PCE-0100 is a handheld refractometer used to determine the salt content or % salinity ppt and salinity SG (specific gravity) of salt water, sea water and other solutions containing a concentration of salt. This portable pocket salinity refractometer has a double scale to allow the user to view both measurement parameters at once.

Measurement range:
  0 ... 100% salinity ppt, 1.000 ... 1.070 salinity SG
- Resolution: 1 % or 0.001
- Accuracy: ±0.1 %
 

PCE-0100 is a handheld refractometer used to determine the salt content or % salinity ppt and salinity SG (specific gravity) of salt water, sea water and other solutions containing a concentration of salt. This portable pocket salinity refractometer has a double scale to allow the user to view both measurement parameters at once.

- Measurement range: 0 ... 100% salinity ppt, 1.000 ... 1.070 salinity SG
- Resolution: 1 % or 0.001
- Accuracy: ±0.1 %

 

The WTR 270 temperature sensor for food industry is distinguished by its robust design (stainless steel or PTFE ). The WTR 270 temperature sensor for food industry is available in different lengths, so the device will be a great help for health inspectors.

- Different sensor lengths
- Stainless steel or PTFE versions
- Pt100 Class A

 

The Frequency Indicator PCE-N25S is used for processing standardised signals. Depending on your specific needs, the frequency indicator can be ordered with different inputs, such as 0...20 mA, 4...20 mA, 0...60 mV, 0...10 V, ±60 mV or ±10 V. The input signal of the frequency indicator is freely scalable, which increases its application possibilities.

The Panel Indicator PCE-N25S is used for processing standardised signals. Depending on your specific needs, the panel indicator can be ordered with different inputs, such as 0...20 mA, 4...20 mA, 0...60 mV, 0...10 V, ±60 mV or ±10 V. The input signal of the panel indicator is freely scalable, which increases its application possibilities.

The Power Indicator PCE-N25S is used for processing standardised signals. Depending on your specific needs, the power indicator can be ordered with different inputs, such as 0...20 mA, 4...20 mA, 0...60 mV, 0...10 V, ±60 mV or ±10 V. The input signal of the power indicator is freely scalable, which increases its application possibilities.

The Pressure Indicator PCE-N25S is used for processing standardised signals. Depending on your specific needs, the pressure indicator can be ordered with different inputs, such as 0...20 mA, 4...20 mA, 0...60 mV, 0...10 V, ±60 mV or ±10 V. The input signal of the pressure indicator is freely scalable, which increases its application possibilities.

The Process Indicator PCE-N25S is used for processing standardised signals. Depending on your specific needs, the process indicator can be ordered with different inputs, such as 0...20 mA, 4...20 mA, 0...60 mV, 0...10 V, ±60 mV or ±10 V. The input signal of the process indicator is freely scalable, which increases its application possibilities.

The digital temperature indicator PCE-N25T is used for processing signals coming from temperature sensors. Depending on your specific needs, the digital indicator can be ordered with different inputs for thermocouples (type J, K) or resistance thermometers (Pt100). The input signal of the digital indicator is freely scalable, which increases its application possibilities.

- IP65 protected front
- For thermocouples and resistance thermometers
- Configuration via software
- 5-digit LED display

The digital indicator PCE-N25T is used for processing signals coming from temperature sensors. Depending on your specific needs, the digital indicator can be ordered with different inputs for thermocouples (type J, K) or resistance thermometers (Pt100). The input signal of the digital indicator is freely scalable, which increases its application possibilities.

- IP65 protected front
- For thermocouples and resistance thermometers
- Configuration via software
- 5-digit LED display

 

The Voltage Indicator PCE-N25S is used for processing standardised signals. Depending on your specific needs, the voltage indicator can be ordered with different inputs, such as 0...20 mA, 4...20 mA, 0...60 mV, 0...10 V, ±60 mV or ±10 V. The input signal of the voltage indicator is freely scalable, which increases its application possibilities.

The clamp-on ammeter PCE-HDC 10 can measure currents, voltages and resistances. Furthermore the clamp-on ammeter has got a continuity tester, and a diode tester. The 4-digit backlit display gives the possibility to read the measured value on the clip-on ammeter in the darkness. Another feature of this device is a peak / Max or Hold function.

- Currents up to 400 A AC
- Voltages up to 600 V AC / DC
- Auto-Range
- Max- Hold function

The clamp-on digital multimeter PCE-HDC 10 can measure currents, voltages and resistances. Furthermore the clamp-on digital multimeter has got a continuity tester, and a diode tester. The 4-digit backlit display gives the possibility to read the measured value on the clip-on digital multimeter in the darkness. Another feature of this device is a peak / Max or Hold function.

- Currents up to 400 A AC
- Voltages up to 600 V AC / DC
- Auto-Range
- Max- Hold function

This accessory is a switching output module. The accessory is used to drive an external relay.

Measurement function:
- AC
- DC
- DC voltage
- AC voltage
- LowZ AC / DC
- Resistance
- Continuity test
- Diode test
- Capacities
- Temperature (type K)
- Frequency (with the current clamp)
- Frequency (during voltage measurement)
- frequency (direct measurement)
- Duty cycle

Measurement function:
- AC
- DC
- DC voltage
- AC voltage
- LowZ AC / DC
- Resistance
- Continuity test
- Diode test
- Capacities
- Temperature (type K)
- Frequency (with the current clamp)
- Frequency (during voltage measurement)
- frequency (direct measurement)
- Duty cycle

Measurement function:
- AC
- DC
- DC voltage
- AC voltage
- LowZ AC / DC
- Resistance
- Continuity test
- Diode test
- Capacities
- Temperature (type K)
- Frequency (with the current clamp)
- Frequency (during voltage measurement)
- frequency (direct measurement)
- Duty cycle

Measurement function:
- AC
- DC
- DC voltage
- AC voltage
- LowZ AC / DC
- Resistance
- Continuity test
- Diode test
- Capacities
- Temperature (type K)
- Frequency (with the current clamp)
- Frequency (during voltage measurement)
- frequency (direct measurement)
- Duty cycle

Measurement function:
- AC
- DC
- DC voltage
- AC voltage
- LowZ AC / DC
- Resistance
- Continuity test
- Diode test
- Capacities
- Temperature (type K)
- Frequency (with the current clamp)
- Frequency (during voltage measurement)
- frequency (direct measurement)
- Duty cycle