Industrial Measurement Products and Solutions
Order no.: PCE-N50F
The force indicator PCE-N50F is suitable for panel mounting. This force indicator PCE-N50F can be used to indicate the weight, force or torque. The decisive factor here is the type of sensor that is connected to the force indicator PCE-N50F.

- Signal input range: 0 ... 20 mV
- Units: g, mN, mlb, Pa, kg, N, Ib, kPa, t, kN, klb, MPa
- For load cells, force sensors, etc.
- Up to 1600 Hz sampling rate
- LCD display
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-N50F
The indicator PCE-N50F is suitable for panel mounting. This indicator PCE-N50F can be used to indicate the weight, force or torque. The decisive factor here is the type of sensor that is connected to the indicator PCE-N50F.

- Signal input range: 0 ... 20 mV
- Units: g, mN, mlb, Pa, kg, N, Ib, kPa, t, kN, klb, MPa
- For load cells, force sensors, etc.
- Up to 1600 Hz sampling rate
- LCD display
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: LTS-20

LTS-20 Force Gauge Test Stand is designed to be used in combination with either the PCE-FM series, PCE-DFG series, or PCE-PTR. The Test Stand offers the ideal solution for measuring traction and compression, and guarantees precise correspondence between the test matrix and the test position.


- Maximum usable length: 345 mm
- Total length: 530 mm (without hand wheel)
- Hand wheel diameter: 120 mm
- Maximum range of force: 1000 N / 100 kg / 220 lbs
- the mounting plate ADP-UNI must be ordered at the same time!

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-N50F
The weight indicator PCE-N50F is suitable for panel mounting. This weight indicator PCE-N50F can be used to indicate the weight, force or torque. The decisive factor here is the type of sensor that is connected to the weight indicator PCE-N50F.

- Signal input range: 0 ... 20 mV
- Units: g, mN, mlb, Pa, kg, N, Ib, kPa, t, kN, klb, MPa
- For load cells, force sensors, etc.
- Up to 1600 Hz sampling rate
- LCD display
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CS 3000N-ICA

PCE-CS 3000N-ICA is a digital, rechargeable battery-powered, heavy-duty crane scale that displays measurement values in kilograms (kg) or pounds (lbs). The crane scale includes a hook, shackle, remote control and ISO calibration certificate.


- Maximum weighing capacity: 3000 kg / 6613 lbs ≈ 3 Tons
- Resolution: 0.5 kg
- Tare range: 100 % full scale
- Includes hook, shackle, and remote control
- Includes ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CS 3000N-ICA

PCE-CS 3000N-ICA is a digital, rechargeable battery-powered, heavy-duty dynamometer that displays measurement values in kilograms (kg) or pounds (lbs). The dynamometer includes a hook, shackle, remote control and ISO calibration certificate.


- Maximum weighing capacity: 3000 kg / 6613 lbs ≈ 3 Tons
- Resolution: 0.5 kg
- Tare range: 100 % full scale
- Includes hook, shackle, and remote control
- Includes ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CS 3000N-ICA

PCE-CS 3000N-ICA is a digital, rechargeable battery-powered, heavy-duty force gauge that displays measurement values in kilograms (kg) or pounds (lbs). The force gauge includes a hook, shackle, remote control and ISO calibration certificate.


- Maximum weighing capacity: 3000 kg / 6613 lbs ≈ 3 Tons
- Resolution: 0.5 kg
- Tare range: 100 % full scale
- Includes hook, shackle, and remote control
- Includes ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CS 3000N-ICA

PCE-CS 3000N-ICA is a digital, rechargeable battery-powered, heavy-duty hanging scale that displays measurement values in kilograms (kg) or pounds (lbs). The industrial hanging scale includes a hook, shackle, remote control and ISO calibration certificate.


- Maximum weighing capacity: 3000 kg / 6613 lbs ≈ 3 Tons
- Resolution: 0.5 kg
- Tare range: 100 % full scale
- Includes hook, shackle, and remote control
- Includes ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CS 3000N-ICA

PCE-CS 3000N-ICA is a digital, rechargeable battery-powered, heavy-duty scale that displays measurement values in kilograms (kg) or pounds (lbs). The heavy duty scale includes a hook, shackle, remote control and ISO calibration certificate.


- Maximum weighing capacity: 3000 kg / 6613 lbs ≈ 3 Tons
- Resolution: 0.5 kg
- Tare range: 100 % full scale
- Includes hook, shackle, and remote control
- Includes ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CS 3000N-ICA

PCE-CS 3000N-ICA is a digital, rechargeable battery-powered, heavy-duty weighing hook or crane scale that displays measurement values in kilograms (kg) or pounds (lbs). The crane scale includes a hook, shackle, remote control and ISO calibration certificate.


- Maximum weighing capacity: 3000 kg / 6613 lbs ≈ 3 Tons
- Resolution: 0.5 kg
- Tare range: 100 % full scale
- Includes hook, shackle, and remote control
- Includes ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 50-ICA

PCE-CT 50 is a Automotive Tester Coating Thickness Gauge that takes non-destructive measurements of nonmagnetic coating, insulating layer and dry film thickness (DFT) on only non-ferrous metal substrates such as aluminum, brass, stainless steel and anodized aluminum. Ideal for surface testing, automotive paint inspection, material testing and manufacturing quality control applications.


- Measuring range of 5000 microns (µm) / 200 mil
- Accuracy of ±(1 µm / 0.04 mils +2 %) of 0 µm ... 999 µm / 40 mils ±3.5 % of
  1001 µm ... 5000 µm / 40 mils ... 200 mils
- Resolution of 0.1 µm / 0.01 mil / 0.01 mm
- incl. ISO Calibration Certificate 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 50-ICA

PCE-CT 50 is a Coating Thickness Gauge that takes non-destructive measurements of nonmagnetic coating, insulating layer and dry film thickness (DFT) on only non-ferrous metal substrates such as aluminum, brass, stainless steel and anodized aluminum. Ideal for surface testing, automotive paint inspection, material testing and manufacturing quality control applications.


- Measuring range of 5000 microns (µm) / 200 mil
- Accuracy of ±(1 µm / 0.04 mils +2 %) of 0 µm ... 999 µm / 40 mils ±3.5 % of
  1001 µm ... 5000 µm / 40 mils ... 200 mils
- Resolution of 0.1 µm / 0.01 mil / 0.01 mm
- incl. ISO Calibration Certificate 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 50-ICA

PCE-CT 50 is a Material Thickness Meter that takes non-destructive measurements of nonmagnetic coating, insulating layer and dry film thickness (DFT) on only non-ferrous metal substrates such as aluminum, brass, stainless steel and anodized aluminum. Ideal for surface testing, automotive paint inspection, material testing and manufacturing quality control applications.


- Measuring range of 5000 microns (µm) / 200 mil
- Accuracy of ±(1 µm / 0.04 mils +2 %) of 0 µm ... 999 µm / 40 mils ±3.5 % of
  1001 µm ... 5000 µm / 40 mils ... 200 mils
- Resolution of 0.1 µm / 0.01 mil / 0.01 mm
- incl. ISO Calibration Certificate 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 50-ICA

PCE-CT 50 is a Paint Tester that takes non-destructive measurements of nonmagnetic coating, insulating layer and dry film thickness (DFT) on only non-ferrous metal substrates such as aluminum, brass, stainless steel and anodized aluminum. Ideal for surface testing, automotive paint inspection, material testing and manufacturing quality control applications.


- Measuring range of 5000 microns (µm) / 200 mil
- Accuracy of ±(1 µm / 0.04 mils +2 %) of 0 µm ... 999 µm / 40 mils ±3.5 % of
  1001 µm ... 5000 µm / 40 mils ... 200 mils
- Resolution of 0.1 µm / 0.01 mil / 0.01 mm
- incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 50-ICA

PCE-CT 50 is a Surface Testing - Coating Thickness Gauge that takes non-destructive measurements of nonmagnetic coating, insulating layer and dry film thickness (DFT) on only non-ferrous metal substrates such as aluminum, brass, stainless steel and anodized aluminum. Ideal for surface testing, automotive paint inspection, material testing and manufacturing quality control applications.


- Measuring range of 5000 microns (µm) / 200 mil
- Accuracy of ±(1 µm / 0.04 mils +2 %) of 0 µm ... 999 µm / 40 mils ±3.5 % of
  1001 µm ... 5000 µm / 40 mils ... 200 mils
- Resolution of 0.1 µm / 0.01 mil / 0.01 mm
- incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 50-ICA

PCE-CT 50 is a Thickness Gauge that takes non-destructive measurements of nonmagnetic coating, insulating layer and dry film thickness (DFT) on only non-ferrous metal substrates such as aluminum, brass, stainless steel and anodized aluminum. Ideal for surface testing, automotive paint inspection, material testing and manufacturing quality control applications.


- Measuring range of 5000 microns (µm) / 200 mil
- Accuracy of ±(1 µm / 0.04 mils +2 %) of 0 µm ... 999 µm / 40 mils ±3.5 % of
  1001 µm ... 5000 µm / 40 mils ... 200 mils
- Resolution of 0.1 µm / 0.01 mil / 0.01 mm
- incl. ISO Calibration Certificate 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 50-ICA

PCE-CT 50 is a Thickness Meter that takes non-destructive measurements of nonmagnetic coating, insulating layer and dry film thickness (DFT) on only non-ferrous metal substrates such as aluminum, brass, stainless steel and anodized aluminum. Ideal for surface testing, automotive paint inspection, material testing and manufacturing quality control applications.


- Measuring range of 5000 microns (µm) / 200 mil
- Accuracy of ±(1 µm / 0.04 mils +2 %) of 0 µm ... 999 µm / 40 mils ±3.5 % of
  1001 µm ... 5000 µm / 40 mils ... 200 mils
- Resolution of 0.1 µm / 0.01 mil / 0.01 mm
- incl. ISO Calibration Certificate 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: FMC

The Absolute Moisture Meter FMC can accurately measure absolute moisture in diverse building materials. To detect moisture, the test instrument has a connection for external sensors which can either be inserted into the building material or placed on it.


- Measuring range: 5-99% wood / 0-99% building materials
- Resolution: 0.1 % / Accuracy: ±0.3 %
- Sensor not included
- External probe
- For wood, paper and building materials

Manufacturer: Brookhuis Applied Technologies B.V.
Test Instruments manufacturer
Order no.: FMC

The Concrete Moisture Meter FMC can accurately measure absolute humidity in diverse building materials. To detect humidity, the Concrete Moisture Meter has a connection for external sensors which can either be inserted into the building material or placed on it.


- Measuring range: 5-99% wood / 0-99% building materials
- Resolution: 0.1 %
- Accuracy: ±0.3 %
- Sensor not included
- External probe
- For wood, paper and building materials

Manufacturer: Brookhuis Applied Technologies B.V.
Test Instruments manufacturer
Order no.: PCE-PDA 01L

The differential pressure meter PCE-PDA 01L is a reliable differential pressure gauge for pressure measurement of gases in the range of ± 200 kPa. The differential pressure meter PCE-PDA 01L has many different pressure measuring functions.


- Measuring range pressure: ± 200 Pa  / 1.50 mmHg / 0.029 PSI
- Resolution: 0.01 / 0.1 Pa
- Accuracy: ± 1% of final value
- Min and Max value memory
- Datalogger and leak test
- Temperature measurement, flow measurement

Manufacturer: PCE Instruments
Test Instruments manufacturer