PCE-VE 330N is a videoscope, borescope, inspection camera or industrial endoscope for the non-destructive inspection (NDI) of engines, machines and more. This industrial borescope is an ideal tool for diagnosing issues in hard-to-reach places. The waterproof camera head features 4 LED lights with automatic illumination. In addition, digital image magnification or zoom of up to 2 times is available.

- Diameter camera head: Ø 5.5mm / 0.22"
- Interface: Mini-USB 1.1 and AV out
- Memory: 8 GB SD memory card (incl.)
- Cable length: 2 m / 6ft 6"

The Air Quality Meter Gasman-NH3 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Air Quality Meter warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Air Quality Meter fulfills all the European and international norms, even ATEX and UL standards.

- Non-rechargeable, 1-year battery
- For NH₃ (Ammonia Gas)
- Dust and water resistant - IP 65/67
- 0 ... 100 ppm

The ozone meter AQ-SM 70, which is fixed to the wall, has been developed for the measurement and monitoring of gas by activating an internal switch.

- Measurement of ozone and VOC
- Continuous monitoring
- Large, easy to read display
- Different variations selectable!

The infrared thermometer Hi Temp 2400 measures surface temperatures over a wide temperature range. Additional notable benefits of the infrared thermometer are its very short reaction time (< 1 sec.) and the non-contact IR technology. This infrared thermometer (as all the test instruments) is delivered manufacturer calibrated and can additionally be certified to ISO.

- Measuring range: 200 ... 2400°C / 392 ... 4352°F
- Spectral range: 1.1 - 3.7 µm
- Resolution:  0.1°C / 0.18°F (<1000°C / 1832°F), 1°C / 1.8°F (1000°C / 1832°F)
- Accuracy: ±2 % or 2°C / 3.6°F, whichever is larger

The Pyrometer Hi Temp 2400 measures surface temperatures over a wide temperature range. Additional notable benefits of the pyrometer are its very short reaction time (< 1 sec.) and the non-contact IR technology. This infrared thermometer (as all the test instruments) is delivered manufacturer calibrated and can additionally be certified to ISO.

- Measuring range: 200 ... 2400°C / 392 ... 4352°F
- Spectral range: 1.1 - 3.7 µm
- Resolution:  0.1°C / 0.18°F (<1000°C / 1832°F), 1°C / 1.8°F (1000°C / 1832°F)
- Accuracy: ±2 % or 2°C / 3.6°F, whichever is larger

The Temperature Meter Hi Temp 2400 measures surface temperatures over a wide temperature range. Additional notable benefits of the Temperature Meter are its very short reaction time (< 1 sec.) and the non-contact IR technology. This Temperature Meter (as all the test instruments) is delivered manufacturer calibrated and can additionally be certified to ISO.

- Measuring range: 200 ... 2400°C / 392 ... 4352°F
- Spectral range: 1.1 - 3.7 µm
- Resolution:  0.1°C / 0.18°F (<1000°C / 1832°F), 1°C / 1.8°F (1000°C / 1832°F)
- Accuracy: ±2 % or 2°C / 3.6°F, whichever is larger

The infrared thermometer Hi Temp 2400 measures surface temperatures over a wide temperature range. Additional notable benefits of the infrared thermometer are its very short reaction time (< 1 sec.) and the non-contact IR technology. This infrared thermometer (as all the test instruments) is delivered manufacturer calibrated and can additionally be certified to ISO.

- Measuring range: 200 ... 2400°C / 392 ... 4352°F
- Spectral range: 1.1 - 3.7 µm
- Resolution:  0.1°C / 0.18°F (<1000°C / 1832°F), 1°C / 1.8°F (1000°C / 1832°F)
- Accuracy: ±2 % or 2°C / 3.6°F, whichever is larger

The PCE-DDA 10 shore durometer is an ergonomic device to check Shore hardness in gum, plastic and other non-metallic materials. It has been designed with a very high quality. The PCE-DDA 10 durometer is mainly used for soft gums, elastomers, natural rubber, neoprenes, casting resin, white PVC, leather, etc. It has a reading accuracy of 0.1 hardness units.

- Handheld device
- For Shore A measurements
- Single and Serial Measurements
- Data transfer to pc
- Incl. ISO Calibration Certificate

PCE-SW 1500N is a portable battery-powered industrial floor scale or pallet scale featuring two heavy-duty parallel weighing beams made of lacquered steel that can be positioned up to 4 m / 13 ft apart. Thus, the adjustable width accommodates multiple pallet, box and container sizes. In addition, the scale's stainless-steel-encased display can be placed up to 5 m / 16 ft away from the weighing beams, allowing for wall mounting.

- Weighing capacity: 1500 kg / 3306 lb (=1.65 T)
- Weighing units: kilograms (kg) or pounds (lbs)
- Resolution: 0.5 kg
- Accuracy: ± 2 kg
- Bi-directional RS-232 interface

The PCE-DDA 10 shore hardness tester is an ergonomic device to check Shore hardness in gum, plastic and other non-metallic materials. It has been designed with a very high quality. The PCE-DDA 10 hardness tester is mainly used for soft gums, elastomers, natural rubber, neoprenes, casting resin, white PVC, leather, etc. It has a reading accuracy of 0.1 hardness units.

- Handheld device
- For Shore A measurements
- Single and Serial Measurements
- Data transfer to pc
- Incl. ISO Calibration Certificate

PCE-SW 1500N is a portable battery-powered industrial floor scale or pallet scale featuring two heavy-duty parallel pallet beams made of lacquered steel that can be positioned up to 4 m / 13 ft apart. Thus, the adjustable width accommodates multiple pallet, box and container sizes. In addition, the scale's stainless-steel-encased display can be placed up to 5 m / 16 ft away from the pallet beams, allowing for wall mounting.

- Weighing capacity: 1500 kg / 3306 lb (=1.65 T)
- Weighing units: kilograms (kg) or pounds (lbs)
- Resolution: 0.5 kg
- Accuracy: ± 2 kg
- Bi-directional RS-232 interface 

PCE-SW 1500N is a portable industrial scale or industrial pallet scale featuring two heavy-duty parallel weighing beams made of lacquered steel that can be positioned up to 4 m / 13 ft apart. Thus, the adjustable width accommodates multiple pallet, box and container sizes. In addition, the battery-powered industrial scale's stainless-steel-encased display can be placed up to 5 m / 16 ft away from the weighing beams, allowing for wall mounting.

- Weighing capacity: 1500 kg / 3306 lb (=1.65 T)
- Weighing units: kilograms (kg) or pounds (lbs)
- Resolution: 0.5
- Accuracy: ± 2 kg
- Bi-directional RS-232 interface

PCE-SW 1500N is a portable battery-powered industrial floor scale or pallet scale featuring two heavy-duty parallel weighing beams made of lacquered steel that can be positioned up to 4 m / 13 ft apart. Thus, the adjustable width accommodates multiple pallet, box and container sizes. In addition, the scale's stainless-steel-encased display can be placed up to 5 m / 16 ft away from the weighing beams, allowing for wall mounting.

- Weighing capacity: 1500 kg / 3306 lb (=1.65 T)
- Weighing units: kilograms (kg) or pounds (lbs)
- Resolution: 0.5 kg
- Accuracy: ± 2 kg
- Bi-directional RS-232 interface 

The PCE-CT 5000 Automotive Tester is an instrument for a nondestructive thickness measurement of coatings, such as varnishes, paints, etc. on steel / iron and non-ferrous metals. The extremely wide measuring range of the Automotive Tester goes up to 5000 µm or 200 mils. Gumming or plastic coatings for shock and impact protection can be controlled just as the thin paint coatings.

- Measuring range: 0 ... 5000 µm / 0 ... 196.8 mils
- Ferrous metals (Fe)
- Non-ferrous metals (NFe)
- Accuracy: ± 2 % or 2.5 µm / 0.1 mils (the highest value is valid)
- incl. ISO Calibration Certificate

The PCE-CT 5000 Coating Thickness Gauge is an instrument for a nondestructive thickness measurement of coatings, such as varnishes, paints, etc. on steel / iron and non-ferrous metals. The extremely wide measuring range of the Coating Thickness Gauge goes up to 5000 µm or 200 mils. Gumming or plastic coatings for shock and impact protection can be controlled just as the thin paint coatings.

- Measuring range: 0 ... 5000 µm / 0 ... 196.8 mils
- Ferrous metals (Fe)
- Non-ferrous metals (NFe)
- Accuracy: ± 2 % or 2.5 µm / 0.1 mils (the highest value is valid)
- incl. ISO Calibration Certificate 

The contact thermometer PCE-HMM 200 is a professional device to designed to determine moisture and temperature of pressed hay and straw. The hay contact thermometer features a sensor made of stainless steel, which can be purchased in four different lengths, while the wooden handle has an ergonomic design. The hay contact thermometer proves to be extremely robust, designed to withstand applications for many years.

- Measuring lance: 200 cm
- Measuring range moisture: 9 ... 50%
- Measuring range temperature: -10 ... 100°C / 14 ... 212°F
- Resolution of display: 0.1%
- Accuracy: 0.8%

The hay digital thermometer PCE-HMM 200 is a professional device to designed to determine moisture and temperature of pressed hay and straw. The hay digital thermometer features a sensor made of stainless steel, which can be purchased in four different lengths, while the wooden handle has an ergonomic design. The hay digital thermometer proves to be extremely robust, designed to withstand applications for many years.

- Measuring lance: 200 cm
- Measuring range moisture: 9 ... 50%
- Measuring range temperature: -10 ... 100°C / 14 ... 212°F
- Resolution of display: 0.1%
- Accuracy: 0.8%