Industrial Measurement Products and Solutions
Order no.: PCE-EV-KIT 3

This hygrometer kit includes gauges for demanding applications with advanced functionality. The hygrometer kit has been specially formulated to meet all requirements with regard to the assessment of the environment. With these devices, the recorded values are saved and can then be evaluated on a PC or laptop. The hygrometer kit consists of the following devices:


- P1 / PCE-322A
- P2 / PCE-890U
- P3 / PCE-174
- P4 / PCE-330

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-EV-KIT 3

This noise meter kit includes gauges for demanding applications with advanced functionality. The noise meter kit has been specially formulated to meet all requirements with regard to the assessment of the environment. With these devices, the recorded values are saved and can then be evaluated on a PC or laptop. The noise meter kit consists of the following devices:


- P1 / PCE-322A
- P2 / PCE-890U
- P3 / PCE-174
- P4 / PCE-330

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-EV-KIT 3

This sound level meter kit includes gauges for demanding applications with advanced functionality. The sound level meter kit has been specially formulated to meet all requirements with regard to the assessment of the environment. With these devices, the recorded values are saved and can then be evaluated on a PC or laptop. The sound level meter meter kit consists of the following devices:


- P1 / PCE-322A (Class 2)
- P2 / PCE-890U
- P3 / PCE-174
- P4 / PCE-330

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-895-ICA

The dual infrared thermometer is used for fast surface temperature measurement.The two laser points of the infrared thermometer PCE-895 mark the exact measuring point and thus offer excellent assistance with the temperature measurement.

- Temperature measurement up to 1600°C / 2912°F
- Cross laser thermometer
- K-Type or infrared measurement
- Optical resolution:60:1
- Adjustable emissivity
- Incl. ISO Calibration Certificate
- Suitable for long-term measurements

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MCWNT6

The PCE-MCWNT6 is a verifiable Force Gauge, available in three versions, weighing up to a maximum of 6000 kg. With compact dimensions, the Force Gauge is useful for many applications. The MCWNT6 is powered by 4 conventional AA batteries. The Force Gauge is delivered manufacturer calibrated, but can optionally be certified according to ISO standards.


- Maximum load: 6000 kg
- Resolution: 0.5 kg - 1500 kg / 1 kg - 3000 kg / 2 kg - 6000 kg
- Percentage weighing

Manufacturer: Dini Argeo GmbH
Test Instruments manufacturer
Order no.: PCE-VE 330N

PCE-VE 330N is an automotive tester, borescope, inspection camera or industrial endoscope for the non-destructive inspection (NDI) of engines, machines and more. This industrial borescope is an ideal tool for diagnosing issues in hard-to-reach places. The waterproof camera head features 4 LED lights with automatic illumination. In addition, digital image magnification or zoom of up to 2 times is available.


- Diameter camera head: Ø 5.5mm / 0.22"
- Interface: Mini-USB 1.1 and AV out
- Memory: 8 GB SD memory card (incl.)
- Cable length: 2 m / 6ft 6"

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 80
The paint layer automotive tester PCE-CT 80 is a measuring device for the nondestructive measurement of coatings (paints, lacquers, plastics ...) on steel / iron and non-ferrous metals.

- Measuring range: Fe: 0 ... 5000 μm (0 ... 196.9 mils) / NFe: 0 ... 3000 μm (0 ... 118.1 mils)
- For many materials such as:
- Iron
- Steel
- Aluminum
- Copper
- Brass
- Stainless steel
- Incl. ISO laboratory calibration with certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 80
The paint layer coating thickness gauge PCE-CT 80 is a measuring device for the nondestructive measurement of coatings (paints, lacquers, plastics ...) on steel / iron and non-ferrous metals.

- Measuring range: Fe: 0 ... 5000 μm (0 ... 196.9 mils) / NFe: 0 ... 3000 μm (0 ... 118.1 mils)
- For many materials such as:
- Iron
- Steel
- Aluminum
- Copper
- Brass
- Stainless steel
- Incl. ISO laboratory calibration with certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CIC 5
A color matching cabinet enables the user to make direct visual color comparisons on products that are to be produced or are already in production. Color comparisons in a color matching cabinet are important for a company that aims to offer high and consistent quality in its products.

Color assessment with 4 different types of light
- Daylight
- Standard light
- Retail store light
- House light
- Meets ASTM D1729 standards
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CIC 5
A color viewing box enables the user to make direct visual color comparisons on products that are to be produced or are already in production. Color comparisons in a color viewing box are important for a company that aims to offer high and consistent quality in its products.

Color assessment with 4 different types of light
- Daylight
- Standard light
- Retail store light
- House light
- Meets ASTM D1729 standards
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PDA 01L

The differential pressure meter PCE-PDA 01L is a reliable differential pressure gauge for pressure measurement of gases in the range of ± 200 Pa. The differential pressure meter PCE-PDA 01L has many different pressure measuring functions.


- Measuring range: ± 200 Pa / 0.029 psi / 0.002 bar
- Resolution: 0.1 Pa / 0.0000145 psi / 0.000001 bar
- Accuracy: ± 1% of final value
- Min and Max value memory
- Data logger and leak test
- Temperature measurement, flow measurement

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DDO 10

The PCE-DDO 10 shore durometer is an ergonomic device to check Shore hardness in gum. It has been designed with a high quality. The PCE-DDO 10 durometer is mainly used for soft gums. If the material thickness is not enough, it should be tightened on the back with the same material in order to increase its thickness.


- Handheld device
- For Shore O measurements
- Single and Serial-Measurements
- Data transfer to PC

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-GM 55
The Gloss Meter PCE-GM 55 is a 3-angle glossmeter. The measuring angles of the gloss meter are 20°, 45° and 75°. This allows the gloss meter to be used for gloss measurements in the high gloss and medium gloss ranges. The special measuring angle of 75° allows, among other things, measurements of the degree of gloss on paper and textiles.

- Range : 0 ... 200 gloss units / highlights
- Accuracy: ± 1 gloss units
- Repeatability: ± 0.5 gloss units
- Optical angle: 20°, 45°, 75°
- For medium and high gloss
- Measurements on textiles and paper possible
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DDO 10

The PCE-DDO 10 hardness tester is an ergonomic device to check Shore O hardness in gum. It has been designed with a high quality. The PCE-DDO 10 hardness tester is mainly used for soft gums. If the material thickness is not enough, it should be tightened on the back with the same material in order to increase its thickness.


- Handheld device
- For Shore O measurements
- Single and Serial-Measurements
- Data transfer to PC

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PDA 01L

The HVAC meter PCE-PDA 01L is a reliable differential pressure gauge for pressure measurement of gases in the range of ± 200 Pa. The HVAC meter PCE-PDA 01L has many different pressure measuring functions.


- Measuring range: ± 200 Pa  / 0.029 psi / 0.002 bar
- Resolution: 0.1 Pa / 0.0000145 psi / 0.000001 bar
- Accuracy: ± 1% of final value
- Min and Max value memory
- Data logger and leak test
- Temperature measurement, flow measurement

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 330N

The PCE-VE 330N is an industrial borescope, inspection camera or industrial endoscope for the non-destructive inspection (NDI) of engines, machines and more. This industrial borescope is an ideal tool for diagnosing issues in hard-to-reach places. The waterproof camera head features 4 LED lights with automatic illumination. In addition, digital image magnification or zoom of up to 2 times is available.

 

- Diameter camera head: Ø 5.5mm / 0.22"
- Interface: Mini-USB 1.1 and AV out
- Memory: 8 GB SD memory card (incl.)
- Cable length: 2 m / 6ft 6"

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 330N

PCE-VE 330N is an inspection camera, borescope or industrial endoscope for the non-destructive inspection (NDI) of engines, machines and more. This industrial borescope is an ideal tool for diagnosing issues in hard-to-reach places. The waterproof camera head features 4 LED lights with automatic illumination. In addition, digital image magnification or zoom of up to 2 times is available.


- Diameter camera head: Ø 5.5mm / 0.22"
- Interface: Mini-USB 1.1 and AV out
- Memory: 8 GB SD memory card (incl.)
- Cable length: 2 m / 6ft 6"

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PDA 01L

The manometer PCE-PDA 01L is a reliable differential pressure gauge for pressure measurement of gases in the range of ± 200 Pa. The manometer PCE-PDA 01L has many different pressure measuring functions.


- Measuring range: ± 200 Pa  / 0.029 psi / 0.002 bar
- Resolution: 0.1 Pa / 0.0000145 psi / 0.000001 bar
- Accuracy: ± 1% of final value
- Min and Max value memory
- Data logger and leak test
- Temperature measurement, flow measurement

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 80
The paint layer material tester PCE-CT 80 is a measuring device for the nondestructive measurement of coatings (paints, lacquers, plastics ...) on steel / iron and non-ferrous metals.

- Measuring range: Fe: 0 ... 5000 μm (0 ... 196.9 mils) / NFe: 0 ... 3000 μm (0 ... 118.1 mils)
- For many materials such as:
- Iron
- Steel
- Aluminum
- Copper
- Brass
- Stainless steel
- Incl. ISO laboratory calibration with certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-GM 55
The NDT tester PCE-GM 55 is a 3-angle gloss meter. The measuring angles of the gloss meter are 20°, 45° and 75°. This allows the NDT tester to be used for gloss measurements in the high gloss and medium gloss ranges. The special measuring angle of 75° allows, among other things, measurements of the degree of gloss on paper and textiles.

- Range : 0 ... 200 gloss units / highlights
- Accuracy: ± 1 gloss units
- Repeatability: ± 0.5 gloss units
- Optical angle: 20°, 45°, 75°
- For medium and high gloss
- Measurements on textiles and paper possible
Manufacturer: PCE Instruments
Test Instruments manufacturer