Order no.: PCE-DDO 10

The PCE-DDO 10 shore durometer is an ergonomic device to check Shore hardness in gum. It has been designed with a high quality. The PCE-DDO 10 durometer is mainly used for soft gums. If the material thickness is not enough, it should be tightened on the back with the same material in order to increase its thickness.


- Handheld device
- For Shore O measurements
- Single and Serial-Measurements
- Data transfer to PC

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-GM 55
The Gloss Meter PCE-GM 55 is a 3-angle glossmeter. The measuring angles of the gloss meter are 20°, 45° and 75°. This allows the gloss meter to be used for gloss measurements in the high gloss and medium gloss ranges. The special measuring angle of 75° allows, among other things, measurements of the degree of gloss on paper and textiles.

- Range : 0 ... 200 gloss units / highlights
- Accuracy: ± 1 gloss units
- Repeatability: ± 0.5 gloss units
- Optical angle: 20°, 45°, 75°
- For medium and high gloss
- Measurements on textiles and paper possible
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DDO 10

The PCE-DDO 10 hardness tester is an ergonomic device to check Shore O hardness in gum. It has been designed with a high quality. The PCE-DDO 10 hardness tester is mainly used for soft gums. If the material thickness is not enough, it should be tightened on the back with the same material in order to increase its thickness.


- Handheld device
- For Shore O measurements
- Single and Serial-Measurements
- Data transfer to PC

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PDA 01L

The HVAC meter PCE-PDA 01L is a reliable differential pressure gauge for pressure measurement of gases in the range of ± 200 Pa. The HVAC meter PCE-PDA 01L has many different pressure measuring functions.


- Measuring range: ± 200 Pa  / 0.029 psi / 0.002 bar
- Resolution: 0.1 Pa / 0.0000145 psi / 0.000001 bar
- Accuracy: ± 1% of final value
- Min and Max value memory
- Data logger and leak test
- Temperature measurement, flow measurement

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 330N

The PCE-VE 330N is an industrial borescope, inspection camera or industrial endoscope for the non-destructive inspection (NDI) of engines, machines and more. This industrial borescope is an ideal tool for diagnosing issues in hard-to-reach places. The waterproof camera head features 4 LED lights with automatic illumination. In addition, digital image magnification or zoom of up to 2 times is available.

 

- Diameter camera head: Ø 5.5mm / 0.22"
- Interface: Mini-USB 1.1 and AV out
- Memory: 8 GB SD memory card (incl.)
- Cable length: 2 m / 6ft 6"

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 330N

PCE-VE 330N is an inspection camera, borescope or industrial endoscope for the non-destructive inspection (NDI) of engines, machines and more. This industrial borescope is an ideal tool for diagnosing issues in hard-to-reach places. The waterproof camera head features 4 LED lights with automatic illumination. In addition, digital image magnification or zoom of up to 2 times is available.


- Diameter camera head: Ø 5.5mm / 0.22"
- Interface: Mini-USB 1.1 and AV out
- Memory: 8 GB SD memory card (incl.)
- Cable length: 2 m / 6ft 6"

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PDA 01L

The manometer PCE-PDA 01L is a reliable differential pressure gauge for pressure measurement of gases in the range of ± 200 Pa. The manometer PCE-PDA 01L has many different pressure measuring functions.


- Measuring range: ± 200 Pa  / 0.029 psi / 0.002 bar
- Resolution: 0.1 Pa / 0.0000145 psi / 0.000001 bar
- Accuracy: ± 1% of final value
- Min and Max value memory
- Data logger and leak test
- Temperature measurement, flow measurement

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 80
The paint layer material tester PCE-CT 80 is a measuring device for the nondestructive measurement of coatings (paints, lacquers, plastics ...) on steel / iron and non-ferrous metals. Includes FN1.5 probe in kit for 0 ... 1500 μm or 0 ... 59 mils measurements. Optional sensors and sensors available under accessories tab.

- Measuring range of meter is Fe: 0 ... 5000 μm (0 ... 196.9 mils) / NFe: 0 ... 3000 μm (0 ... 118.1 mils)
- For many substrate materials such as Iron, Steel, Aluminum, Copper, Brass and Stainless Steel.
- Practical V-groove on the measuring sensor heads
- Wear-resistant, spring-mounted measuring head for precise measurement results 
- Includes ISO laboratory calibration with paper certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-GM 55
The NDT tester PCE-GM 55 is a 3-angle gloss meter. The measuring angles of the gloss meter are 20°, 45° and 75°. This allows the NDT tester to be used for gloss measurements in the high gloss and medium gloss ranges. The special measuring angle of 75° allows, among other things, measurements of the degree of gloss on paper and textiles.

- Range : 0 ... 200 gloss units / highlights
- Accuracy: ± 1 gloss units
- Repeatability: ± 0.5 gloss units
- Optical angle: 20°, 45°, 75°
- For medium and high gloss
- Measurements on textiles and paper possible
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 80
The paint layer paint gauge PCE-CT 80 is a measuring device for the nondestructive measurement of coatings (paints, lacquers, plastics ...) on steel / iron and non-ferrous metals. Includes FN1.5 probe in kit for 0 ... 1500 μm or 0 ... 59 mils measurements. Optional sensors and software available under accessories tab.

- Measuring range of meter is Fe: 0 ... 5000 μm (0 ... 196.9 mils) / NFe: 0 ... 3000 μm (0 ... 118.1 mils)
- For many substrate materials such as Iron, Steel, Aluminum, Copper, Brass and Stainless Steel.
- Incl. ISO laboratory calibration with certificate 
- Practical V-groove on the measuring sensor heads
- Wear-resistant, spring-mounted measuring head for precise measurement results
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PDA 01L

The pressure gauge PCE-PDA 01L is a reliable differential pressure gauge for pressure measurement of gases in the range of ± 200 Pa. The pressure gauge PCE-PDA 01L has many different pressure measuring functions.

- Measuring range: ± 200 Pa  / 0.029 psi / 0.002 bar
- Resolution: 0.1 Pa / 0.0000145 psi / 0.000001 bar
- Accuracy: ± 1% of final value
- Min and Max value memory
- Data logger and leak tester 
- Temperature measurement, flow measurement

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PDA 01L

The pressure meter PCE-PDA 01L is a reliable differential pressure gauge for pressure measurement of gasses in the range of ± 200 Pa. The pressure meter PCE-PDA 01L has many different pressure measuring functions.


- Measuring range: ± 200 Pa  / 0.029 psi / 0.002 bar
- Resolution: 0.1 Pa / 0.0000145 psi / 0.000001 bar
- Accuracy: ± 1% of final value
- Min and Max value memory
- Data logger and leak test
- Temperature measurement, flow measurement

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 330N

PCE-VE 330N is a snake camera, inspection camera or industrial endoscope for the non-destructive inspection (NDI) of engines, machines and more. This industrial snake camera is an ideal tool for diagnosing issues in hard-to-reach places.


- Diameter camera head: Ø 5.5mm / 0.22"
- Interface: Mini-USB 1.1 and AV out
- Memory: 8 GB SD memory card (incl.)
- Cable length: 2 m / 6ft 6"

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 80
The paint layer surface tester PCE-CT 80 is a measuring device for the nondestructive measurement of coatings (paints, lacquers, plastics ...) on steel / iron and non-ferrous metals. Includes FN1.5 probe in kit for 0 ... 1500 μm or 0 ... 59 mils measurements. Optional sensors and software available under accessories tab.

- Measuring range of meter is Fe: 0 ... 5000 μm (0 ... 196.9 mils) / NFe: 0 ... 3000 μm (0 ... 118.1 mils)
- For many substrate materials such as Iron, Steel, Aluminum, Copper, Brass and Stainless Steel.
- Incl. ISO laboratory calibration with certificate
- Practical V-groove on the measuring sensor heads
- Wear-resistant, spring-mounted measuring head for precise measurement results
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 330N

The PCE-VE 330N Video Fiberscope is an ideal tool for professionals, maintenance technicians and in development. The Video Fiberscope allows for visualisation of the interior of machines and installations without the need to dismantle them, to capture images and video sequences of moving components, save them to memory and later transfer these to a computer.


- Diameter camera head: Ø 5.5mm / 0.22"
- Interface: Mini-USB 1.1 and AV out
- Memory: 8 GB SD memory card (incl.)
- Cable length: 2 m / 6ft 6"

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-GM 55
The Gloss Meter PCE-GM 55 is a 3-angle glossmeter. The measuring angles of the gloss meter are 20°, 45° and 75°. This allows the gloss meter to be used for gloss measurements in the high gloss and medium gloss ranges. The special measuring angle of 75° allows, among other things, measurements of the degree of gloss on paper and textiles.

- Range : 0 ... 200 gloss units / highlights
- Accuracy: ± 1 gloss units
- Repeatability: ± 0.5 gloss units
- Optical angle: 20°, 45°, 75°
- For medium and high gloss
- Measurements on textiles and paper possible
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 80
The paint layer thickness gauge PCE-CT 80 is a measuring device for the nondestructive measurement of coatings (paints, lacquers, plastics ...) on steel / iron and non-ferrous metals. Includes FN1.5 probe in kit for 0 ... 1500 μm or 0 ... 59 mils measurements. Optional sensors and software available under accessories tab.

- Measuring range of meter is Fe: 0 ... 5000 μm (0 ... 196.9 mils) / NFe: 0 ... 3000 μm (0 ... 118.1 mils)
- For many substrate materials such as Iron, Steel, Aluminum, Copper, Brass and Stainless Steel.
- Practical V-groove on the measuring sensor heads
- Wear-resistant, spring-mounted measuring head for precise measurement results 
- Includes ISO laboratory calibration with paper certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 80
The paint layer thickness meter PCE-CT 80 is a measuring device for the nondestructive measurement of coatings (paints, lacquers, plastics ...) on steel / iron and non-ferrous metals. Includes FN1.5 probe in kit for 0 ... 1500 μm or 0 ... 59 mils measurements. Optional sensors and software available under accessories tab.

- Measuring range of meter is Fe: 0 ... 5000 μm (0 ... 196.9 mils) / NFe: 0 ... 3000 μm (0 ... 118.1 mils)
- For many substrate materials such as Iron, Steel, Aluminum, Copper, Brass and Stainless Steel.
- Practical V-groove on the measuring sensor heads
- Wear-resistant, spring-mounted measuring head for precise measurement results 
- Includes ISO laboratory calibration with paper certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 330N

PCE-VE 330N is a videoscope, borescope, inspection camera or industrial endoscope for the non-destructive inspection (NDI) of engines, machines and more. This industrial borescope is an ideal tool for diagnosing issues in hard-to-reach places. The waterproof camera head features 4 LED lights with automatic illumination. In addition, digital image magnification or zoom of up to 2 times is available.


- Diameter camera head: Ø 5.5mm / 0.22"
- Interface: Mini-USB 1.1 and AV out
- Memory: 8 GB SD memory card (incl.)
- Cable length: 2 m / 6ft 6"

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: Gasman-NH3

The Air Quality Meter Gasman-NH3 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Air Quality Meter warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Air Quality Meter fulfills all the European and international norms, even ATEX and UL standards.


- Non-rechargeable, 1-year battery
- For NH3 (Ammonia Gas)
- Dust and water resistant - IP 65/67
- 0 ... 100 ppm

 

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer