Order no.: PCE-GM 55
The Gloss Meter PCE-GM 55 is a 3-angle glossmeter. The measuring angles of the gloss meter are 20°, 45° and 75°. This allows the gloss meter to be used for gloss measurements in the high gloss and medium gloss ranges. The special measuring angle of 75° allows, among other things, measurements of the degree of gloss on paper and textiles.

- Range : 0 ... 200 gloss units / highlights
- Accuracy: ± 1 gloss units
- Repeatability: ± 0.5 gloss units
- Optical angle: 20°, 45°, 75°
- For medium and high gloss
- Measurements on textiles and paper possible
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 80
The paint layer thickness gauge PCE-CT 80 is a measuring device for the nondestructive measurement of coatings (paints, lacquers, plastics ...) on steel / iron and non-ferrous metals.

- Measuring range: Fe: 0 ... 5000 μm (0 ... 196.9 mils) / NFe: 0 ... 3000 μm (0 ... 118.1 mils)
- For many materials such as:
- Iron
- Steel
- Aluminum
- Copper
- Brass
- Stainless steel
- Incl. ISO laboratory calibration with certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 80
The paint layer thickness meter PCE-CT 80 is a measuring device for the nondestructive measurement of coatings (paints, lacquers, plastics ...) on steel / iron and non-ferrous metals.

- Measuring range: Fe: 0 ... 5000 μm (0 ... 196.9 mils) / NFe: 0 ... 3000 μm (0 ... 118.1 mils)
- For many materials such as:
- Iron
- Steel
- Aluminum
- Copper
- Brass
- Stainless steel
- Incl. ISO laboratory calibration with certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 330N

PCE-VE 330N is a videoscope, borescope, inspection camera or industrial endoscope for the non-destructive inspection (NDI) of engines, machines and more. This industrial borescope is an ideal tool for diagnosing issues in hard-to-reach places. The waterproof camera head features 4 LED lights with automatic illumination. In addition, digital image magnification or zoom of up to 2 times is available.


- Diameter camera head: Ø 5.5mm / 0.22"
- Interface: Mini-USB 1.1 and AV out
- Memory: 8 GB SD memory card (incl.)
- Cable length: 2 m / 6ft 6"

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: Gasman-NH3

The Air Quality Meter Gasman-NH3 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Air Quality Meter warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Air Quality Meter fulfills all the European and international norms, even ATEX and UL standards.


- Non-rechargeable, 1-year battery
- For NH3 (Ammonia Gas)
- Dust and water resistant - IP 65/67
- 0 ... 100 ppm

 

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: 117000
Stainless steel discs measuring system for measuring in a 150 ml beaker. This measurement system allows rapid and economical measurements.
Test Instruments manufacturer
Order no.: AQ-SM 70

The ozone meter AQ-SM 70, which is fixed to the wall, has been developed for the measurement and monitoring of gas by activating an internal switch.


- Measurement of ozone and VOC
- Continuous monitoring
- Large, easy to read display
- Different variations selectable!

 

Manufacturer: Aeroqual
Test Instruments manufacturer
Order no.: 5020-2400

The infrared thermometer Hi Temp 2400 measures surface temperatures over a wide temperature range. Additional notable benefits of the infrared thermometer are its very short reaction time (< 1 sec.) and the non-contact IR technology. This infrared thermometer (as all the test instruments) is delivered manufacturer calibrated and can additionally be certified to ISO.


- Measuring range: 200 ... 2400°C / 392 ... 4352°F
- Spectral range: 1.1 - 3.7 µm
- Resolution:  0.1°C / 0.18°F (<1000°C / 1832°F), 1°C / 1.8°F (1000°C / 1832°F)
- Accuracy: ±2 % or 2°C / 3.6°F, whichever is larger

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: 5020-2400

The Pyrometer Hi Temp 2400 measures surface temperatures over a wide temperature range. Additional notable benefits of the pyrometer are its very short reaction time (< 1 sec.) and the non-contact IR technology. This infrared thermometer (as all the test instruments) is delivered manufacturer calibrated and can additionally be certified to ISO.


- Measuring range: 200 ... 2400°C / 392 ... 4352°F
- Spectral range: 1.1 - 3.7 µm
- Resolution:  0.1°C / 0.18°F (<1000°C / 1832°F), 1°C / 1.8°F (1000°C / 1832°F)
- Accuracy: ±2 % or 2°C / 3.6°F, whichever is larger

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: 5020-2400

The Temperature Meter Hi Temp 2400 measures surface temperatures over a wide temperature range. Additional notable benefits of the Temperature Meter are its very short reaction time (< 1 sec.) and the non-contact IR technology. This Temperature Meter (as all the test instruments) is delivered manufacturer calibrated and can additionally be certified to ISO.


- Measuring range: 200 ... 2400°C / 392 ... 4352°F
- Spectral range: 1.1 - 3.7 µm
- Resolution:  0.1°C / 0.18°F (<1000°C / 1832°F), 1°C / 1.8°F (1000°C / 1832°F)
- Accuracy: ±2 % or 2°C / 3.6°F, whichever is larger

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: 5020-2400

The infrared thermometer Hi Temp 2400 measures surface temperatures over a wide temperature range. Additional notable benefits of the infrared thermometer are its very short reaction time (< 1 sec.) and the non-contact IR technology. This infrared thermometer (as all the test instruments) is delivered manufacturer calibrated and can additionally be certified to ISO.


- Measuring range: 200 ... 2400°C / 392 ... 4352°F
- Spectral range: 1.1 - 3.7 µm
- Resolution:  0.1°C / 0.18°F (<1000°C / 1832°F), 1°C / 1.8°F (1000°C / 1832°F)
- Accuracy: ±2 % or 2°C / 3.6°F, whichever is larger

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DDA 10-ICA

The PCE-DDA 10 shore durometer is an ergonomic device to check Shore hardness in gum, plastic and other non-metallic materials. It has been designed with a very high quality. The PCE-DDA 10 durometer is mainly used for soft gums, elastomers, natural rubber, neoprenes, casting resin, white PVC, leather, etc. It has a reading accuracy of 0.1 hardness units.


- Handheld device
- For Shore A measurements
- Single and Serial Measurements
- Data transfer to pc
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DDA 10-ICA

The PCE-DDA 10 shore hardness tester is an ergonomic device to check Shore hardness in gum, plastic and other non-metallic materials. It has been designed with a very high quality. The PCE-DDA 10 hardness tester is mainly used for soft gums, elastomers, natural rubber, neoprenes, casting resin, white PVC, leather, etc. It has a reading accuracy of 0.1 hardness units.


- Handheld device
- For Shore A measurements
- Single and Serial Measurements
- Data transfer to pc
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CS 3000N-ICA

PCE-CS 3000N-ICA is a digital, rechargeable battery-powered, heavy-duty crane scale that displays measurement values in kilograms (kg) or pounds (lbs). The crane scale includes a hook, shackle, remote control and ISO calibration certificate.


- Maximum weighing capacity: 3000 kg / 6613 lbs ≈ 3 Tons
- Resolution: 0.5 kg
- Tare range: 100 % full scale
- Includes hook, shackle, and remote control
- Includes ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CS 3000N-ICA

PCE-CS 3000N-ICA is a digital, rechargeable battery-powered, heavy-duty dynamometer that displays measurement values in kilograms (kg) or pounds (lbs). The dynamometer includes a hook, shackle, remote control and ISO calibration certificate.


- Maximum weighing capacity: 3000 kg / 6613 lbs ≈ 3 Tons
- Resolution: 0.5 kg
- Tare range: 100 % full scale
- Includes hook, shackle, and remote control
- Includes ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CS 3000N-ICA

PCE-CS 3000N-ICA is a digital, rechargeable battery-powered, heavy-duty force gauge that displays measurement values in kilograms (kg) or pounds (lbs). The force gauge includes a hook, shackle, remote control and ISO calibration certificate.


- Maximum weighing capacity: 3000 kg / 6613 lbs ≈ 3 Tons
- Resolution: 0.5 kg
- Tare range: 100 % full scale
- Includes hook, shackle, and remote control
- Includes ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CS 3000N-ICA

PCE-CS 3000N-ICA are digital, rechargeable battery-powered, heavy-duty hanging scales that display measurement values in kilograms (kg) or pounds (lbs). The industrial hanging scales include a hook, shackle, remote control and ISO calibration certificate.


- Maximum weighing capacity: 3000 kg / 6613 lbs ≈ 3 Tons
- Resolution: 0.5 kg
- Tare range: 100 % full scale
- Includes hook, shackle, and remote control
- Includes ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CS 3000N-ICA

PCE-CS 3000N-ICA is a digital, rechargeable battery-powered, heavy-duty scale that displays measurement values in kilograms (kg) or pounds (lbs). The heavy duty scale includes a hook, shackle, remote control and ISO calibration certificate.


- Maximum weighing capacity: 3000 kg / 6613 lbs ≈ 3 Tons
- Resolution: 0.5 kg
- Tare range: 100 % full scale
- Includes hook, shackle, and remote control
- Includes ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CS 3000N-ICA

PCE-CS 3000N-ICA is a digital, rechargeable battery-powered, heavy-duty weighing hook or crane scale that displays measurement values in kilograms (kg) or pounds (lbs). The crane scale includes a hook, shackle, remote control and ISO calibration certificate.


- Maximum weighing capacity: 3000 kg / 6613 lbs ≈ 3 Tons
- Resolution: 0.5 kg
- Tare range: 100 % full scale
- Includes hook, shackle, and remote control
- Includes ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DDM 3WI

The PCE-DDM 3WI Crane Scale is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 3WI Crane Scale is delivered in a protective carrying case and includes two shackles made of heavy-duty aluminum. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.


- Measurement range: 3,000 kg / 30 kN / 6,614 lbs
- Resolution: 1 kg / 10 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied without remote control / indicator

 

Manufacturer: PCE Instruments
Test Instruments manufacturer