Industrial Measurement Products and Solutions
Order no.: Gasman-CO2-A

The Air Quality Meter Gasman-CO2 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Air Quality Meter warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Air Quality Meter fulfills all the European and international norms, even ATEX and UL standards.


- Non-rechargeable, 1-year battery
- For CO2 (Carbon Dioxide)
- Dust and water resistant - IP 65/67
- 0... 5% v/v

 

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: Gasman-CO2-A

The Carbon Dioxide Meter Gasman-CO2 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Carbon Dioxide Meter warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Carbon Dioxide Meter fulfills all the European and international norms, even ATEX and UL standards.


- Non-rechargeable, 1-year battery
- For CO2 (Carbon Dioxide)
- Dust and water resistant - IP 65/67
- 0... 5 % v/v

 

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: Gasman-CO2-A

The CO2 Analyzer Gasman-CO2 is a unique gas meter which protects against a specific gas, inflammable or toxic. The CO2 Analyzer warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The CO2 Analyzer fulfills all the European and international norms, even ATEX and UL standards.


- Non-rechargeable, 1-year battery
- For CO2 (Carbon Dioxide)
- Dust and water resistant - IP 65/67
- 0... 5 % v/v

 

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: AQ-300

Gas Detector AQ-300 is a highly accurate instrument for measuring ozone concentrations in the air. The Gas Detector can be equipped with four different heads that vary in their measurement range.


- High accuracy and functionality
- Battery operation
- Alarm function

 

Attention! No sensor head is included in the delivery, it must be ordered separately as an accessory!

 

Manufacturer: Aeroqual
Test Instruments manufacturer
Order no.: Gasman-CO2-A

The Gas Detector Gasman-CO2 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Gas Detector warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Gas Detector fulfills all the European and international norms, even ATEX and UL standards.


- Non-rechargeable, 1-year battery
- For CO2 (Carbon Dioxide)
- Dust and water resistant - IP 65/67
- 0... 5 % v/v

 

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: Gasman-CO2-A

The Gas Leak Detector Gasman-CO2 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Gas Leak Detector warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Gas Leak Detector fulfills all the European and international norms, even ATEX and UL standards.


- Non-rechargeable, 1-year battery
- For CO2 (Carbon Dioxide)
- Dust and water resistant - IP 65/67
- 0... 5 % v/v

 

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: AQ-300

Ozone Meter AQ-300 is a highly accurate instrument for measuring ozone concentrations in the air. The Ozone Meter can be equipped with four different heads that vary in their measurement range.


- High accuracy and functionality
- Battery operation
- Alarm function

 

Attention! No sensor head is included in the delivery, it must be ordered separately as an accessory!

 

Manufacturer: Aeroqual
Test Instruments manufacturer
Order no.: PCE-MPC 30
This Air Quality Meter has many functions. With the Air Quality Meter it is possible to determine the number of particles in the size of 0.3, 2.5 and 10 µm.

- Measurable particle sizes:  PM 2.5 and PM 10
- Measuring range: 0 ... 2000 µg / m³
- Resolution: 1 µg / m³
- Particle counter, HCHO, temperature measurement
- Dew point and wet bulb temperature
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MPC 30
This Air Sampling Device has many functions. With the Air Sampling Device it is possible to determine the number of particles in the size of 0.3, 2.5 and 10 µm.

- Measurable particle sizes:  PM 2.5 and PM 10
- Measuring range: 0 ... 2000 µg / m³
- Resolution: 1 µg / m³
- Particle counter, HCHO, temperature measurement
- Dew point and wet bulb temperature
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-1000N

PCE-1000N is a portable handheld Barcol hardness tester used to measure the hardness of pure aluminum, soft aluminum, thick aluminum alloy and aluminum sheets, strips, rods, castings and forgings. The hardness of fiber-reinforced (FRP) plastics, glass-reinforced (GRP) plastics, hard plastics and soft metals (such as copper or lead) also can be tested using this battery-powered digital Barcol impressor hardness meter.


- Measurement parameters: Barcol (HBA), Brinell (HB), Vickers (HV), Webster
  (HW)
  Rockwell (HRB / HRE / HRF / HRH)
- Measuring range: 0 ... 100 HBA / 25 ... 150 HB
- Accuracy: 81 ... 88 HBA: ± 1 HBA / 42 ... 48 HBA: ± 2 HBA
- Repeatability: 81 ... 88 HBA: ± 1.5 HBA / 42 ... 48 HBA: ± 2.5 HBA
- Resolution: 0.1 HBA

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-1000N

PCE-1000N is a portable handheld Barcol hardness testing durometer used to measure the hardness of pure aluminum, soft aluminum, thick aluminum alloy and aluminum sheets, strips, rods, castings and forgings. The hardness of fiber-reinforced (FRP) plastics, glass-reinforced (GRP) plastics, hard plastics and soft metals (such as copper or lead) also can be tested using this battery-powered digital Barcol impressor hardness meter.


- Measurement parameters: Barcol (HBA), Brinell (HB), Vickers (HV), Webster
  (HW), Rockwell
  (HRB / HRE / HRF / HRH)
- Measuring range: 0 ... 100 HBA / 25 ... 150 HB
- Accuracy: 81 ... 88 HBA: ± 1 HBA / 42 ... 48 HBA: ± 2 HBA
- Repeatability: 81 ... 88 HBA: ± 1.5 HBA / 42 ... 48 HBA: ± 2.5 HBA
- Resolution: 0.1 HBA

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MPC 30
This Dust Measuring Device has many functions. With the Dust Measuring Device it is possible to determine the number of particles in the size of 0.3, 2.5 and 10 µm.

- Measurable particle sizes:  PM 2.5 and PM 10
- Measuring range: 0 ... 2000 µg / m³
- Resolution: 1 µg / m³
- Particle counter, HCHO, temperature measurement
- Dew point and wet bulb temperature
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DFG N 500

Dynamometer PCE-DFG N 500 for tensile force measurement and pressure force measurement up to 500 N. The PCE-DFG N 500 is a digital force gauge PCE-DFG N 500 for precise measurements with a resolution of 0.1 N.

- Measuring range: 0 ... 500 N, 0 ... 112 lbs
- Accuracy: ± 0.1% of the measuring range of N, kg, lb, KPa
- Memory for 100 measurements
- Pull and pressure force measurement
- 1600 Hz sampling rate
- Interface: USB
- 6 different measuring tips
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MPC 30
This Environmental Testing Device has many functions. With the Environmental Device it is possible to determine the number of particles in the size of 0.3, 2.5 and 10 µm.

- Measurable particle sizes:  PM 2.5 and PM 10
- Measuring range: 0 ... 2000 µg / m³
- Resolution: 1 µg / m³
- Particle counter, HCHO, temperature measurement
- Dew point and wet bulb temperature
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MPC 30
This Fine Dust Measuring Device has many functions. With the fine dust measuring device it is possible to determine the number of particles in the size of 0.3, 2.5 and 10 µm.

- Measurable particle sizes:  PM 2.5 and PM 10
- Measuring range: 0 ... 2000 µg / m³
- Resolution: 1 µg / m³
- Particle counter, HCHO, temperature measurement
- Dew point and wet bulb temperature
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DFG N 500

Digital force gauge PCE-DFG N 500 for tensile force measurement and pressure force measurement up to 500 N. The PCE-DFG N 500 is a digital force gauge PCE-DFG N 500 for precise measurements with a resolution of 0.1 N.

- Measuring range: 0 ... 500 N
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- Pull and pressure force measurement
- 1600 Hz sampling rate
- Interface: USB
- 6 different measuring tips
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: AQ-200 Set EF

The Formaldehyde Meter AQ-200 Set EF is a high-precision measuring device for measuring the formaldehyde concentration in our circulating air. You can buy the Formaldehyde Meter AQ-200 Set EF here in our online shop.


- Range Formaldehyde: 0...10 ppm
- High accuracy and functionality
- LCD display
- Battery operation
- Sensor calibration function
- Max. / Min. / Average function

Manufacturer: AeroQual Limited
Test Instruments manufacturer
Order no.: PCE-MPC 30
This Particle Counter Device has many functions. With the Particle Counter Device it is possible to determine the number of particles in the size of 0.3, 2.5 and 10 µm.

- Measurable particle sizes:  PM 2.5 and PM 10
- Measuring range: 0 ... 2000 µg / m³
- Resolution: 1 µg / m³
- Particle counter, HCHO, temperature measurement
- Dew point and wet bulb temperature
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-KD9

The Multi Channel Data Logger PCE-KD9 can be applied to either capture, visualize, save or control measuring data and processes. This multi channel data logger is a device for universal application based on Linux operating systems. Through three slots, each with inputs, the multi channel data logger can be equipped with up to 72 analogue inputs, 72 binary inputs, 36 TC inputs (e.g. type K thermal element), 18 RTD inputs (e.g. PT100 probes), 36 relay / SSR- inputs or 24 analogue outputs.

 

- Max. 72 analogue and binary inputs
- Graphics-capable 5.7" TFT display with touch screen
- Transmitter power supply 24 V DC / 200 mA
- 8 integrated PID controllers
- Interface RS485 / Modbus RTU
- Dimensions: 144 x 144 mm

 

Note: This item must be configured before ordering!

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-KD9

The paperless recorder PCE-KD9 can be applied to either capture, visualize, save or control measuring data and processes. This paperless recorder is a device for universal application based on Linux operating systems. Through three slots, each with inputs, the paperless recorder can be equipped with up to 72 analogue inputs, 72 binary inputs, 36 TC inputs (e.g. type K thermal element), 18 RTD inputs (e.g. PT100 probes), 36 relay / SSR- inputs or 24 analogue outputs.

 

- Max. 72 analogue and binary inputs
- Graphics-capable 5.7" TFT display with touch screen
- Transmitter power supply 24 V DC / 200 mA
- 8 integrated PID controllers
- Interface RS485 / Modbus RTU
- Dimensions: 144 x 144 mm

 

Note: This item must be configured before ordering!

Manufacturer: PCE Instruments
Test Instruments manufacturer