The PCE-228WINE pH meter is a very easy-to-use handheld pH / mV / °C meter. The pH value and the temperature can be saved directly on the SD card (Excel file) or transferred directly from the pH meter to a PC via the RS-232 interface.

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Accuracy: ± (0.02 pH + 2d)
- Memory: flexible via SD card memory 1 ... 16 GB
- Interface: RS-232
- Especially for wine, beer and other solutions with low conductivity

The Wood Moisture Meter FMC can accurately measure absolute humidity in diverse building materials. To detect humidity, the FMC Wood Moisture Meter has a connection for external sensors which can either be inserted into the building material or placed on it.

- Measuring range: 5-99% wood / 0-99% building materials
- Resolution: 0.1 %
- Accuracy: ±0.3 %
- Sensor not included
- External probe
- For wood, paper and building materials

The Durometer is a handy, digital measuring device for measuring tensile and compressive forces. The Durometer offers a sampling rate of 500 Hz and various measurement options such as real-time measurement (RT), maximum value measurement (PEAK), configurable average value acquisition (Average) and automatic measurement storage of up to 100 measurements.

- Measuring range: 0 ... 10 N
- Resolution: 0,002 N
- Accuracy: ± 0.3% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display

- Measuring range: 0 ... 10 N
- Resolution: 0,002 N
- Accuracy: ± 0.3% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display

The force gauge is a handy, digital measuring device for measuring tensile and compressive forces. The force gauge offers a sampling rate of 500 Hz and various measurement options such as real-time measurement (RT), maximum value measurement (PEAK), configurable average value acquisition (Average) and automatic measurement storage of up to 100 measurements.

- Measuring range: 0 ... 10 N
- Resolution: 0,002 N
- Accuracy: ± 0.3% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display

The belt tension meter is an optical measuring instrument for determining the belt tension force. This belt tension meter consists of a display unit and a sensor on a gooseneck cable. The belt tension meter measures the tension of the belt in a stationary state.

- Measures the oscillation frequency of the belt
- Measuring range: 10 ... 900 Hz
- Accuracy: ± (1% of rdg. + 4 digits)
- Resolution: <100 Hz: 0.1 Hz
                       >100 Hz: 1 Hz
- Memory for 750 measured values
- Length of gooseneck sensor 16 cm

- Measures the oscillation frequency of the belt
- Measuring range: 10 ... 900 Hz
- Accuracy: ± (1% of rdg. + 4 digits)
- Resolution: <100 Hz: 0.1 Hz
                       >100 Hz: 1 Hz
- Memory for 750 measured values
- Length of gooseneck sensor 16 cm

The force gauge / belt tension meter is an optical measuring instrument for determining the belt tension force. This force measuring device consists of a display unit and a sensor on a gooseneck cable. The force gauge measures the tension of the belt in a stationary state.

- Measures the oscillation frequency of the belt
- Measuring range: 10 ... 900 Hz
- Accuracy: ± (1% of rdg. + 4 digits)
- Resolution: <100 Hz: 0.1 Hz
                       >100 Hz: 1 Hz
- Memory for 750 measured values
- Length of gooseneck sensor 16 cm

The swimming pool pH meter kit is a very easy to use measuring device for determining the pH value in various liquids. With the help of the BNC connection of the pH meter, various pH electrodes can also be connected to the pH meter. The turbidity meter is a handy meter with a large display that meets all the requirements for on-site turbidity measurement.

- Measuring range: 0.00 ... 14.00 pH
- Measurement accuracy: ± 0.1 pH (at 20°C / 68°F), ± 0.2 pH
- Resolution: 0.01 pH
- Exchangeable electrode through BNC connection
- Device kit for outdoor swimming pools
- Incl. turbidity meter PCE-TUM 20
- Measuring range: 0.00 to 50.0 NTU and 50 to 1000 NTU
- Resolution: 0.01 and 1 NTU

HVACR tester for visual inspection in small and narrow holes and cavities. With a diameter of 4 mm and a length of 175 or 432 mm / 6.9 or 17 in this HVACR tester is very versatile. The integrated LED lamp allows for a very good illumination of cavities to be inspected.

- Diameter only 4 mm / 0.16 in
- Useful length 175 or 432 mm / 6.9 or 17 in
- LED lighting
- Battery operation

 

Rigid Inspection Camera for visual inspection in small and narrow holes and cavities. With a diameter of 4 mm and a length of 175 or 432 mm / 6.9 or 17 in this rigid Inspection Camera is very versatile. The integrated LED lamp allows for a very good illumination of cavities to be inspected.

- Diameter only 4 mm / 0.16 in
- Useful length 175 or 432 mm / 6.9 or 17 in
- LED lighting
- Battery operation

 

HVACR tester for visual inspection in small and narrow holes and cavities. With a diameter of 4 mm and a length of 175 or 432 mm / 6.9 or 17 in this HVACR tester is very versatile. The integrated LED lamp allows for a very good illumination of cavities to be inspected.

- Diameter only 4 mm / 0.16 in
- Useful length 175 or 432 mm / 6.9 or 17 in
- LED lighting
- Battery operation

 

- Pipe sizes: DN 15 ... 100 / 20 ... 108 mm / 0.6 ... 3.9 / 0.7 ... 4.2"

- Important! If you order the sensor at a later date, we require the PCE-TDS 200 hand-held unit,
   in order to match the sensor to the hand-held unit!

The pressure transmitter PCE-DMU 40 can be used for relative and absolute pressure measurements. The pressure transmitter can be used for gases, water as well as fuels and oils.

 

- max. 600 Bar
- Media: gases, water as well as fuels and oil
- Output: 4 ... 20 mA / 0 ... 10 V (selectable)
- Pressure type: Absolute or Relative (selectable)
- Membrane: stainless steel
- Accuracy: 0.1 % / 0.25 % FSO

A rigid industrial borescope for visual inspection in small and narrow holes and cavities for example in aviation industry. With a diameter of only 4 mm and a length of 175 or 432 mm / 6.9 or 17 in this rigid industrial borescope is very versatile. The integrated LED lamp allows for a very good illumination of cavities to be inspected. The robust and compact design of this type of industrial borescope is very good for use in routine inspections in various industries as in the automotive industry.

- Diameter only 4 mm / 0.16 in
- Useful length 175 or 432 mm / 6.9 or 17 in
- LED lighting
- Battery operation

 

The pressure / fill level sensor is based on a ceramic measuring cell. This level sensor was developed for the measurement of levels in waste water, polluted and highly viscous media. As a special feature of this level sensor, the probe and cable part can be separated from one another.

- Nominal pressures up to 100 mH2O
- Accuracy ± 0.35% of the measuring range
- 39.5 mm diameter
- Suitable for sewage, fuels and water
- Ceramic sensor
- Different configurations possible