Order no.: PCE-GPA 50-ICA
The PCE-GPA 50 digital multimeter is used to measure the current of 1- or 3-phase loads. This digital multimeter is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the digital multimeter.
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- Harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 619.00
Price excl. VAT &. delivery
2 year Warranty
Order no.: PCE-GPA 50-ICA
The PCE-GPA 50 electrical tester is used to measure the current of 1- or 3-phase loads. This electrical tester is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the electrical tester.
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- Harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 619.00
Price excl. VAT &. delivery
2 year Warranty
Order no.: PCE-GPA 50-ICA
The PCE-GPA 50 HVAC meter is used to measure the current of 1- or 3-phase loads. This HVAC meter is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the HVAC meter.
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- Harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 619.00
Price excl. VAT &. delivery
2 year Warranty
Order no.: PCE-GPA 50-ICA
The PCE-GPA 50 1-phase power meter is used to measure the current of 1- or 3-phase loads. This 1-phase power meter is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the power meter.
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- Harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 619.00
Price excl. VAT &. delivery
2 year Warranty
Order no.: PCE-GPA 50-ICA
The PCE-GPA 50 power analyzer is used to measure the current of 1- or 3-phase loads. This power analyzer is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the power analyzer.
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- Harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 619.00
Price excl. VAT &. delivery
2 year Warranty
Order no.: PCE-GPA 50-ICA
The PCE-GPA 50 power meter is used to measure the current of 1- or 3-phase loads. This power meter is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the power meter.
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- Harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 619.00
Price excl. VAT &. delivery
2 year Warranty
Order no.: PCE-GPA 50-ICA
The 3-phase power meter / 3-phase power analyzer is used to measure the current of 1- or 3-phase loads. This 3-phase power meter / 3-phase power analyzer is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the power meter.
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- Harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 619.00
Price excl. VAT &. delivery
2 year Warranty
Order no.: PCE-GPA 50-ICA
The PCE-GPA 50 voltmeter is used to measure the current of 1- or 3-phase loads. This voltmeter is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the voltmeter.
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- Harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 619.00
Price excl. VAT &. delivery
2 year Warranty
Order no.: PCE-AQS 2.5
The air quality meter is the ideal sensor for monitoring the fine dust content of the outside air. The air quality meter reliably measures the mass concentration of fine dust of size PM 2.5 up to the measuring range end value of 999.9 µg/m³.
- Measuring range: 0.0 ... 999.9 µg/m3
- Resolution: 0.1 µg/m3
- Particle size: PM 2.5
- Smallest detectable particle: 0.3 µm
- Fixed power supply of 12 V DC
- Output signal: Modbus-RTU RS485
- Measuring range: 0.0 ... 999.9 µg/m3
- Resolution: 0.1 µg/m3
- Particle size: PM 2.5
- Smallest detectable particle: 0.3 µm
- Fixed power supply of 12 V DC
- Output signal: Modbus-RTU RS485
Manufacturer: PCE Instruments
£ 618.00
Price excl. VAT &. delivery
2 year Warranty
Order no.: PCE-AQS 2.5
The air quality station is the ideal sensor for monitoring the fine dust content of the outside air. The air quality station reliably measures the mass concentration of fine dust of size PM 2.5 up to the measuring range end value of 999.9 µg/m³.
- Measuring range: 0.0 ... 999.9 µg/m3
- Resolution: 0.1 µg/m3
- Particle size: PM 2.5
- Smallest detectable particle: 0.3 µm
- Fixed power supply of 12 V DC
- Output signal: Modbus-RTU RS485
- Measuring range: 0.0 ... 999.9 µg/m3
- Resolution: 0.1 µg/m3
- Particle size: PM 2.5
- Smallest detectable particle: 0.3 µm
- Fixed power supply of 12 V DC
- Output signal: Modbus-RTU RS485
Manufacturer: PCE Instruments
£ 618.00
Price excl. VAT &. delivery
2 year Warranty
Order no.: PCE-BTM 2000-ICA
The condition monitoring / belt tension meter is an optical measuring instrument for determining the belt tension force. This force measuring device consists of a display unit and a sensor on a gooseneck cable. The condition monitoring meter measures the tension of the belt in a stationary state.
- Measures the oscillation frequency of the belt
- Measuring range: 10 ... 900 Hz
- Accuracy: ± (1% of rdg. + 4 digits)
- Resolution: <100 Hz: 0.1 Hz
>100 Hz: 1 Hz
- Memory for 750 measured values
- Sensor on gooseneck
- incl. ISO Calibration Certificate
- Measures the oscillation frequency of the belt
- Measuring range: 10 ... 900 Hz
- Accuracy: ± (1% of rdg. + 4 digits)
- Resolution: <100 Hz: 0.1 Hz
>100 Hz: 1 Hz
- Memory for 750 measured values
- Sensor on gooseneck
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 618.00
Price excl. VAT &. delivery
2 year Warranty
Order no.: PCE-NDL 10-ICA
The data-logging condition monitoring device is used to determine volume. The PCE-NDL 10 data-logging condition monitoring device is a handy measuring device that meets the highest requirements. In order to evaluate the measured data in the best possible way, it is possible to use the internal measurement data memory on the noise dosimeter. In addition, the data-logging condition monitoring device has an SD card slot that enables the use of an SD card as an additional storage medium.
- Measuring range: SPL: Auto 30 ... 130 dB
- Resolution: 0.1 dB
- Low sampling rate
- Automatic or manual storage
- Selectable storage interval
- Backlit LC display
- Dose measurement or SPL measurement
Manufacturer: PCE Instruments
£ 618.00
Price excl. VAT &. delivery
2 year Warranty
Order no.: PCE-NDL 10-ICA
The data-logging decibel meter is used to determine volume. The PCE-NDL 10 data-logging decibel meter is a handy measuring device that meets the highest requirements. In order to evaluate the measured data in the best possible way, it is possible to use the internal measurement data memory on the noise dosimeter. In addition, the data-logging decibel meter has an SD card slot that enables the use of an SD card as an additional storage medium.
- Measuring range: SPL: Auto 30 ... 130 dB
- Resolution: 0.1 dB
- Low sampling rate
- Automatic or manual storage
- Selectable storage interval
- Backlit LC display
- Dose measurement or SPL measurement
Manufacturer: PCE Instruments
£ 618.00
Price excl. VAT &. delivery
2 year Warranty
Order no.: PCE-NDL 10-ICA
The data-logging noise dose meter is used to determine volume. The PCE-NDL 10 data-logging noise dose meter is a handy measuring device that meets the highest requirements. In order to evaluate the measured data in the best possible way, it is possible to use the internal measurement data memory on the noise dosimeter. In addition, the data-logging noise dose meter has an SD card slot that enables the use of an SD card as an additional storage medium.
- Measuring range: SPL: Auto 30 ... 130 dB
- Resolution: 0.1 dB
- Low sampling rate
- Automatic or manual storage
- Selectable storage interval
- Backlit LC display
- Dose measurement or SPL measurement
Manufacturer: PCE Instruments
£ 618.00
Price excl. VAT &. delivery
2 year Warranty
Order no.: PCE-NDL 10-ICA
The data-logging noise meter / sound meter is used to determine volume. The PCE-NDL 10 data-logging noise meter / sound meter is a handy measuring device that meets the highest requirements. In order to evaluate the measured data in the best possible way, it is possible to use the internal measurement data memory on the noise dosimeter. In addition, the data-logging noise meter / sound meter has an SD card slot that enables the use of an SD card as an additional storage medium.
- Measuring range: SPL: Auto 30 ... 130 dB
- Resolution: 0.1 dB
- Low sampling rate
- Automatic or manual storage
- Selectable storage interval
- Backlit LC display
- Dose measurement or SPL measurement
Manufacturer: PCE Instruments
£ 618.00
Price excl. VAT &. delivery
2 year Warranty
Order no.: PCE-NDL 10-ICA
The data-logging sound level meter is used to determine volume. The PCE-NDL 10 data-logging sound level meter is a handy measuring device that meets the highest requirements. In order to evaluate the measured data in the best possible way, it is possible to use the internal measurement data memory on the noise dosimeter. In addition, the data-logging sound level meter has an SD card slot that enables the use of an SD card as an additional storage medium.
- Measuring range: SPL: Auto 30 ... 130 dB
- Resolution: 0.1 dB
- Low sampling rate
- Automatic or manual storage
- Selectable storage interval
- Backlit LC display
- Dose measurement or SPL measurement
Manufacturer: PCE Instruments
£ 618.00
Price excl. VAT &. delivery
2 year Warranty
Order no.: PCE-NDL 10-ICA
The dB data logger is used to determine volume. The PCE-NDL 10 dB data logger is a handy measuring device that meets the highest requirements. In order to evaluate the measured data in the best possible way, it is possible to use the internal measurement data memory on the noise dosimeter. In addition, the dB data logger has an SD card slot that enables the use of an SD card as an additional storage medium.
- Measuring range: SPL: Auto 30 ... 130 dB
- Resolution: 0.1 dB
- Low sampling rate
- Automatic or manual storage
- Selectable storage interval
- Backlit LC display
- Dose measurement or SPL measurement
Manufacturer: PCE Instruments
£ 618.00
Price excl. VAT &. delivery
2 year Warranty
Order no.: PCE-2500N-ICA
PCE-2500N-ICA is a portable handheld pen-sized digital material hardness tester, rebound hammer or durometer for use with metals. This high-accuracy hardness tester quickly and accurately measures the surface hardness of 10 common metal materials including steel, cast steel, alloy tool steel, stainless steel, cast iron, ductile iron, cast aluminum alloy, brass, bronze and copper.
- Measuring principle: Leeb Rebound method
- Displays measurements in Rockwell A, B or C (HRA, HRB or HRC), Brinell (HB), Vickers (HV), Shore (HS) or Leeb (HLD)
- Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS
- Accuracy: ± 0.5%; Repeatability: ± 0.8%
- Type D impact device
- Includes ISO calibration certificate
Manufacturer: PCE Instruments
£ 618.00
Price excl. VAT &. delivery
2 year Warranty
Order no.: PCE-AQS 2.5
The dust measuring device is the ideal sensor for monitoring the fine dust content of the outside air. The dust measuring device reliably measures the mass concentration of fine dust of size PM 2.5 up to the measuring range end value of 999.9 µg/m³.
- Measuring range: 0.0 ... 999.9 µg/m3
- Resolution: 0.1 µg/m3
- Particle size: PM 2.5
- Smallest detectable particle: 0.3 µm
- Fixed power supply of 12 V DC
- Output signal: Modbus-RTU RS485
- Measuring range: 0.0 ... 999.9 µg/m3
- Resolution: 0.1 µg/m3
- Particle size: PM 2.5
- Smallest detectable particle: 0.3 µm
- Fixed power supply of 12 V DC
- Output signal: Modbus-RTU RS485
Manufacturer: PCE Instruments
£ 618.00
Price excl. VAT &. delivery
2 year Warranty
Order no.: PCE-AQS 2.5
The environmental meter is the ideal sensor for monitoring the fine dust content of the outside air. The environmental meter reliably measures the mass concentration of fine dust of size PM 2.5 up to the measuring range end value of 999.9 µg/m³.
- Measuring range: 0.0 ... 999.9 µg/m3
- Resolution: 0.1 µg/m3
- Particle size: PM 2.5
- Smallest detectable particle: 0.3 µm
- Fixed power supply of 12 V DC
- Output signal: Modbus-RTU RS485
- Measuring range: 0.0 ... 999.9 µg/m3
- Resolution: 0.1 µg/m3
- Particle size: PM 2.5
- Smallest detectable particle: 0.3 µm
- Fixed power supply of 12 V DC
- Output signal: Modbus-RTU RS485
Manufacturer: PCE Instruments
£ 618.00
Price excl. VAT &. delivery
2 year Warranty