Industrial Measurement Products and Solutions
Order no.: Gasman-NO2

The Air Quality Meter Gasman-NO2 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Air Quality Meter warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Air Quality Meter fulfills all the European and international norms, even ATEX and UL standards.


- Non-rechargeable, 1-year battery
- For NO2 (Nitrogen Dioxide)
- Dust and water resistant - IP 65/67
- 0 ... 10 ppm

 

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: Gasman-NO2

The Gas Leak Detector Gasman-NO2 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Gas Leak Detector warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Gas Leak Detector fulfills all the European and international norms, even ATEX and UL standards.


- Non-rechargeable, 1-year battery
- For NO2 (Nitrogen Dioxide)
- Dust and water resistant - IP 65/67
- 0 ... 10 ppm

 

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: Gasman-CL2

The Air Quality Meter Gasman-CLis a unique gas meter which protects against a specific gas, inflammable or toxic. The Air Quality Meter warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Air Quality Meter fulfills all the European and international norms, even ATEX and UL standards.

  • Non-rechargeable, 1-year battery
  • For CL2 (Chlorine)
  • Dust and water resistant - IP 65/67
  • 0 ... 5 ppm
Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: Gasman-CL2

The Gas Leak Detector Gasman-CL2is a unique gas meter which protects against a specific gas, inflammable or toxic. The Gas Leak Detector warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Gas Leak Detector fulfills all the European and international norms, even ATEX and UL standards.


- Non-rechargeable, 1-year battery
- For CL2 (Chlorine)
- Dust and water resistant - IP 65/67
- 0 ... 5 ppm

 

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: PM1208M

The geiger counter PM1208M combines a geiger counter for gamma rays with the design and functionality of a modern wrist watch and was designed for the continuous monitoring of the environmental radiation level. The degree of radiation is shown on the display of the geiger counter as dose equivalent and dose equivalent rate. If the specified threshold levels are exceeded, the geiger counter gives out an acoustic signal.

- Gamma ray detector and time keeper
- Dose equivalent range: 0.001 - 9999.99 mSv
- Dose equivalent rate range: 0.01 - 9999.99 µSv/h
- Energy range: 0.06 - 1.5 MeV
- Internal memory for up to 500 measurements

 

Manufacturer: UAB "Polimaster Instruments"
Test Instruments manufacturer
Order no.: PM1208M

The radiation detector PM1208M combines a geiger counter for gamma rays with the design and functionality of a modern wrist watch and was designed for the continuous monitoring of the environmental radiation level. The degree of radiation is shown on the display of the radiation detector as dose equivalent and dose equivalent rate. If the specified threshold levels are exceeded, the radiation detector gives out an acoustic signal.

- Gamma ray detector and time keeper
- Dose equivalent range: 0.001 - 9999.99 mSv
- Dose equivalent rate range: 0.01 - 9999.99 µSv/h
- Energy range: 0.06 - 1.5 MeV
- Internal memory for up to 500 measurements

 

Manufacturer: UAB "Polimaster Instruments"
Test Instruments manufacturer
Order no.: PM1208M

The radiation meter PM1208M combines a geiger counter for gamma rays with the design and functionality of a modern wrist watch and was designed for the continuous monitoring of the environmental radiation level. The degree of radiation is shown on the display of the radiation meter as dose equivalent and dose equivalent rate. If the specified threshold levels are exceeded, the radiation meter gives out an acoustic signal.

- Gamma ray detector and time keeper
- Dose equivalent range: 0.001 - 9999.99 mSv
- Dose equivalent rate range: 0.01 - 9999.99 µSv/h
- Energy range: 0.06 - 1.5 MeV
- Internal memory for up to 500 measurements

 

Manufacturer: UAB "Polimaster Instruments"
Test Instruments manufacturer
Order no.: PM1208M

The radioactivity meter PM1208M combines a geiger counter for gamma rays with the design and functionality of a modern wrist watch and was designed for the continuous monitoring of the environmental radiation level. The degree of radiation is shown on the display of the radioactivity meter as dose equivalent and dose equivalent rate. If the specified threshold levels are exceeded, the radioactivity meter gives out an acoustic signal.

- Gamma ray detector and time keeper
- Dose equivalent range: 0.001 - 9999.99 mSv
- Dose equivalent rate range: 0.01 - 9999.99 µSv/h
- Energy range: 0.06 - 1.5 MeV
- Internal memory for up to 500 measurements

 

Manufacturer: UAB "Polimaster Instruments"
Test Instruments manufacturer
Order no.: PCE-MPC 20
The air quality meter PCE-MPC 20 is a particle counter that measures the particles in the atmosphere. The measurable particle sizes in the particle collector are 0.3, 2.5 and 10 μm.

- Measurable particle sizes: PM2.5 / PM10
- Measuring range Mass concentration: 0 ... 2000 μg / m³
- Measurable particle sizes: 0.3, 2.5 and 10 μm
- Display with graphic real-time diagram
- Data memory up to 5000 data sets
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MPC 20
The air quality monitoring particle counter PCE-MPC 20 is a particle counter that measures the particles in the atmosphere. The measurable particle sizes in the particle collector are 0.3, 2.5 and 10 μm.

- Measurable particle sizes: PM2.5 / PM10
- Measuring range Mass concentration: 0 ... 2000 μg / m³
- Measurable particle sizes: 0.3, 2.5 and 10 μm
- Display with graphic real-time diagram
- Data memory up to 5000 data sets
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MPC 20
The air sampler PCE-MPC 20 is a particle counter that measures the particles in the atmosphere. The measurable particle sizes in the particle collector are 0.3, 2.5 and 10 μm.

- Measurable particle sizes: PM2.5 / PM10
- Measuring range Mass concentration: 0 ... 2000 μg / m³
- Measurable particle sizes: 0.3, 2.5 and 10 μm
- Display with graphic real-time diagram
- Data memory up to 5000 data sets
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MPC 20
The airborne particle-counting hygiene meter PCE-MPC 20 is a particle counter that measures the particles in the atmosphere. The measurable particle sizes in the particle collector are 0.3, 2.5 and 10 μm.

- Measurable particle sizes: PM2.5 / PM10
- Measuring range Mass concentration: 0 ... 2000 μg / m³
- Measurable particle sizes: 0.3, 2.5 and 10 μm
- Display with graphic real-time diagram
- Data memory up to 5000 data sets
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RVI 1

PCE-RVI 1 is an analogue viscometer or dial reading viscometer used in industrial and research applications to measure the viscosity of fluids such as paints, lacquers, inks, pastes, adhesives, plastics, greases and liquid food products. Under identical conditions, test results from an analogue viscometer are as accurate and reproducible as results from a digital viscometer. Thus, the PCE-RVI 1 analogue viscometer offers an affordable solution for viscosity measurement during product and material testing, development, production and quality control.


- Rotational speed: 6, 12, 30, and 60 rpm
- Viscosity range: 10 ... 100,000 mPa.s / cP
- Accuracy: ±5 % full scale (FS) in Newtonian fluids

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 320HR

PCE-VE 320HR is an automotive tester, borescope, inspection camera or endoscope for the non-destructive inspection (NDI) of engines, machines and more. This industrial borescope is an ideal tool for diagnosing issues in hard-to-reach places. The waterproof camera head features 6 LED lights (4 front, 2 side) for better illumination. In addition, digital image magnification or zoom of up to 2 times is available, plus boost function for improved image quality in the dark.

 

- Diameter camera head: Ø 5.5mm / 0.22"
- Cable length: 1 m / 3ft 3"
- With boost function: better images in dark surroundings
- 2 additional side LEDs for better lighting
- Image rotation possible
- Interface: Mini-USB 1.1 und AV out
- Memory: 8 GB SD memory card (incl.)

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MPC 20
The dust measuring device PCE-MPC 20 is a particle counter that measures the particles in the atmosphere. The measurable particle sizes in the particle collector are 0.3, 2.5 and 10 μm.

- Measurable particle sizes: PM2.5 / PM10
- Measuring range Mass concentration: 0 ... 2000 μg / m³
- Measurable particle sizes: 0.3, 2.5 and 10 μm
- Display with graphic real-time diagram
- Data memory up to 5000 data sets
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MPC 20
The dust monitor PCE-MPC 20 is a particle counter that measures the particles in the atmosphere. The measurable particle sizes in the particle collector are 0.3, 2.5 and 10 μm.

- Measurable particle sizes: PM2.5 / PM10
- Measuring range Mass concentration: 0 ... 2000 μg / m³
- Measurable particle sizes: 0.3, 2.5 and 10 μm
- Display with graphic real-time diagram
- Data memory up to 5000 data sets
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 320HR

The PCE-VE 320HR is an industrial borescope, inspection device or industrial endoscope camera for the non-destructive inspection (NDI) of engines, machines and more. This industrial borescope is an ideal tool for diagnosing issues in hard-to-reach places. The waterproof camera head of this kind of borescope features 6 LED lights (4 front, 2 side) for better illumination. In addition, digital image magnification or zoom of up to 2 times is available, plus boost function for improved image quality in the dark.


- Diameter camera head: Ø 5.5mm / 0.22"
- Cable length: 1 m / 3ft 3"
- With boost function: better images in dark surroundings
- 2 additional side LEDs for better lighting
- Image rotation possible
- Interface: Mini-USB 1.1 und AV out
- Memory: 8 GB SD memory card (incl.)

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 320HR

PCE-VE 320HR is an inspection camera or borescope for the non-destructive inspection (NDI) of engines, machines and more. This industrial borescope is an ideal tool for diagnosing issues in hard-to-reach places. The waterproof camera head features 6 LED lights (4 front, 2 side) for better illumination. In addition, digital image magnification or zoom of up to 2 times is available, plus boost function for improved image quality in the dark.

 

- Diameter camera head: Ø 5.5mm / 0.22"
- Cable length: 1 m / 3ft 3"
- With boost function: better images in dark surroundings
- 2 additional side LEDs for better lighting
- Image rotation possible
- Interface: Mini-USB 1.1 und AV out
- Memory: 8 GB SD memory card (incl.)

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-ITE 50

The PCE-ITE 50 is a robust insulation tester with a large 3.5" TFT color LCD display. The insulation tester PCE-ITE 50 also offers, in addition to the various measuring modes such as insulation resistance, grounding resistance, loop impedance, voltage, low-impedance measurement and RCD test with the camera function, the possibility of documenting suitable photos with the measurements.


- 3.5" color TFT LCD display
- Loop resistance L-N, L-PE and N-PE
- Adjustable FI test current
- SD card and Bluetooth
- Dual display
- Good / bad FI test
- Low Ohm measurement
- Up to 1000V terminal voltage

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 320HR

PCE-VE 320HR is a snake camera, inspection camera or borescope for the non-destructive inspection (NDI) of engines, machines and more. This industrial borescope is an ideal tool for diagnosing issues in hard-to-reach places.


- Diameter camera head: Ø 5.5mm / 0.22"
- Cable length: 1 m / 3ft 3"
- With boost function: better images in dark surroundings
- 2 additional side LEDs for better lighting
- Image rotation possible
- Interface: Mini-USB 1.1 und AV out
- Memory: 8 GB SD memory card (incl.)

Manufacturer: PCE Instruments
Test Instruments manufacturer