Query results | PCE Instruments

£ 614.00

Price excl. VAT &. delivery
2 year Warranty

Verification for Trade / conformity assessment

The platform scale is a low-cost robust verifiable system balance. The calibration of the platform scale is according to the trading class M III. The sturdy foundation of the platform scale is made of painted steel and features a plastic-coated steel platform.

Weighing capacity: 300 kg
Readability: 100 g
Minimum load: 2 kg
Platform size: 400 x 500 mm
Certifiable: M III

Shipping Scale PCE-SD 300C

£ 614.00

Price excl. VAT &. delivery
2 year Warranty

The shipping scale PCE-SD 300C is a low-cost robust verifiable system balance. The calibration of the shipping scale is according to the trading class M III. The sturdy foundation of the shipping scale is made of painted steel and features a plastic-coated steel platform.

Weighing capacity: 300 kg
Readability: 100 g
Minimum load: 2 kg
Platform size: 400 x 500 mm
Certifiable: M III

System Balance PCE-SD 300C

£ 614.00

Price excl. VAT &. delivery
2 year Warranty

The system balance PCE-SD300Cisa low-costrobustverifiablesystembalance.Thecalibration of thesystem balance is according to thetradingclassM III.The sturdyfoundationof thesystem balanceis made of paintedsteel andfeatures a plastic-coated steelplatform.

Weighing capacity: 300 kg
Readability:100g
Minimum load: 2kg
Certifiable:M III

Tabletop Scale PCE-SD 300C

£ 614.00

Price excl. VAT &. delivery
2 year Warranty

The tabletop scales PCE-SD 300C are low-cost robust verifiable system balances. The calibration is according to the trading class M III. The sturdy foundation of the tabletop scales is made of painted steel and features a plastic-coated steel platform.

Weighing capacity: 300 kg
Readability: 100 g
Minimum load: 2 kg
Platform size: 400 x 500 mm
Certifiable: M III

Trade Approved Scale PCE-SD 300C

£ 614.00

Price excl. VAT &. delivery
2 year Warranty

The trade approved scale PCE-SD300Cisa low-costrobustverifiablesystembalance.Thecalibration of thetrade approved scale is according to thetradingclassM III.The sturdyfoundationof thetrade approved scaleis made of paintedsteel andfeatures a plastic-coated steelplatform.

Weighing capacity: 300 kg
Readability:100g
Minimum load: 2kg
Certifiable:M III

Weighing Platform PCE-SD 300C

£ 614.00

Price excl. VAT &. delivery
2 year Warranty

The weighing platform PCE-SD300Cisa low-costrobustverifiablesystembalance.Thecalibration of theweighing platform is according to thetradingclassM III.The sturdyfoundationof theweighing platformis made of paintedsteel andfeatures a plastic-coated steelplatform.

Weighing capacity: 300 kg
Readability: 100 g
Minimum load: 2 kg
Platform size: 400 x 500 mm
Certifiable: M III

Automotive Tester PCE-CT 80-FN0D5

£ 610.00

Price excl. VAT &. delivery
2 year Warranty

The automotive tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the automotive tester, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 500 µm, NFe: 0 … 500 µm
Accuracy after foil calibration: ±(1% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Car Measuring Device PCE-CT 80-FN0D5

£ 610.00

Price excl. VAT &. delivery
2 year Warranty

The car measuring device is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the car measuring device, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 500 µm, NFe: 0 … 500 µm
Accuracy after foil calibration: ±(1% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Coating Thickness Gauge PCE-CT 80-FN0D5

£ 610.00

Price excl. VAT &. delivery
2 year Warranty

The coating thickness gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the coating thickness gauge, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 500 µm, NFe: 0 … 500 µm
Accuracy after foil calibration: ±(1% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Force Gage PCE-N50F

£ 610.00

Price excl. VAT &. delivery
2 year Warranty

The force gage is suitable for panel mounting. This force gage can be used to indicate the weight, force or torque. The decisive factor here is the type of sensor that is connected to the force gage.

Signal input range: 0 … 20 mV
Units: g, mN, mlb, Pa, kg, N, Ib, kPa, t, kN, klb, MPa
For load cells, force sensors, etc.
Up to 1600 Hz sampling rate
LCD display

Force Gauge PCE-N50F

£ 610.00

Price excl. VAT &. delivery
2 year Warranty

The force gauge is suitable for panel mounting. This force gauge can be used to indicate the weight, force or torque. The decisive factor here is the type of sensor that is connected to the force gauge.

Signal input range: 0 … 20 mV
Units: g, mN, mlb, Pa, kg, N, Ib, kPa, t, kN, klb, MPa
For load cells, force sensors, etc.
Up to 1600 Hz sampling rate
LCD display

Force Indicator PCE-N50F

£ 610.00

Price excl. VAT &. delivery
2 year Warranty

The force indicator is suitable for panel mounting. This force indicator can be used to indicate the weight, force or torque. The decisive factor here is the type of sensor that is connected to the force indicator.

Signal input range: 0 … 20 mV
Units: g, mN, mlb, Pa, kg, N, Ib, kPa, t, kN, klb, MPa
For load cells, force sensors, etc.
Up to 1600 Hz sampling rate
LCD display

Indicator PCE-N50F

£ 610.00

Price excl. VAT &. delivery
2 year Warranty

The indicator is suitable for panel mounting. This indicator can be used to indicate the weight, force or torque. The decisive factor here is the type of sensor that is connected to the indicator.

Signal input range: 0 … 20 mV
Units: g, mN, mlb, Pa, kg, N, Ib, kPa, t, kN, klb, MPa
For load cells, force sensors, etc.
Up to 1600 Hz sampling rate
LCD display

Material Tester PCE-CT 80-FN0D5

£ 610.00

Price excl. VAT &. delivery
2 year Warranty

The material tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material tester, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 500 µm, NFe: 0 … 500 µm
Accuracy after foil calibration: ±(1% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Material Thickness Meter PCE-CT 80-FN0D5

£ 610.00

Price excl. VAT &. delivery
2 year Warranty

The material thickness meter is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material thickness meter, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 500 µm, NFe: 0 … 500 µm
Accuracy after foil calibration: ±(1% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Paint Gauge PCE-CT 80-FN0D5

£ 610.00

Price excl. VAT &. delivery
2 year Warranty

The paint gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint gauge, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 500 µm, NFe: 0 … 500 µm
Accuracy after foil calibration: ±(1% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Paint Thickness Tester PCE-CT 80-FN0D5

£ 610.00

Price excl. VAT &. delivery
2 year Warranty

The paint thickness tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint thickness tester, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 500 µm, NFe: 0 … 500 µm
Accuracy after foil calibration: ±(1% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Panel Meter PCE-N50F

£ 610.00

Price excl. VAT &. delivery
2 year Warranty

The panel meter is suitable for panel mounting. This panel meter can be used to indicate the weight, force or torque. The decisive factor here is the type of sensor that is connected to the panel meter.

Signal input range: 0 … 20 mV
Units: g, mN, mlb, Pa, kg, N, Ib, kPa, t, kN, klb, MPa
For load cells, force sensors, etc.
Up to 1600 Hz sampling rate
LCD display