The Xgard-IR-1 is a single-gas Gas Leak Detector used to warn for gases (Carbon Dioxide, CO₂, 0 ... 5 %), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Carbon Dioxide, CO₂, 0 ... 5 %)
- Additional display and alarm station
- ATEX or UL approval

Electrical Tester with ruggedized and waterproof carrying case.

- Measuring ranges / resolution: 0 ... 200 mΩ / 100 μΩ, 0 ... 2000 mΩ, etc.
- Accuracy: ± 0.5% of reading
- Max. Output voltage: (C1-C2) 20 V

Milliohm Meter with ruggedized and waterproof carrying case. Includes 4 test leads with clips.

- Measuring ranges / resolution: 5 ranges, 0 ... 200 mΩ / 0 ... 2000 Ω
- Accuracy: ± 0.5% of reading
- Max. Output voltage: (C1-C2) 20 V
- Power source 12V DC

The differential pressure meter PCE-PDA 1L is a reliable differential pressure gauge for pressure measurement of gasses in the range of ± 2 kPa. The differential pressure meter PCE-PDA 1L has many different pressure measuring functions.

- Measuring range: ± 2000 Pa  / ± 0.29 psi / ± 0.02 bar
- Resolution: 1 Pa / 0.000145 psi / 0.00001 bar
- Accuracy: ± 0.5% of final value
- Min and Max value memory 
- Data logger and leak test 
- Temperature measurement, flow measurement

The HVAC meter PCE-PDA 1L is a reliable differential pressure gauge for pressure measurement of gasses in the range of ± 2 kPa. The HVAC meter PCE-PDA 1L has many different pressure measuring functions.

- Measuring range: ± 2000 Pa  / ± 0.29 psi / ± 0.02 bar
- Resolution: 1 Pa / 0.000145 psi / 0.00001 bar
- Accuracy: ± 0.5% of final value
- Min and Max value memory 
- Data logger and leak test 
- Temperature measurement, flow measurement

The manometer PCE-PDA 1L is a reliable differential pressure gauge for pressure measurement of gasses in the range of ± 2 kPa. The manometer PCE-PDA 1L has many different pressure measuring functions.

- Measuring range: ± 2000 Pa  / ± 0.29 psi / ± 0.02 bar
- Resolution: 1 Pa / 0.000145 psi / 0.00001 bar
- Accuracy: ± 0.5% of final value
- Min and Max value memory 
- Data logger and leak test 
- Temperature measurement, flow measurement

The manometer PCE-PDA 1L is a reliable differential pressure gauge for pressure measurement of gasses in the range of ± 2 kPa. The manometer PCE-PDA 1L has many different pressure measuring functions. 

- Measuring range: ± 2000 Pa  / ± 0.29 psi / ± 0.02 bar
- Resolution: 1 Pa / 0.000145 psi / 0.00001 bar
- Accuracy: ± 0.5% of final value
- Min and Max value memory 
- Data logger and leak test 
- Temperature measurement, flow measurement

The pressure gauge PCE-PDA 1L is a reliable differential pressure gauge for pressure measurement of gasses in the range of ± 2 kPa. The pressure gauge PCE-PDA 1L has many different pressure measuring functions.

- Measuring range: ± 2000 Pa  / ± 0.29 psi / ± 0.02 bar
- Resolution: 1 Pa / 0.000145 psi / 0.00001 bar
- Accuracy: ± 0.5% of final value
- Min and Max value memory 
- Data logger and leak test 
- Temperature measurement, flow measurement

The pressure meter PCE-PDA 1L is a reliable differential pressure gauge for pressure measurement of gasses in the range of ± 2 kPa. The pressure meter PCE-PDA 1L has many different pressure measuring functions.

- Measuring range: ± 2000 Pa  / ± 0.29 psi / ± 0.02 bar
- Resolution: 1 Pa / 0.000145 psi / 0.00001 bar
- Accuracy: ± 0.5% of final value
- Min and Max value memory 
- Data logger and leak test 
- Temperature measurement, flow measurement

PCE-123 is a current calibrator used to test and calibrate a variety of measuring instruments. Offering a high level of accuracy for an affordable price, this easy-to-use current calibrator provides electrical (mA, mV, V and frequency in Hz) and temperature (in °C or °F) output signals, making the current calibrator useful in a wide range of applications.

- DC current: 4 - 20-mA (1 kΩ load, 24 V loop supply) with 1 μA resolution
- DC voltage: 0 - 100.00 mV, 0 - 1.000V, 0 - 12.000V
- K, J, E, T type thermocouples (°C or °F)
- Frequency: 1 - 62,500 Hz
- Incl. ISO Calibration Certificate

The data logging condition monitoring device is used to determine volume. The PCE-NDL 10 data logging condition monitoring device is a handy measuring device that meets the highest requirements. In order to evaluate the measured data in the best possible way, it is possible to use the internal measurement data memory on the noise dosimeter. In addition, the data logging condition monitoring device has an SD card slot that enables the use of an SD card as an additional storage medium.

- Measuring range: SPL: Auto 30 ... 130 dB
- Resolution: 0.1 dB
- Low sampling rate
- Automatic or manual storage
- Selectable storage interval
- Backlit LC display
- Dose measurement or SPL measurement

The data logging sound level meter is used to determine volume. The PCE-NDL 10 data logging sound level meter is a handy measuring device that meets the highest requirements. In order to evaluate the measured data in the best possible way, it is possible to use the internal measurement data memory on the noise dosimeter. In addition, the data logging sound level meter has an SD card slot that enables the use of an SD card as an additional storage medium.

- Measuring range: SPL: Auto 30 ... 130 dB
- Resolution: 0.1 dB
- Low sampling rate
- Automatic or manual storage
- Selectable storage interval
- Backlit LC display
- Dose measurement or SPL measurement

The data-logging decibel meter is used to determine volume. The PCE-NDL 10 data-logging decibel meter is a handy measuring device that meets the highest requirements. In order to evaluate the measured data in the best possible way, it is possible to use the internal measurement data memory on the noise dosimeter. In addition, the data-logging decibel meter has an SD card slot that enables the use of an SD card as an additional storage medium.

- Measuring range: SPL: Auto 30 ... 130 dB
- Resolution: 0.1 dB
- Low sampling rate
- Automatic or manual storage
- Selectable storage interval
- Backlit LC display
- Dose measurement or SPL measurement

The data-logging noise meter / sound meter  is used to determine volume. The PCE-NDL 10 data-logging noise meter / sound meter is a handy measuring device that meets the highest requirements. In order to evaluate the measured data in the best possible way, it is possible to use the internal measurement data memory on the noise dosimeter. In addition, the data-logging noise meter / sound meter has an SD card slot that enables the use of an SD card as an additional storage medium.

- Measuring range: SPL: Auto 30 ... 130 dB
- Resolution: 0.1 dB
- Low sampling rate
- Automatic or manual storage
- Selectable storage interval
- Backlit LC display
- Dose measurement or SPL measurement