Industrial Measurement Products and Solutions
Order no.: Gasman-O3

The Air Quality Meter Gasman-O3 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Air Quality Meter warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Air Quality Meter fulfills all the European and international norms, even ATEX and UL standards.


- For O3 (Ozone)
- Dust and water resistant - IP 65/67
- 0 ... 1 ppm
- Non-rechargeable, 1-year battery

 

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: Gasman-NH3

The Gas Detector Gasman-NH3 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Gas Detector warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Gas Detector fulfills all the European and international norms, even ATEX and UL standards.


- Non-rechargeable, 1-year battery
- For NH3 (Ammonia Gas)
- Dust and water resistant - IP 65/67
- 0 ... 100 ppm

 

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: Gasman-O3

The Gas Detector Gasman-O3 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Gas Detector warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Gas Detector fulfills all the European and international norms, even ATEX and UL standards.


- For O3 (Ozone)
- Dust and water resistant - IP 65/67
- 0 ... 1 ppm
- Non-rechargeable, 1-year battery 

 

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: Gasman-NH3

The Gas Leak Detector Gasman-NH3 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Gas Leak Detector warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Gas Leak Detector fulfills all the European and international norms, even ATEX and UL standards.


- Non-rechargeable, 1-year battery
- For NH3 (Ammonia Gas)
- Dust and water resistant - IP 65/67
- 0 ... 100 ppm

 

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: Gasman-O3

The Gas Leak Detector Gasman-O3 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Gas Leak Detector warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement.


- For O3 (Ozone)
- Dust and water resistant - IP 65/67
- 0 ... 1 ppm
- Non-rechargeable, 1-year battery

 

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: PCE-950

PCE-950 is a handheld material hardness tester used to determine the hardness of 10 different types of metal (i.e., cast steel, hammered steel, cold-rolled steel, stainless steel, cast iron, ductile iron, aluminum alloy, brass, bronze and forged copper alloy) according to the Leeb rebound method. In addition to Leeb hardness units, the metal hardness tester displays hardness measurements in Rockwell C, Rockwell B, Rockwell A, Brinell, Vickers and Shore hardness units.

- Measurement ranges: 19.8 ... 68.5 HRC, 13.5 ... 101.7 HRB, 59.1 ... 85.8 HRA, 
   19 ... 655 HB, 80 ... 976 HV, 32.2 ... 115 HS 
- Hardness units: HL, HRC, HRB, HRA, HB, HV, HS
- Accuracy: ±6 HL at HL = 790
- Impact device: Type D (integrated)
- Maximum hardness: 976 HV
- For use with hammered steel, cold-rolled steel, stainless steel, cast iron, ductile iron, aluminum alloy, brass, bronze and forged copper alloy metals

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-950

PCE-950 is a handheld metal hardness durometer used to determine the hardness of 10 different types of metal (i.e., cast steel, hammered steel, cold-rolled steel, stainless steel, cast iron, ductile iron, aluminum alloy, brass, bronze and forged copper alloy) according to the Leeb rebound method. In addition to Leeb hardness units, the metal hardness tester displays hardness measurements in Rockwell C, Rockwell B, Rockwell A, Brinell, Vickers and Shore hardness units.

- Measurement ranges: 19.8 ... 68.5 HRC, 13.5 ... 101.7 HRB, 59.1 ... 85.8 HRA, 
   19 ... 655 HB, 80 ... 976 HV, 32.2 ... 115 HS 
- Hardness units: HL, HRC, HRB, HRA, HB, HV, HS
- Accuracy: ±6 HL at HL = 790
- Impact device: Type D (integrated)
- Maximum hardness: 976 HV
- For use with hammered steel, cold-rolled steel, stainless steel, cast iron, ductile iron, aluminum alloy, brass, bronze and forged copper alloy metals

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-950

PCE-950 is a handheld metal hardness tester used to determine the hardness of 10 different types of metal (i.e., cast steel, hammered steel, cold-rolled steel, stainless steel, cast iron, ductile iron, aluminum alloy, brass, bronze and forged copper alloy) according to the Leeb rebound method. In addition to Leeb hardness units, the metal hardness tester displays hardness measurements in Rockwell C, Rockwell B, Rockwell A, Brinell, Vickers and Shore hardness units.

- Measurement ranges: 19.8 ... 68.5 HRC, 13.5 ... 101.7 HRB, 59.1 ... 85.8 HRA, 
   19 ... 655 HB, 80 ... 976 HV, 32.2 ... 115 HS 
- Hardness units: HL, HRC, HRB, HRA, HB, HV, HS
- Accuracy: ±6 HL at HL = 790
- Impact device: Type D (integrated)
- Maximum hardness: 976 HV
- For use with hammered steel, cold-rolled steel, stainless steel, cast iron, ductile iron, aluminum alloy, brass, bronze and forged copper alloy metals

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: Gasman-O3

The Ozone Meter Gasman-O3 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Ozone Meter warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Ozone Meter fulfills all the European and international norms, even ATEX and UL standards.


- For O3 (Ozone)
- Dust and water resistant - IP 65/67
- 0 ... 1 ppm
- Non-rechargeable, 1-year battery 

 

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: PCE-VMS 100
This PCE-VMS 100 vibration analyzer is a simple construction device for vibration control in machines and installations. This device detects vibrations caused by balance mismatches, defective adjustments, loose parts, defects in rollers or gears. When the threshold set in the device is reached or exceeded, an alarm is sent or the machine is turned off. 

- Digital indicator and vibration sensor for predictive maintenance
- PCE-DPD-U: Universal power supply 18… 265V AC (50 / 60Hz) / DC; 14 mm red 4-digit LED display
- PCE-AC420-210 sensor: Measuring range 0.2 ... 20 mm / s; Linear frequency range (± 3 dB) 10 ... 1000 Hz; Degree of protection IP67
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VMS 100
This PCE-VMS 100 vibration meter is a simple construction device for vibration control in machines and installations. This device detects vibrations caused by balance mismatches, defective adjustments, loose parts, defects in rollers or gears. When the threshold set in the device is reached or exceeded, an alarm is sent or the machine is turned off. 

- Digital indicator and vibration sensor for predictive maintenance
- PCE-DPD-U: Universal power supply 18… 265V AC (50 / 60Hz) / DC; 14 mm red 4-digit LED display
- PCE-AC420-210 sensor: Measuring range 0.2 ... 20 mm / s; Linear frequency range (± 3 dB) 10 ... 1000 Hz; Degree of protection IP67
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VMS 100
This PCE-VMS 100 vibration sensor is a simple construction device for vibration control in machines and installations. This device detects vibrations caused by balance mismatches, defective adjustments, loose parts, defects in rollers or gears. When the threshold set in the device is reached or exceeded, an alarm is sent or the machine is turned off. 

- Digital indicator and vibration sensor for predictive maintenance
- PCE-DPD-U: Universal power supply 18… 265V AC (50 / 60Hz) / DC; 14 mm red 4-digit LED display
- PCE-AC420-210 sensor: Measuring range 0.2 ... 20 mm / s; Linear frequency range (± 3 dB) 10 ... 1000 Hz; Degree of protection IP67
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-GM 55-ICA
The Gloss Meter PCE-GM 55 is a 3-angle glossmeter. The measuring angles of the gloss meter are 20°, 45° and 75°. This allows the gloss meter to be used for gloss measurements in the high gloss and medium gloss ranges. The special measuring angle of 75° allows, among other things, measurements of the degree of gloss on paper and textiles.

- Range : 0 ... 200 gloss units / highlights
- Accuracy: ± 1 gloss units
- Repeatability: ± 0.5 gloss units
- Optical angle: 20°, 45°, 75°
- For medium and high gloss
- Measurements on textiles and paper possible
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-GM 55-ICA
The NDT tester PCE-GM 55 is a 3-angle glossmeter. The measuring angles of the NDT tester are 20°, 45° and 75°. This allows the NDT tester to be used for gloss measurements in the high gloss and medium gloss ranges. The special measuring angle of 75° allows, among other things, measurements of the degree of gloss on paper and textiles.

- Range : 0 ... 200 gloss units / highlights
- Accuracy: ± 1 gloss units
- Repeatability: ± 0.5 gloss units
- Optical angle: 20°, 45°, 75°
- For medium and high gloss
- Measurements on textiles and paper possible
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-GM 55-ICA
The Gloss Meter PCE-GM 55 is a 3-angle glossmeter. The measuring angles of the gloss meter are 20°, 45° and 75°. This allows the gloss meter to be used for gloss measurements in the high gloss and medium gloss ranges. The special measuring angle of 75° allows, among other things, measurements of the degree of gloss on paper and textiles.

- Range : 0 ... 200 gloss units / highlights
- Accuracy: ± 1 gloss units
- Repeatability: ± 0.5 gloss units
- Optical angle: 20°, 45°, 75°
- For medium and high gloss
- Measurements on textiles and paper possible
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MCWNT9

The PCE-MCWNT9 is a verifiable Crane Scale, available in three versions, weighing up to a maximum of 9000 kg. With compact dimensions, the Crane Scale is useful for many applications. The MCWNT9 is powered by 4 conventional AA batteries. The Crane Scale is delivered manufacturer calibrated, but can optionally be certified according to ISO standards.


- Maximum load: 9000 kg
- Resolution: 1 kg - 3000 kg / 2 kg - 6000 kg / 5 kg - 9000 kg
- Percentage weighing

 

Manufacturer: Dini Argeo GmbH
Test Instruments manufacturer
Order no.: PCE-MCWNT9

The PCE-MCWNT9 is a verifiable Force Gauge, available in three versions, weighing up to a maximum of 9000 kg. With compact dimensions, the Force Gauge is useful for many applications. The MCWNT9 is powered by 4 conventional AA batteries. The Force Gauge is delivered manufacturer calibrated, but can optionally be certified according to ISO standards.


- Maximum load: 9000 kg
- Resolution: 1 kg - 3000 kg / 2 kg - 6000 kg / 5 kg - 9000 kg
- Percentage weighing

Manufacturer: Dini Argeo GmbH
Test Instruments manufacturer
Order no.: PCE-MCWNT9

The PCE-MCWNT9 is a verifiable hanging scale, available in three versions, weighing up to a maximum of 9000 kg. With compact dimensions, the hanging scales are useful for many applications. The MCWNT9 is powered by 4 conventional AA batteries. The hanging scales are delivered manufacturer calibrated, but can optionally be certified according to ISO standards.


- Maximum load: 9000 kg
- Resolution: 1 kg - 3000 kg / 2 kg - 6000 kg / 5 kg - 9000 kg
- Percentage weighing

Manufacturer: Dini Argeo GmbH
Test Instruments manufacturer
Order no.: PCE-DMM 60

The manometer PCE-DMM 60 is a precision instrument of the highest standards. The manometer is specifically designed for process monitoring and calibration. This manometer is distinguished by its modular concept. This means that the actual sensor and the display can be separated. The pressure transmitter can be selected on site for different measuring ranges and connected to the display without tools.


- Max. 400 bar / 5801 psi
- Media: water, gases
- Pressure type: Absolute / Relative
- Diaphragm: stainless steel
- Accuracy: 0.05

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DMM 70

The manometer PCE-DMM 70 is a precision instrument for leakage testing. The manometer is specifically designed for leak testing of pipe networks. The actual manometer and the display of this precision instrument can be separated without tools. The measurement values are stored in the internal memory.


- Max. 400 bar / 5801 psi
- For leakage testing
- Media: water, gases
- Pressure type: Absolute / Relative
- Membrane: Stainless Steel
- Accuracy class: 0.05

Manufacturer: PCE Instruments
Test Instruments manufacturer