Industrial Measurement Products and Solutions
Order no.: Xgard-5-CH

The Xgard-5-CH is a single-gas Gas Leak Detector used to warn for gases (Inflammable gases, CH, 0... 100 % UEG), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Inflammable gases, CH, 0... 100 % UEG)
- Additional display and alarm station
- ATEX or UL approval

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: Benchtop Scale PKP 12K0.05

Benchtop Scale
Robust laboratory and industrial scales with graphics display.


- Capacity [Max]: 12100 g
- Readability [d]: 0.05 g
- Dimensions of weighing plate [Ø/BxT]: 160x200 mm
- Calibratable


Manufacturer: Kern & Sohn GmbH
Test Instruments manufacturer
Order no.: Check Weighing Scale PKP 12K0.05

Check Weighing Scale
Robust laboratory and industrial scales with graphics display.


- Capacity [Max]: 12100 g
- Readability [d]: 0.05 g
- Dimensions of weighing plate [Ø/BxT]: 160x200 mm
- Calibratable

 

Manufacturer: Kern & Sohn GmbH
Test Instruments manufacturer
Order no.: LAB Scale PKP 12K0.05

LAB Scale
Robust laboratory and industrial scales with graphics display.


- Capacity [Max]: 12100 g
- Readability [d]: 0.05 g
- Dimensions of weighing plate [Ø/BxT]: 160x200 mm
- Calibratable


Manufacturer: Kern & Sohn GmbH
Test Instruments manufacturer
Order no.: Laboratory Balance PKP 12K0.05

Laboratory Balance
Robust laboratory and industrial scales with graphics display


- Capacity [Max]: 12100 g
- Readability [d]: 0.05 g
- Dimensions of weighing plate [Ø/BxT]: 160x200 mm
- Calibratable


Manufacturer: Kern & Sohn GmbH
Test Instruments manufacturer
Order no.: Part Counting Scale PKP 12K0.05

Part Counting Scale
Robust laboratory and industrial scales with graphics display.


- Capacity [Max]: 12100 g
- Readability [d]: 0.05 g
- Dimensions of weighing plate [Ø/BxT]: 160x200 mm
- Calibratable 

 

Manufacturer: Kern & Sohn GmbH
Test Instruments manufacturer
Order no.: Precision Balance PKP 12K0.05

Precision Balance
Robust laboratory and industrial scales with graphics display.


- Capacity [Max]: 12100 g
- Readability [d]: 0.05 g
- Dimensions of weighing plate [Ø/BxT]: 160x200 mm
- Calibratable 

 

Manufacturer: Kern & Sohn GmbH
Test Instruments manufacturer
Order no.: Tabletop Scale PKP 12K0.05

Tabletop Scale
Robust laboratory and industrial scales with graphics display.


- Capacity [Max]: 12100 g
- Readability [d]: 0.05 g
- Dimensions of weighing plate [Ø/BxT]: 160x200 mm
- Calibratable 

 

Manufacturer: Kern & Sohn GmbH
Test Instruments manufacturer
Order no.: Xgard-5-CH

The Xgard-5-CH is a single-gas Gas Detector used to warn for gases (Inflammable gases, CH, 0 ... 100 % UEG), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Inflammable gases, CH, 0 ... 100 % UEG)
- Additional display and alarm station
- ATEX or UL approval

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: PCE-PGM 60-ICA

PCE-PGM 60 is a portable handheld gloss meter or gloss tester used to evaluate the shine on different material surfaces. The gloss tester includes a 3.5" TFT touchscreen display, internal memory and PC-compatible software for detailed analysis.


- Measuring geometry: 60° degree angle
- Measuring range: 0 ... 300 GU
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Light source: D65
- Wave length: 400-700 nm
- Incl. ISO calibration certificate
- Includes PC-compatible software for detailed analysis

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PGM 60-ICA

The PCE-PGM 60 Surface Testing has a measuring geometry of 60°. The Surface Testing is used to analyze surfaces of different materials. Gloss measurements are particularly carried out in the production industry where products must have exactly the same characteristics.


- Measurement geometry: 60° degree angle
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Measuring range: 0 ... 300 GU
- Light source: D65
- Wave length: 400-700 nm
- Incl. ISO calibration certificate
- Includes PC-compatible software for detailed analysis

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: CA-D35N

The CA-D35N D Series Clamp on Tester for oscilloscopes has a high-quality iron core with evenly distributed windings. This allows accurate AC current measurement, even at currents up to 3000 A. Due to the rectangular shape, the Clamp on Tester is particularly suitable for busbars and cables with a large cross section. The Clamp on Tester adapter comes manufacturer calibrated with ISO calibration as an option.
- Measuring range: 1 A to 1000 A, 1 A to 2000 A, 1 A to 3000 A
- Transformer Ratio: 1 A / 1 mA, 2 A / 1 mA, 3 A / 1 mA
- Connection: 4 mm / 0.2 in socket

Manufacturer: Chauvin Arnoux GmbH
Test Instruments manufacturer
Order no.: CA-D35N

The CA-D35N D Series Current Clamp for oscilloscopes has a high-quality iron core with evenly distributed windings. This allows accurate AC current measurement, even at currents up to 3000 A. Due to the rectangular shape, the Current Clamp is particularly suitable for busbars and cables with a large cross section. The Current Clamp adapter comes manufacturer calibrated with ISO calibration as an option.
- Measuring range: 1 A to 1000 A, 1 A to 2000 A, 1 A to 3000 A
- Transformer Ratio: 1 A / 1 mA, 2 A / 1 mA, 3 A / 1 mA
- Connection: 4 mm / 0.2 in socket

Manufacturer: Chauvin Arnoux GmbH
Test Instruments manufacturer
Order no.: 830

A Series 830 Force Gauge provides a cost effective and easy way to measure pressure forces. Our hydraulic force gauge is based on the principle that a hydraulically transmitted force acts on the load cell, which then transmits the measured value directly to the dial gauge.


- Nominal load: up to 100 kN (depending on the model)
- Measurement uncertainty: ≤ ± 2 %
- Temperature range: 0 ... 50 °C / 32 ... 122 °F


Please make your selection in the technical data or in the shopping cart.

Manufacturer: Erichsen GmbH & Co. KG
Test Instruments manufacturer
Order no.: PCE-VE 330N

PCE-VE 330N is an automotive tester, borescope, inspection camera or industrial endoscope for the non-destructive inspection (NDI) of engines, machines and more. This industrial borescope is an ideal tool for diagnosing issues in hard-to-reach places. The waterproof camera head features 4 LED lights with automatic illumination. In addition, digital image magnification or zoom of up to 2 times is available.


- Diameter camera head: Ø 5.5mm / 0.22"
- Interface: Mini-USB 1.1 and AV out
- Memory: 8 GB SD memory card (incl.)
- Cable length: 2 m / 6ft 6"

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RM 100
The gloss or opacity meter PCE-RM 100 is used to measure the reflection properties of surfaces related to opacity. The gloss meter PCE-RM 100 is used in tinting glass, film quality, opacity of paper, light shading and the hiding power of various paints, inks, and coatings. 

- Measuring range: 0 ... 100 (0 is transparent and 100 is fully opaque)
- Optical measurement angle: 45º degree angle
- Measuring accuracy: ± 1
- Resolution: 0.1
- Battery operation
- Interface and software
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 330N

The PCE-VE 330N is an industrial borescope, inspection camera or industrial endoscope for the non-destructive inspection (NDI) of engines, machines and more. This industrial borescope is an ideal tool for diagnosing issues in hard-to-reach places. The waterproof camera head features 4 LED lights with automatic illumination. In addition, digital image magnification or zoom of up to 2 times is available.

 

- Diameter camera head: Ø 5.5mm / 0.22"
- Interface: Mini-USB 1.1 and AV out
- Memory: 8 GB SD memory card (incl.)
- Cable length: 2 m / 6ft 6"

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 330N

PCE-VE 330N is an inspection camera, borescope or industrial endoscope for the non-destructive inspection (NDI) of engines, machines and more. This industrial borescope is an ideal tool for diagnosing issues in hard-to-reach places. The waterproof camera head features 4 LED lights with automatic illumination. In addition, digital image magnification or zoom of up to 2 times is available.


- Diameter camera head: Ø 5.5mm / 0.22"
- Interface: Mini-USB 1.1 and AV out
- Memory: 8 GB SD memory card (incl.)
- Cable length: 2 m / 6ft 6"

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RM 100
The NDT tester - opacity meter PCE-RM 100 is used to measure the reflection properties of surfaces. The NDT tester - opacity meter PCE-RM 100 is used in tinting glass, film quality, opacity of paper, light shading and the hiding power of various paints, inks, and coatings. 

- Measuring range: 0 ... 100 (0 is transparent and 100 is fully opaque)
- Optical measurement angle: 45º degree angle
- Measuring accuracy: ± 1
- Resolution: 0.1
- Battery operation
- Interface and software
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 330N

PCE-VE 330N is a snake camera, inspection camera or industrial endoscope for the non-destructive inspection (NDI) of engines, machines and more. This industrial snake camera is an ideal tool for diagnosing issues in hard-to-reach places.


- Diameter camera head: Ø 5.5mm / 0.22"
- Interface: Mini-USB 1.1 and AV out
- Memory: 8 GB SD memory card (incl.)
- Cable length: 2 m / 6ft 6"

Manufacturer: PCE Instruments
Test Instruments manufacturer