Industrial Measurement Products and Solutions
Order no.: PCE-GPA 50
The PCE-GPA 50 clamp meter is used to measure the current of 1- or 3-phase loads. This clamp meter PCE-GPA 50 is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the clamp meter.

Measurement functions
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
Manufacturer: PCE Instruments
£ 604.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-GPA 50
The PCE-GPA 50 clamp on tester is used to measure the current of 1- or 3-phase loads. This clamp on tester PCE-GPA 50 is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the clamp on tester.

Measurement functions
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
Manufacturer: PCE Instruments
£ 604.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-GPA 50
The PCE-GPA 50 digital multimeter is used to measure the current of 1- or 3-phase loads. This digital multimeter PCE-GPA 50 is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the digital multimeter.

Measurement functions
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
Manufacturer: PCE Instruments
£ 604.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-GPA 50
The PCE-GPA 50 electrical tester is used to measure the current of 1- or 3-phase loads. This electrical tester PCE-GPA 50 is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the electrical tester.

Measurement functions
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
Manufacturer: PCE Instruments
£ 604.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-GM 80-ICA
The gloss meter is equipped with an external gloss sensor. The measuring surface of Ø 4.5 mm of the gloss meter also contributes significantly to being able to carry out measurements on small surfaces that are difficult to access.

- Measurement geometry: 60°
- Measuring range up to 1000 GU
- Measuring surface: Ø 4.5 mm
- Data storage: 1245 measured values
- Interface: Micro USB
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
£ 604.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-GPA 50
The PCE-GPA 50 HVAC meter is used to measure the current of 1- or 3-phase loads. This HVAC meter PCE-GPA 50 is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the HVAC meter.

Measurement functions
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
Manufacturer: PCE Instruments
£ 604.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-GM 80-ICA
The NDT Tester - Gloss Meter is equipped with an external gloss sensor. The measuring surface of Ø 4.5 mm of the gloss meter also contributes significantly to being able to carry out measurements on small surfaces that are difficult to access.

- Measurement geometry: 60°
- Measuring range up to 1000 GU
- Measuring surface: Ø 4.5 mm
- Data storage: 1245 measured values
- Interface: Micro USB
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
£ 604.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-GM 80-ICA
The gloss meter is equipped with an external gloss sensor. The measuring surface of Ø 4.5 mm of the gloss meter also contributes significantly to being able to carry out measurements on small surfaces that are difficult to access.

- Measurement geometry: 60°
- Measuring range up to 1000 GU
- Measuring surface: Ø 4.5 mm
- Data storage: 1245 measured values
- Interface: Micro USB
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
£ 604.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-GPA 50
The PCE-GPA 50 1-phase power meter is used to measure the current of 1- or 3-phase loads. This 1-phase power meter PCE-GPA 50 is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the 1-phase power meter.

Measurement functions
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
Manufacturer: PCE Instruments
£ 604.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-GPA 50
The PCE-GPA 50 power analyzer is used to measure the current of 1- or 3-phase loads. This power analyzer PCE-GPA 50 is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the power analyzer.

Measurement functions
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
Manufacturer: PCE Instruments
£ 604.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-GPA 50
The PCE-GPA 50 power meter is used to measure the current of 1- or 3-phase loads. This power meter is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the power meter.

Measurement functions
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- Harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
Manufacturer: PCE Instruments
£ 604.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-GM 80-ICA
The surface testing gloss meter is equipped with an external gloss sensor. The measuring surface of Ø 4.5 mm of the gloss meter also contributes significantly to being able to carry out measurements on small surfaces that are difficult to access.

- Measurement geometry: 60°
- Measuring range up to 1000 GU
- Measuring surface: Ø 4.5 mm
- Data storage: 1245 measured values
- Interface: Micro USB
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
£ 604.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-GPA 50
The 3-phase power meter / 3-phase power analyzer is used to measure the current of 1- or 3-phase loads. This 3-phase power meter is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the 3-phase power analyzer.

Measurement functions
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
Manufacturer: PCE Instruments
£ 604.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-GPA 50
The PCE-GPA 50 voltmeter is used to measure the current of 1- or 3-phase loads. This voltmeterPCE-GPA 50 is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the voltmeter.

Measurement functions
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
Manufacturer: PCE Instruments
£ 604.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: STAND-PCE-DDx10

Test stand for PCE-DDx series durometers. The test stand can be used to mount the durometers. The test stand allows precise positioning of the probe on the test object. 

- Test stand for mounting of the PCE-DDx durometers

Manufacturer: PCE Instruments
£ 599.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: Xgard-IR-1

The Xgard-IR-1 is a single-gas Gas Leak Detector used to warn for gases (Carbon Dioxide, CO2, 0 ... 5 %), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Carbon Dioxide, CO2, 0 ... 5 %)
- Additional display and alarm station
- ATEX or UL approval

Manufacturer: Crowcon Detection Instruments Ltd.
£ 590.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-MO 2002

Electrical Tester with ruggedized and waterproof carrying case.


- Measuring ranges / resolution: 0 ... 200 mΩ / 100 μΩ, 0 ... 2000 mΩ, etc.
- Accuracy: ± 0.5% of reading
- Max. Output voltage: (C1-C2) 20 V

 

Manufacturer: PCE Instruments
£ 594.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-MO 2002

Milliohm Meter with ruggedized and waterproof carrying case. Includes 4 test leads with clips.


- Measuring ranges / resolution: 5 ranges, 0 ... 200 mΩ / 0 ... 2000 Ω
- Accuracy: ± 0.5% of reading
- Max. Output voltage: (C1-C2) 20 V
- Power source 12V DC

 

Manufacturer: PCE Instruments
£ 594.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-HT 224E
The Concrete Test Hammer is a measuring tool for testing the strength of concrete. The Concrete Test Hammer measures strength according to the Schmidt principle. According to this measurement method, the quality of concrete can be measured with the Concrete Test Hammer.  The Concrete Test Hammer is also suitable for measuring hardness of rolled paper.  The Concrete Test Hammer displays measurements Rebound Value and can display force in PSI (lbs / in²), MPa, kgF/cm², or N/mm².

- Measuring range: 10 ... 60 N/mm² / 1500 ... 8500 PSI (lbs / in²)
- Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
- Digital Display of results
- USB interface for connection to a PC
Data storage
- Rechargeable battery
Manufacturer: PCE Instruments
£ 593.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-HT 224E
The Hardness Tester is a measuring tool for testing the strength of concrete. The Hardness Tester measures strength according to the Schmidt principle. According to this measurement method, the quality of concrete can be measured with the Hardness Tester.  The Hardness Tester is also suitable for measuring hardness of rolled paper.  The Hardness Tester displays measurements Rebound Value and can display force in PSI, MPa, kgF/cm², or N/mm².

- Measuring range: 10 ... 60 N/mm² / 1500 ... 8500 PSI (lbs / in²)
- Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
- Digital Display of results
- USB interface for connection to a PC
Data storage
- Rechargeable battery
Manufacturer: PCE Instruments
£ 593.00

Price excl. VAT &. delivery
2 year Warranty