: 0 ... 3000 μm (0 ... 118.1 mils)
- For many substrate materials such as Iron, Steel, Aluminum, Copper, Brass and Stainless Steel.
- Practical V-groove on the measuring sensor heads
- Wear-resistant, spring-mounted measuring head for precise measurement results 
- Includes ISO laboratory calibration certificate
Manufacturer: PCE Instruments
£ 663.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-BPH 20-ICA
The table-top multifunction conductivity meter can be used to quickly and precisely analyze liquid samples. Thus, for example, water, alkalis, milk, wine and many other liquids can be checked for their quality with the conductivity meter.

Measuring range:
- pH, mV, TDS
- Temperature, conductivity
- Salinity, resistance
- Large 7" touchscreen
- Bluetooth and USB interfaces
- 3 point calibration
- incl. ISO Calibration Certificate (for PH value only)
Manufacturer: PCE Instruments
£ 663.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-CT 80-ICA
The paint layer paint gauge PCE-CT 80-ICA is a measuring device for the nondestructive measurement of coatings (paints, lacquers, plastics ...) on steel / iron and non-ferrous metals. Includes FN1.5 probe in kit for 0 ... 1500 μm or 0 ... 59 mils measurements. Optional sensors and software available under accessories tab.

- Measuring range of meter is Fe: 0 ... 5000 μm (0 ... 196.9 mils) / NFe: 0 ... 3000 μm (0 ... 118.1 mils)
- For many substrate materials such as Iron, Steel, Aluminum, Copper, Brass and Stainless Steel
- Practical V-groove on the measuring sensor heads
- Wear-resistant, spring-mounted measuring head for precise measurement results
- Incl. ISO laboratory calibration certificate
Manufacturer: PCE Instruments
£ 663.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-CT 80-ICA
The paint layer thickness gauge PCE-CT 80-ICA is a measuring device for the nondestructive measurement of coatings (paints, lacquers, plastics ...) on steel / iron and non-ferrous metals. Includes FN1.5 probe in kit for 0 ... 1500 μm or 0 ... 59 mils measurements. Optional sensors and software available under accessories tab.

- Measuring range of meter is Fe: 0 ... 5000 μm (0 ... 196.9 mils) / NFe: 0 ... 3000 μm (0 ... 118.1 mils)
- For many substrate materials such as Iron, Steel, Aluminum, Copper, Brass and Stainless Steel.
- Practical V-groove on the measuring sensor heads
- Wear-resistant, spring-mounted measuring head for precise measurement results 
- Includes ISO laboratory calibration certificate
Manufacturer: PCE Instruments
£ 663.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-LOC 20
The process calibrator PCE-LOC 20 can be used to directly simulate process currents in current loop, mV and mA. This allows the process calibrator to be used to set process displays, data loggers, paperless recorders, etc.

- Simultaneous simulation and measurement mode
- For mA, mV and V
- Graphic display
- Supply of sensors possible
- Manual mode & ramp function
- Continuity test
- Data logger function
Manufacturer: PCE Instruments
£ 663.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-RTD 20
The RTD process calibrator PCE-RTD 20 is used to simulate resistors and resistance temperature sensors. Thus, the RTD process calibrator is able to be used as a calibrator for temperature measuring devices. You can buy the RTD process calibrator PCE-RTD 20 here in our online shop.

- Simulation and measurement mode
- Graphic LCD
- 24V supply for current loops
- HART compatible
- Manual mode & ramp function
- Continuity test
- Data logger function
Manufacturer: PCE Instruments
£ 663.00

Price excl. VAT &. delivery
2 year Warranty