Industrial Measurement Products and Solutions
Order no.: AQ-300

Gas Detector AQ-300 is a highly accurate instrument for measuring ozone concentrations in the air. The Gas Detector can be equipped with four different heads that vary in their measurement range.


- High accuracy and functionality
- Battery operation
- Alarm function

 

Attention! No sensor head is included in the delivery, it must be ordered separately as an accessory!

 

Manufacturer: Aeroqual
Test Instruments manufacturer
Order no.: AQ-300

Ozone Meter AQ-300 is a highly accurate instrument for measuring ozone concentrations in the air. The Ozone Meter can be equipped with four different heads that vary in their measurement range.


- High accuracy and functionality
- Battery operation
- Alarm function

 

Attention! No sensor head is included in the delivery, it must be ordered separately as an accessory!

 

Manufacturer: Aeroqual
Test Instruments manufacturer
Order no.: PCE-MPC 30
This Air Quality Meter has many functions. With the Air Quality Meter it is possible to determine the number of particles in the size of 0.3, 2.5 and 10 µm.
 
- Measurable particle sizes:  PM 2.5 and PM 10
- Measuring range: 0 ... 2000 µg / m³
- Resolution: 1 µg / m³
- Particle counter, HCHO, temperature measurement
- Dew point and wet bulb temperature
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MPC 30
This Air Sampling Device has many functions. With the Air Sampling Device it is possible to determine the number of particles in the size of 0.3, 2.5 and 10 µm.
 
- Measurable particle sizes:  PM 2.5 and PM 10
- Measuring range: 0 ... 2000 µg / m³
- Resolution: 1 µg / m³
- Particle counter, HCHO, temperature measurement
- Dew point and wet bulb temperature
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RTD 20
The RTD calibrator PCE-RTD 20 is used to simulate resistors and resistance temperature sensors. Thus, the RTD calibrator is able to be used as a calibrator for temperature measuring devices. You can buy the RTD calibrator PCE-RTD 20 here in our online shop.

- Simulation and measurement mode
- Graphic LCD
- 24V supply for current loops
- HART compatible
- Manual mode & ramp function
- Continuity test
- Data logger function
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-GPA 62

Three-Phase Clamp Meter with network analyzer / power and energy meter with data logger. The three-phase harmonic Analyzer (Graphic Power Quality Analyzer) is used for single-phase or three-phase measurements of active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics. This clamp meter is a perfect tool for all energetic measurements. It is delivered manufacturer calibrated and can be certified to ISO or standards.


- Real-time test, register and measurement of voltage and current (real and effective) 
- Measures power factor and phase angle, frequency, energy, active, reactive and apparent power 
  (single-phase or three-phase in symmetrical networks). 
- Max. conductor diameter: 55 mm / 2.2 in
- Records up to 50,000 records


Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-GPA 62

Clamp on Tester with network Analyzer / Clamp on Tester with data logger. The Clamp on Tester (Graphic Power Quality Analyzer) PCE-GPA 62 is used for single-phase or three-phase measurements of the active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics up to 50? of the harmonic waveform. As all test instruments, the Clamp on Tester is delivered manufacturer calibrated (ISO certification is available optional).


- Real-time test, register and measurement of voltage and current (real and effective) 
- Measures power factor and phase angle, frequency, energy, active, reactive and apparent power 
  (single-phase or three-phase in symmetrical networks). 
- Max. conductor diameter: 55 mm / 2.2 in
- Records up to 50,000 records


Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RTD 20
The RTD current calibrator PCE-RTD 20 is used to simulate resistors and resistance temperature sensors. Thus, the RTD current calibrator is able to be used as a calibrator for temperature measuring devices. You can buy the RTD current calibrator PCE-RTD 20 here in our online shop.

- Simulation and measurement mode
- Graphic LCD
- 24V supply for current loops
- HART compatible
- Manual mode & ramp function
- Continuity test
- Data logger function
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-GPA 62

The Three-Phase Current Clamp (Graphic Power Quality Analyzer) PCE-GPA 62 is used for single-phase or three-phase measurements of the active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics.


- Real-time test, register and measurement of voltage and current (real and effective) 
- Measures power factor and phase angle, frequency, energy, active, reactive and apparent power 
  (single-phase or three-phase in symmetrical networks). 
- Max. conductor diameter: 55 mm / 2.2 in
- Records up to 50,000 records


Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MPC 30
This Dust Measuring Device has many functions. With the Dust Measuring Device it is possible to determine the number of particles in the size of 0.3, 2.5 and 10 µm.
 
- Measurable particle sizes:  PM 2.5 and PM 10
- Measuring range: 0 ... 2000 µg / m³
- Resolution: 1 µg / m³
- Particle counter, HCHO, temperature measurement
- Dew point and wet bulb temperature
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DFG N 500

Dynamometer PCE-DFG N 500 for tensile force measurement and pressure force measurement up to 500 N. The PCE-DFG N 500 is a digital force gauge PCE-DFG N 500 for precise measurements with a resolution of 0.1 N.

- Measuring range: 0 ... 500 N, 0 ... 112 lbs
- Accuracy: ± 0.1% of the measuring range of N, kg, lb, KPa
- Memory for 100 measurements
- Pull and pressure force measurement
- 1600 Hz sampling rate
- Interface: USB
- 6 different measuring tips
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MPC 30
This Environmental Testing Device has many functions. With the Environmental Device it is possible to determine the number of particles in the size of 0.3, 2.5 and 10 µm.
 
- Measurable particle sizes:  PM 2.5 and PM 10
- Measuring range: 0 ... 2000 µg / m³
- Resolution: 1 µg / m³
- Particle counter, HCHO, temperature measurement
- Dew point and wet bulb temperature
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MPC 30
This Fine Dust Measuring Device has many functions. With the fine dust measuring device it is possible to determine the number of particles in the size of 0.3, 2.5 and 10 µm.
 
- Measurable particle sizes:  PM 2.5 and PM 10
- Measuring range: 0 ... 2000 µg / m³
- Resolution: 1 µg / m³
- Particle counter, HCHO, temperature measurement
- Dew point and wet bulb temperature
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DFG N 500

Digital force gauge PCE-DFG N 500 for tensile force measurement and pressure force measurement up to 500 N. The PCE-DFG N 500 is a digital force gauge PCE-DFG N 500 for precise measurements with a resolution of 0.1 N.

- Measuring range: 0 ... 500 N
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- Pull and pressure force measurement
- 1600 Hz sampling rate
- Interface: USB
- 6 different measuring tips
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: AQ-200 Set EF

The Formaldehyde Meter AQ-200 Set EF is a high-precision measuring device for measuring the formaldehyde concentration in our circulating air. You can buy the Formaldehyde Meter AQ-200 Set EF here in our online shop.


- Range Formaldehyde: 0...10 ppm
- High accuracy and functionality
- LCD display
- Battery operation
- Sensor calibration function
- Max. / Min. / Average function

Manufacturer: AeroQual Limited
Test Instruments manufacturer
Order no.: PCE-GPA 62

HVAC Meter with network Analyzer / Clamp on Tester with data logger.


- Real-time test, register and measurement of voltage and current (real and effective) 
- Measures power factor and phase angle, frequency, energy, active, reactive and apparent power 
  (single-phase or three-phase in symmetrical networks). 
- Max. conductor diameter: 55 mm / 2.2 in
- Records up to 50,000 records


Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RS 27

Rigid Inspection Camera for visual inspection in small and narrow holes and cavities. With a diameter of 2.7 mm / 0.11 in and a length of 175 mm / 6.9 in this rigid Inspection Camera is very versatile. The integrated LED lamp allows for a very good illumination of cavities to be inspected.


- Diameter 2.7 mm / 0.11 in
- Useful length 175 mm / 6.9 in
- LED lighting
- Battery operation

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MPC 30
This Particle Counter Device has many functions. With the Particle Counter Device it is possible to determine the number of particles in the size of 0.3, 2.5 and 10 µm.
 
- Measurable particle sizes:  PM 2.5 and PM 10
- Measuring range: 0 ... 2000 µg / m³
- Resolution: 1 µg / m³
- Particle counter, HCHO, temperature measurement
- Dew point and wet bulb temperature
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-GPA 62

The 1-Phase-Power Meter PCE-GPA 62 (Graphic Power Quality Analyzer) with network analyzer / power and energy meter with data logger. The one-phase harmonic Analyzer (Graphic Power Quality Analyzer) is used for single-phase or three-phase measurements of active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics. This clamp meter is a perfect tool for all energetic measurements. It is delivered manufacturer calibrated and can be certified to ISO or standards.

- Real-time test, register and measurement of voltage and current (real and effective) 
- Measures power factor and phase angle, frequency, energy, active, reactive and apparent power 
  (single-phase or three-phase in symmetrical networks). 
- Max. conductor diameter: 55 mm / 2.2 in
- Records up to 50,000 records


Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-GPA 62

This power analyzer is used for single-phase or three-phase measurements of the active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics up to 50º of the harmonic waveform. The power analyzer clamp is equipped with data logger. The test instrument is delivered manufacurer calibrated (ISO or certification as an option).


- Real-time test, register and measurement of voltage and current (real and effective) 
- Measures power factor and phase angle, frequency, energy, active, reactive and apparent power 
  (single-phase or three-phase in symmetrical networks). 
- Max. conductor diameter: 55 mm / 2.2 in
- Records up to 50,000 records


Manufacturer: PCE Instruments
Test Instruments manufacturer