- For 12V starter batteries
- Cold start current CCA:  100 ... 1700 A
- Battery capacity:  30 Ah ... 100 Ah
- Battery standards:  DIN, JIS, EN, IEC, SAE, GB & MCA

PCE-SG is an automotive tester or handheld refractometer used to determine the specific gravity (sg) of electrolyte solution batteries as well as the freezing point of propylene or ethylene glycol-based coolants in degrees Celsius (°C). This refractometer works well for measuring cleaning products too. The instrument also gives indication of the charge level in battery acid.

Measurement ranges:
   -50 ... 0 °C for coolant or antifreeze
   1.15 ... 1.30 sg for battery acid
   -40 ... 0 °C for cleaner

- For 12V starter batteries
- Cold start current CCA:  100 ... 1700 A
- Battery capacity:  30 Ah ... 100 Ah
- Battery standards:  DIN, JIS, EN, IEC, SAE, GB & MCA

Clamp on Tester for measuring AC current, AC voltage, DC current and frequency. The reduced dimensions of this device allow for measurements to be taken in places with limited access. The backlight display ensures that it is easy to read, even in places with limited light available, such as electrical cabinets or in cabling ducts. The Clamp on Tester (as all the test instruments) comes manufacturer calibrated - ISO certification is available as an option.

- AC current (50/60 Hz): 200 A / 0.1 A or 100-mA / ±3.0% + 8 digits
- DC current: 200 A / 100-mA / ±2.8% + 8 digits
- AC test voltage (without contact):100 VAC to 600 VAC at 50 /
  60 Hz
- Frequency (3 ranges): 40 to 50 Hz / 51 to 510 Hz / 0.51 to 1 kHz

This Condition Monitoring Phase Rotation Meter PCE-PI1 has a robust housing with a large LCD display so you can easily and conveniently determine the phase and motor rotation direction. Furthermore, any problems in individual phases, are displayed on the phase rotation meter. The condition monitoring phase rotation meter meets the safety standard CAT III 600 V, IEC 61010.

- Easy operation
- No batteries required
- Robust alligator clips for easy connection
- 3-phase measurements of 40 ... 690 V AC
- Protection class IP 40

The PCE-DC1 Current Clamp has been designed to detect, indirectly, AC/DC current and frequency. The Current Clamp has a flashlight integrated to allow for the point of measurement to be illuminated, and a function to test the voltage without contact.

- AC current (50/60 Hz): 200 A / 100-mA / ±3.0% + 8 digits
- DC current:200 A / 0.1 A or 100-mA / ±2.8% + 8 digits
- AC test voltage (without contact):100 VAC to 600 VAC 50 /
  60 Hz
- Frequency: 40 to 50 Hz / 51 to 510 Hz/ 0.51 to 1 kHz

- For 12V starter batteries
- Cold start current CCA:  100 ... 1700 A
- Battery capacity:  30 Ah ... 100 Ah
- Battery standards:  DIN, JIS, EN, IEC, SAE, GB & MCA

The PCE-DC1 Electrical tester has been designed to detect, indirectly, AC/DC current and frequency. The Electrical tester has a flashlight integrated to allow for the point of measurement to be illuminated, and a function to test the voltage without contact.

- AC current (50/60 Hz): 200 A / 0.1 A or 100-mA / ±3.0% + 8 digits
- DC current: 200 A / 0.1 A or 100-mA / ±2.8% + 8 digits
- AC test voltage (without contact):100 VAC to 600 VAC 50 / 60 Hz
- Frequency (3 ranges): 40 to 50 Hz / 51 to 510 Hz/ 0.51 to 1 kHz