Order no.: PCE-009

This hot wire wind measurer has a good relation between price and quality and it combines accuracy and versatility with the ability to transfer data directly to a computer. This hot wire wind measurer forms a part of a professional's basic equipment to regulate and test ventilation systems. All the test instruments come manufacturer calibrated. ISO certification can be made as an option.


- Measurement range: 0.2 ... 20.0 m/s
- Measurement range: 0.0 ... 50.0°C / 32 ... 122°F (sensor)
- Volume of air current:  0 ... 36,000 m3/min
- Internal memory: 16,000 values
- Sampling rate: 1 sec

 

Manufacturer: PCE Instruments
£ 529.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-009

This HVAC meter has a good relation between price and quality and it combines accuracy and versatility with the ability to transfer data directly to a computer. This HVAC meter forms a part of a professional's basic equipment to regulate and test ventilation systems. All the test instruments come manufacturer calibrated. ISO certification can be made as an option.


- Measurement range: 0.2 ... 20.0 m/s
- Measurement range: 0.0 ... 50.0°C / 32 ... 122°F (sensor)
- Volume of air current:  0 ... 36,000 m3/min
- Internal memory: 16,000 values
- Sampling rate: 1 sec

 

Manufacturer: PCE Instruments
£ 529.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-N50F
The indicator PCE-N50F is suitable for panel mounting. This indicator PCE-N50F can be used to indicate the weight, force or torque. The decisive factor here is the type of sensor that is connected to the indicator PCE-N50F.

- Signal input range: 0 ... 20 mV
- Units: g, mN, mlb, Pa, kg, N, Ib, kPa, t, kN, klb, MPa
- For load cells, force sensors, etc.
- Up to 1600 Hz sampling rate
- LCD display
Manufacturer: PCE Instruments
£ 529.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-HT 224E
The Material Tester is a measuring tool for testing the strength of concrete. The Material Tester measures strength according to the Schmidt principle. According to this measurement method, the quality of concrete can be measured with the Material Tester.  The Material Tester is also suitable for measuring hardness of rolled paper.  The Material Tester displays measurements Rebound Value and can display force in PSI, MPa, kgF/cm², or N/mm².

- Measuring range: 10 ... 60 N/mm² / 1500 ... 8500 PSI (lbs / in²)
- Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
- Digital Display of results
- USB interface for connection to a PC
Data storage
- Rechargeable battery
Manufacturer: PCE Instruments
£ 529.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-HT 224E
The NDT Tester is a measuring tool for testing the strength of concrete. The NDT Tester measures strength according to the Schmidt principle. According to this measurement method, the quality of concrete can be measured with the NDT Tester.  The NDT Tester is also suitable for measuring hardness of rolled paper.  The NDT Tester displays measurements Rebound Value and can display force in PSI, MPa, kgF/cm², or N/mm².

- Measuring range: 10 ... 60 N/mm² / 1500 ... 8500 PSI (lbs / in²)
- Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
- Digital Display of results
- USB interface for connection to a PC
Data storage
- Rechargeable battery
Manufacturer: PCE Instruments
£ 529.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-HT 224E
The Roll Hardness Tester is a measuring tool for testing the strength of concrete. The Roll Hardness Tester measures strength according to the Schmidt principle. According to this measurement method, the quality of rolled paper can be measured with the Hardness Tester.  The Hardness Tester is also suitable for measuring hardness of concrete.  The Hardness Tester displays measurements Rebound Value and can display force in PSI, MPa, kgF/cm², or N/mm².

- Measuring range: 10 ... 60 N/mm² / 1500 ... 8500 PSI (lbs / in²)
- Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
- Digital Display of results
- USB interface for connection to a PC
Data storage
- Rechargeable battery
Manufacturer: PCE Instruments
£ 529.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-VDR 10

PCE-VDR 10 is a single-axis accelerometer or shock data logger with real-time measurement and data logging capabilities. This single-axis shock data logger records acceleration (m/s, g, ft/s) as well as velocity (mm/s, cm/s, in/s) measurements and saves the measured data to an included SD card memory. There is also an analog output, which makes this shock data logger compatlble with control systems.


- Single-axis Acceleration measuring range: 
  0.5 ... 199.9 m/s, 0.05 ... 20.39 g, 2 ... 656 ft/s
- Velocity measuring ranges: 
  0.5 ... 199.9 mm/s, 0.05 ... 19.99 cm/s, 0.02 ... 7.87 in/s
- Frequency range: 10 ... 1000 Hz
- Analog output: 4 ... 20 mA
- RS-232 and USB interface

Manufacturer: PCE Instruments
£ 529.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-HT 224E
The Surface Tester is a measuring tool for testing the strength of concrete. The Surface Tester measures strength according to the Schmidt principle. According to this measurement method, the quality of concrete can be measured with the Surface Tester.  The Surface Tester is also suitable for measuring hardness of rolled paper.  The Surface Tester displays measurements Rebound Value and can display force in PSI, MPa, kgF/cm², or N/mm².

- Measuring range: 10 ... 60 N/mm² / 1500 ... 8500 PSI (lbs / in²)
- Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
- Digital Display of results
- USB interface for connection to a PC
Data storage
- Rechargeable battery
Manufacturer: PCE Instruments
£ 529.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-PGM 60-ICA

The PCE-PGM 60 Surface Testing has a measuring geometry of 60°. The Surface Testing is used to analyze surfaces of different materials. Gloss measurements are particularly carried out in the production industry where products must have exactly the same characteristics.


- Measurement geometry: 60° degree angle
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Measuring range: 0 ... 300 GU
- Light source: D65
- Wave length: 400-700 nm
- Incl. ISO calibration certificate
- Includes PC-compatible software for detailed analysis

Manufacturer: PCE Instruments
£ 529.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: LTS-20

LTS-20 Force Gauge Test Stand is designed to be used in combination with either the PCE-FM series, PCE-DFG series, or PCE-PTR. The Test Stand offers the ideal solution for measuring traction and compression, and guarantees precise correspondence between the test matrix and the test position.


- Maximum usable length: 345 mm
- Total length: 530 mm (without hand wheel)
- Hand wheel diameter: 120 mm
- Maximum range of force: 1000 N / 100 kg / 220 lbs
- the mounting plate ADP-UNI must be ordered at the same time!

 

Manufacturer: PCE Instruments
£ 529.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-009

This thermal anemometer has a good relation between price and quality and it combines accuracy and versatility with the ability to transfer data directly to a computer. This thermal anemometer forms a part of a professional's basic equipment to regulate and test ventilation systems. All the test instruments come manufacturer calibrated. ISO certification can be made as an option.


- Measurement range: 0.2 ... 20.0 m/s
- Measurement range: 0.0 ... 50.0°C / 32 ... 122°F (sensor)
- Volume of air current:  0 ... 36,000 m3/min
- Internal memory: 16,000 values
- Sampling rate: 1 sec

 

Manufacturer: PCE Instruments
£ 529.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-009

This thermo-anemometer has a good relation between price and quality and it combines accuracy and versatility with the ability to transfer data directly to a computer. This thermo-anemometer forms a part of a professional's basic equipment to regulate and test ventilation systems. All the test instruments come manufacturer calibrated. ISO certification can be made as an option.


- Measurement range: 0.2 ... 20.0 m/s
- Measurement range: 0.0 ... 50.0°C / 32 ... 122°F (sensor)
- Volume of air current:  0 ... 36,000 m3/min
- Internal memory: 16,000 values
- Sampling rate: 1 sec

 

Manufacturer: PCE Instruments
£ 529.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-VDR 10

PCE-VDR 10 is a single-axis accelerometer or vibration analyzer with real-time measurement and data logging capabilities. This vibration monitor records acceleration (m/s, g, ft/s) as well as speed (mm/s, cm/s, in/s) measurements and saves the measured data to an included SD card memory.


- Acceleration measuring range:
  0.5 ... 199.9 m/s, 0.05 ... 20.39 g, 2 ... 656 ft/s
- Speed measuring range:
  0.5 ... 199.9 mm/s, 0.05 ... 19.99 cm/s, 0.02 ... 7.87 in/s
- Frequency range: 10 ... 1000 Hz
- Analog output: 4 ... 20 mA
- RS-232 and USB interface

 

Manufacturer: PCE Instruments
£ 529.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-VDR 10

PCE-VDR 10 is a single-axis accelerometer or vibration data logger monitor with real-time measurement and data logging capabilities. This vibration data logger records acceleration (m/s, g, ft/s) as well as velocity (mm/s, cm/s, in/s) measurements and saves the measured data to an included SD card memory. There is also an analog output, which makes this vibration data logger compatlble with control systems.

- Acceleration measuring range: 
  0.5 ... 199.9 m/s, 0.05 ... 20.39 g, 2 ... 656 ft/s
- Velocity measuring ranges: 
  0.5 ... 199.9 mm/s, 0.05 ... 19.99 cm/s, 0.02 ... 7.87 in/s
- Frequency range: 10 ... 1000 Hz
- Analog output: 4 ... 20 mA
- RS-232 and USB interface

Manufacturer: PCE Instruments
£ 529.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-VDR 10

PCE-VDR 10 is a single-axis vibration meter or monitor with real-time measurement and data logging capabilities. This vibration analyzer records acceleration (m/s, g, ft/s) as well as speed (mm/s, cm/s, in/s) measurements and saves the measured data to an included SD card memory.


- Acceleration measuring range:
  0.5 ... 199.9 m/s, 0.05 ... 20.39 g, 2 ... 656 ft/s
- Speed measuring range:
  0.5 ... 199.9 mm/s, 0.05 ... 19.99 cm/s, 0.02 ... 7.87 in/s
- Frequency range: 10 ... 1000 Hz
- Analog output: 4 ... 20 mA
- RS-232 and USB interface

 

Manufacturer: PCE Instruments
£ 529.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-VDR 10

PCE-VDR 10 is a single-axis vibration recorder or monitor with real-time measurement and data logging capabilities. This vibration recorder records acceleration (m/s, g, ft/s) as well as speed (mm/s, cm/s, in/s) measurements and saves the measured data to an included SD card memory.


- Acceleration measuring range:
  0.5 ... 199.9 m/s, 0.05 ... 20.39 g, 2 ... 656 ft/s
- Speed measuring range:
  0.5 ... 199.9 mm/s, 0.05 ... 19.99 cm/s, 0.02 ... 7.87 in/s
- Frequency range: 10 ... 1000 Hz
- Analog output: 4 ... 20 mA
- RS-232 and USB interface

 

Manufacturer: PCE Instruments
£ 529.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-N50F
The weight indicator PCE-N50F is suitable for panel mounting. This weight indicator PCE-N50F can be used to indicate the weight, force or torque. The decisive factor here is the type of sensor that is connected to the weight indicator PCE-N50F.

- Signal input range: 0 ... 20 mV
- Units: g, mN, mlb, Pa, kg, N, Ib, kPa, t, kN, klb, MPa
- For load cells, force sensors, etc.
- Up to 1600 Hz sampling rate
- LCD display
Manufacturer: PCE Instruments
£ 529.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-009

This wind speed meter has a good relation between price and quality and it combines accuracy and versatility with the ability to transfer data directly to a computer. This wind speed meter forms a part of a professional's basic equipment to regulate and test ventilation systems. All the test instruments come manufacturer calibrated. ISO certification can be made as an option.


- Measurement range: 0.2 ... 20.0 m/s
- Measurement range: 0.0 ... 50.0°C / 32 ... 122°F (sensor)
- Volume of air current:  0 ... 36,000 m3/min
- Internal memory: 16,000 values
- Sampling rate: 1 sec

 

Manufacturer: PCE Instruments
£ 529.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-SD 300C

The counting scales PCE-SD 300C are low-cost robust verifiable system balances. The calibration is according to the trading class M III. The sturdy foundation of the counting scales is made of painted steel and features a plastic-coated steel platform.


- Weighing capacity: 300 kg
- Readability: 100 g
- Minimum load: 2 kg
- Platform size: 400 x 500 mm
- Certifiable: M III

 

Manufacturer: PCE Instruments
£ 525.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-WO2 10
The oxygen meter is a simple measuring instrument that allows measurement of oxygen content, oxygen saturation and sample temperature. The oxygen meter directly reports measured values in real time via the display.

- Measuring range oxygen content: 0.0 ... 20.0 mg/l
- Resolution oxygen content: 0.1 mg/l
- Measuring accuracy oxygen content: ±0.5 mg/l
Manufacturer: PCE Instruments
£ 525.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer