Order no.: PCE-VDR 10
PCE-VDR 10 is a single-axis accelerometer or vibration data logger monitor with real-time measurement and data logging capabilities. This vibration data logger records acceleration (m/s, g, ft/s) as well as velocity (mm/s, cm/s, in/s) measurements and saves the measured data to an included SD card memory. There is also an analog output, which makes this vibration data logger compatlble to control systems.
- Acceleration measuring range:
0.5 ... 199.9 m/s, 0.05 ... 20.39 g, 2 ... 656 ft/s
- Velocity measuring ranges:
0.5 ... 199.9 mm/s, 0.05 ... 19.99 cm/s, 0.02 ... 7.87 in/s
- Frequency range: 10 ... 1000 Hz
- Analog output: 4 ... 20 mA
- RS-232 and USB interface
Manufacturer: PCE Instruments
Order no.: PCE-VDR 10
PCE-VDR 10 is a single-axis vibration meter or monitor with real-time measurement and data logging capabilities. This vibration analyzer records acceleration (m/s, g, ft/s) as well as speed (mm/s, cm/s, in/s) measurements and saves the measured data to an included SD card memory.
- Acceleration measuring range:
0.5 ... 199.9 m/s, 0.05 ... 20.39 g, 2 ... 656 ft/s
- Speed measuring range:
0.5 ... 199.9 mm/s, 0.05 ... 19.99 cm/s, 0.02 ... 7.87 in/s
- Frequency range: 10 ... 1000 Hz
- Analog output: 4 ... 20 mA
- RS-232 and USB interface
Manufacturer: PCE Instruments
Order no.: PCE-N50F
The weight indicator PCE-N50F is suitable for panel mounting. This weight indicator PCE-N50F can be used to indicate the weight, force or torque. The decisive factor here is the type of sensor that is connected to the weight indicator PCE-N50F.
- Signal input range: 0 ... 20 mV
- Units: g, mN, mlb, Pa, kg, N, Ib, kPa, t, kN, klb, MPa
- For load cells, force sensors, etc.
- Up to 1600 Hz sampling rate
- LCD display
Manufacturer: PCE Instruments
Order no.: PCE-VE 200-KIT1
PCE-VE 200 is a borescope or inspection camera for nondestructive evaluation (NDE) and machine diagnostics. The PCE-VE 200 borescope provides excellent image quality at an affordable price. An ideal camera tool for diagnosing hard-to-reach places, the scope can be rotated 180° and offers 6 LED lights with adjustable intensity for optimal illumination. In addition, digital image magnification or zoom of up to 4 times is available.
Borescope
- 3.5 in LCD display
- 3.28 ft cable length
- 0.18 in camera cable diameter
- 1/8 in camera head / CMOS chip image sensor
- 640 x 480 pixels AVI video resolution
- Micro SD card memory
- Micro USB 2.0 and TV outputs
Air Flow Meter
The air flow meter PCE-VA 20-set is a measuring instrument for various wind related parameters. It has got an impeller diameter of ten centimeters. Moreover, if required, it is possible to order a set of flow hoods which provide a fast and reliable method which helps to use the 100 mm large impeller head optimally.
- incl. Flow hood
- 10 cm diameter impeller
- Backlight
- Automatic power off
- Extreme value measurement
- HOLD function
- Low battery indicator
Manufacturer: PCE Instruments
Order no.: PCE-GM 80-ICA
The gloss meter is equipped with an external gloss sensor. The measuring surface of Ø 4.5 mm of the gloss meter also contributes significantly to being able to carry out measurements on small surfaces that are difficult to access.
- Measurement geometry: 60°
- Measuring range up to 1000 GU
- Measuring surface: Ø 4.5 mm
- Data storage: 1245 measured values
- Interface: Micro USB
- Incl. ISO calibration certificate
- Measurement geometry: 60°
- Measuring range up to 1000 GU
- Measuring surface: Ø 4.5 mm
- Data storage: 1245 measured values
- Interface: Micro USB
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Order no.: PCE-VE 200-KIT1
The PCE-VE 200 is an industrial borescope or borescope camera for nondestructive evaluation (NDE) and machine diagnostics. This borescope provides excellent image quality at an affordable price. An ideal tool for diagnosing hard-to-reach places, the scope can be rotated 180 ° and offers 6 LED lights with adjustable intensity for optimal illumination. In addition, digital image magnification or zoom of up to 4 times is available.
Borescope
- 3.5 in LCD display
- 3.28 ft cable length
- 0.18 in cable diameter
- 1/8 in camera head / CMOS chip image sensor
- 640 x 480 pixels AVI video resolution
- Micro SD card memory
- Micro USB 2.0 and TV outputs
Air Flow Meter
The air flow meter PCE-VA 20-set is a measuring instrument for various wind related parameters. It has got an impeller diameter of ten centimeters. Moreover, if required, it is possible to order a set of flow hoods which provide a fast and reliable method which helps to use the 100 mm large impeller head optimally.
- incl. Flow hood
- 10 cm diameter impeller
- Backlight
- Automatic power off
- Extreme value measurement
- HOLD function
- Low battery indicator
Manufacturer: PCE Instruments
Order no.: PCE-VE 200-KIT1
PCE-VE 200 is a video inspection camera, for nondestructive evaluation (NDE) and machine diagnostics. The PCE-VE 200 video inspection camera provides excellent image quality at an affordable price. An ideal tool for diagnosing hard-to-reach places, the scope can be rotated 180 ° and offers 6 LED lights with adjustable intensity for optimal illumination. In addition, digital image magnification or zoom of up to 4 times is available.
Inspection Camera
- 3.5 in LCD display
- 3.28 ft cable length
- 0.18 in cable diameter
- 1/8 in camera head / CMOS chip image sensor
- 640 x 480 pixels AVI video resolution
- Micro SD card memory
- Micro USB 2.0 and TV outputs
Air Flow Meter
The air flow meter PCE-VA 20-set is a measuring instrument for various wind related parameters. It has got an impeller diameter of ten centimeters. Moreover, if required, it is possible to order a set of flow hoods which provide a fast and reliable method which helps to use the 100 mm large impeller head optimally.
- Incl. Flow hood
- 10 cm diameter impeller
- Backlight
- Automatic power off
- Extreme value measurement
- HOLD function
- Low battery indicator
Manufacturer: PCE Instruments
Order no.: PCE-GM 80-ICA
The NDT Tester - Gloss Meter is equipped with an external gloss sensor. The measuring surface of Ø 4.5 mm of the gloss meter also contributes significantly to being able to carry out measurements on small surfaces that are difficult to access.
- Measurement geometry: 60°
- Measuring range up to 1000 GU
- Measuring surface: Ø 4.5 mm
- Data storage: 1245 measured values
- Interface: Micro USB
- Incl. ISO calibration certificate
- Measurement geometry: 60°
- Measuring range up to 1000 GU
- Measuring surface: Ø 4.5 mm
- Data storage: 1245 measured values
- Interface: Micro USB
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Order no.: PCE-VE 200-KIT1
PCE-VE 200 is a snake camera or inspection camera for nondestructive evaluation (NDE) and machine diagnostics. The PCE-VE 200 snake camera provides excellent image quality at an affordable price. An ideal camera tool for diagnosing hard-to-reach places, the scope can be rotated 180° and offers 6 LED lights with adjustable intensity for optimal illumination. In addition, digital image magnification or zoom of up to 4 times is available.
Snake Camera
- 3.5 in LCD display
- 3.28 ft cable length
- 0.18 in camera cable diameter
- 1/8 in camera head / CMOS chip image sensor
- 640 x 480 pixels AVI video resolution
- Micro SD card memory
- Micro USB 2.0 and TV outputs
Air Flow Meter
The air flow meter PCE-VA 20-set is a measuring instrument for various wind related parameters. It has got an impeller diameter of ten centimeters. Moreover, if required, it is possible to order a set of flow hoods which provide a fast and reliable method which helps to use the 100 mm large impeller head optimally.
- incl. Flow hood
- 10 cm diameter impeller
- Backlight
- Automatic power off
- Extreme value measurement
- HOLD function
- Low battery indicator
Manufacturer: PCE Instruments
Order no.: PCE-VE 200-KIT1
PCE-VE 200 is a surface testing - automotive / borescope or inspection camera for nondestructive evaluation (NDE) and machine diagnostics. The PCE-VE 200 borescope provides excellent image quality at an affordable price. An ideal camera tool for diagnosing hard-to-reach places, the scope can be rotated 180° and offers 6 LED lights with adjustable intensity for optimal illumination. In addition, digital image magnification or zoom of up to 4 times is available.
Surface Testing - Automotive Tester / Borescope
- 3.5 in LCD display
- 3.28 ft cable length
- 0.18 in camera cable diameter
- 1/8 in camera head / CMOS chip image sensor
- 640 x 480 pixels AVI video resolution
- Micro SD card memory
- Micro USB 2.0 and TV outputs
Air Flow Meter
The air flow meter PCE-VA 20-set is a measuring instrument for various wind related parameters. It has got an impeller diameter of ten centimeters. Moreover, if required, it is possible to order a set of flow hoods which provide a fast and reliable method which helps to use the 100 mm large impeller head optimally.
- incl. Flow hood
- 10 cm diameter impeller
- Backlight
- Automatic power off
- Extreme value measurement
- HOLD function
- Low battery indicator
Manufacturer: PCE Instruments
Order no.: PCE-GM 80-ICA
The surface testing gloss meter is equipped with an external gloss sensor. The measuring surface of Ø 4.5 mm of the gloss meter also contributes significantly to being able to carry out measurements on small surfaces that are difficult to access.
- Measurement geometry: 60°
- Measuring range up to 1000 GU
- Measuring surface: Ø 4.5 mm
- Data storage: 1245 measured values
- Interface: Micro USB
- Incl. ISO calibration certificate
- Measurement geometry: 60°
- Measuring range up to 1000 GU
- Measuring surface: Ø 4.5 mm
- Data storage: 1245 measured values
- Interface: Micro USB
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Order no.: PCE-VE 200-KIT1
PCE-VE 200 is a videoscope or inspection camera for nondestructive evaluation (NDE) and machine diagnostics. The PCE-VE 200 videoscope provides excellent image quality at an affordable price. An ideal camera tool for diagnosing hard-to-reach places, the scope can be rotated 180° and offers 6 LED lights with adjustable intensity for optimal illumination. In addition, digital image magnification or zoom of up to 4 times is available.
Videoscope
- 3.5 in LCD display
- 3.28 ft cable length
- 0.18 in camera cable diameter
- 1/8 in camera head / CMOS chip image sensor
- 640 x 480 pixels AVI video resolution
- Micro SD card memory
- Micro USB 2.0 and TV outputs
Air Flow Meter
The air flow meter PCE-VA 20-set is a measuring instrument for various wind related parameters. It has got an impeller diameter of ten centimeters. Moreover, if required, it is possible to order a set of flow hoods which provide a fast and reliable method which helps to use the 100 mm large impeller head optimally.
- incl. Flow hood
- 10 cm diameter impeller
- Backlight
- Automatic power off
- Extreme value measurement
- HOLD function
- Low battery indicator
Manufacturer: PCE Instruments
Order no.: FMC
The Absolute Moisture Meter FMC can accurately measure absolute moisture in diverse building materials. To detect moisture, the test instrument has a connection for external sensors which can either be inserted into the building material or placed on it.
- Measuring range: 5-99% wood / 0-99% building materials
- Resolution: 0.1 % / Accuracy: ±0.3 %
- Sensor not included
- External probe
- For wood, paper and building materials
Manufacturer: Brookhuis Applied Technologies B.V.
Order no.: PCE-VT 3700
The accelerometer is ideal for maintenance workers to quickly check vibrating parts, machines and systems. This accelerometer shows the vibration acceleration, vibration velocity and vibration displacement directly on the display.
Measuring ranges
- Acceleration: 0.0 ... 399.9 m/s²
- Velocity: 0.00 ... 399.9 mm/s
- Displacement: 0.000 ... 3.9 mm
- Automatic ISO 10816-3 evaluation
- Colored graphic display
- Incl. ISO calibration certificate
Measuring ranges
- Acceleration: 0.0 ... 399.9 m/s²
- Velocity: 0.00 ... 399.9 mm/s
- Displacement: 0.000 ... 3.9 mm
- Automatic ISO 10816-3 evaluation
- Colored graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Order no.: FMC
The Concrete Moisture Meter FMC can accurately measure absolute humidity in diverse building materials. To detect humidity, the Concrete Moisture Meter has a connection for external sensors which can either be inserted into the building material or placed on it.
- Measuring range: 5-99% wood / 0-99% building materials
- Resolution: 0.1 %
- Accuracy: ±0.3 %
- Sensor not included
- External probe
- For wood, paper and building materials
Manufacturer: Brookhuis Applied Technologies B.V.
Order no.: PCE-VT 3700
The condition monitoring meter is ideal for maintenance workers to quickly check vibrating parts, machines and systems. This condition monitoring meter shows the vibration acceleration, vibration velocity and vibration displacement directly on the display.
Measuring ranges
- Acceleration: 0.0 ... 399.9 m/s²
- Velocity: 0.00 ... 399.9 mm/s
- Displacement: 0.000 ... 3.9 mm
- Automatic ISO 10816-3 evaluation
- Colored graphic display
- Incl. ISO calibration certificate
Measuring ranges
- Acceleration: 0.0 ... 399.9 m/s²
- Velocity: 0.00 ... 399.9 mm/s
- Displacement: 0.000 ... 3.9 mm
- Automatic ISO 10816-3 evaluation
- Colored graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Order no.: PCE-VT 3700
The HVAC meter is ideal for maintenance workers to quickly check vibrating parts, machines and systems. This HVAC meter shows the vibration acceleration, vibration velocity and vibration displacement directly on the display.
Measuring ranges
- Acceleration: 0.0 ... 399.9 m/s²
- Velocity: 0.00 ... 399.9 mm/s
- Displacement: 0.000 ... 3.9 mm
- Automatic ISO 10816-3 evaluation
- Colored graphic display
- Incl. ISO calibration certificate
Measuring ranges
- Acceleration: 0.0 ... 399.9 m/s²
- Velocity: 0.00 ... 399.9 mm/s
- Displacement: 0.000 ... 3.9 mm
- Automatic ISO 10816-3 evaluation
- Colored graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Order no.: FMC
The Moisture Analyzer FMC can accurately measure absolute humidity in diverse building materials. To detect moisture, the Moisture Analyzer has a connection for external sensors which can either be inserted into the building material or placed on it.
- Measuring range: 5-99% wood / 0-99% building materials
- Resolution: 0.1 %
- Accuracy: ±0.3 %
- Sensor not included
- External probe
- For wood, paper and building materials
Manufacturer: Brookhuis Applied Technologies B.V.
Order no.: FMC
The Moisture Meter FMC can accurately measure absolute humidity in diverse building materials. To detect humidity, the Moisture Meter has a connection for external sensors which can either be inserted into the building material or placed on it.
- Measuring range: 5-99% wood / 0-99% building materials
- Resolution: 0.1 %
- Accuracy: ±0.3 %
- Sensor not included
- External probe
- For wood, paper and building materials
Manufacturer: Brookhuis Applied Technologies B.V.
Order no.: PCE-PH 22-TUM 20-CM 41-KIT
The salt water swimming pool pH meter kit PCE-PH 22-TUM 20-CM 41-KIT is a very easy to use measuring device kit for determining the pH value, turbidity or salt content in various liquids. With the help of the BNC connection of the pH meter, various pH electrodes can also be connected to the pH meter. The turbidity meter is a handy meter with a large display that meets all the requirements for on-site turbidity measurement. With the salt content measuring device you have the possibility to measure the conductivity value, the sum of all dissolved solids or salts (TDS / Total Dissolved Solids) and the temperature.
- Measurement accuracy: ± 0.02 pH
- Resolution: 0.01 pH
- Device kit for outdoor swimming pools
- Including the PCE-TUM 20 turbidity meter
- PCE-TUM 20 measuring range: 0.00 to 50.0 NTU and 50 to 1000 NTU
- Resolution: 0.01 and 1 NTU
- Including conductivity meter
Manufacturer: PCE Instruments