Industrial Measurement Products and Solutions
Order no.: PCE-170 CB
The cable detector is a universal measuring device. With this cable detector for example, RJ11 ISDN telephone lines can be checked for their function. For this purpose it is sufficient to connect the RJ 11 plug of the cable detector with the telephone socket.

Test functions
- Network cable testing
- Coaxial cable test
- Network cable finder
- Continuity test
- Telephone line test
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-170 CB
The cable fault meter is a universal measuring device. With this cable fault meter, for example, RJ11 ISDN telephone lines can be checked for their function. For this purpose it is sufficient to connect the RJ 11 plug of the cable fault meter with the telephone socket.

Test functions
- Network cable testing
- Coaxial cable test
- Network cable finder
- Continuity test
- Telephone line test
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-170 CB
The cable locator is a universal measuring device. With this cable locator, for example, RJ11 ISDN telephone lines can be checked for their function. For this purpose it is sufficient to connect the RJ 11 plug of the cable locator with the telephone socket.

Test functions
- Network cable testing
- Coaxial cable test
- Network cable finder
- Continuity test
- Telephone line test
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-LCTB 86/40 (45)
The current transformers of the PCE-LCTB 86/40 (45) series are used when alternating currents in circuits are too high to be detected directly by measuring devices. The current transformer converts the primary current into a proportionally reduced secondary current, which can be processed by a measuring device. In addition, the current transformer protects connected measuring devices from excessive voltages.

- Primary winding (input): 50 A ... 1000 A
- secondary (output): 1 A / 5 A
- System voltage: max. 720 V
- Accuracy grades: 0.2s / 0.2 / 0.5 / 1
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-N24S

The PCE-N24S universal indicator is used for the signal processing of 4 .. 20 mA. The PCE-N24S universal indicator has a 5-digit LED display to allow the user to read the directly measured current values.


- IP 65 in the front
- For 4-20 mA signals
- Connection by means of a screw terminal

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: 20010 Micro-Linie

The 10 g Dynamometer is a vertical hanging suspension hook for traction force measurement. Ideal for use in colleges, this corrosion-resistant anodized aluminum analog scale features a fatigue-resistant internal spring and requires no batteries.


- Measurement range: 10 g
- Resolution: 0.001 N
- Accuracy: ± 0.3 % of load
- Tare and zero adjustment 

 

Manufacturer: Pesola
Test Instruments manufacturer
Order no.: 20001 Micro-Linie

The 1N Dynamometer is a vertical hanging suspension hook for traction force measurement. Ideal for use in colleges, this corrosion-resistant anodized aluminum analog scale features a fatigue-resistant internal spring and requires no batteries.


- Measurement range: 1 Newton (N)
- Resolution: 0.01 N
- Accuracy: ± 0.3 % of load
- Tare and zero adjustment 

 

Manufacturer: Pesola
Test Instruments manufacturer
Order no.: PCE-N24S

The PCE-N24S frequency indicator is used for the signal processing of 4 .. 20 mA. The PCE-N24S frequency indicator has a 5-digit LED display to allow the user to read the directly measured current values.


- IP 65 in the front
- For 4-20 mA signals
- Connection by means of a screw terminal

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: 20010 Micro-Linie

The 10 g Hanging Scale / Force Gauge is a vertical hanging suspension hook for traction force measurement. Ideal for use in classroom demonstrations, this corrosion-resistant anodized aluminum analog scale features a fatigue-resistant internal spring and requires no batteries.


- Measurement range: 10 g
- Resolution: 0.001 N
- Accuracy: ± 0.3 % of load
- Tare and zero adjustment 

 

Manufacturer: Pesola
Test Instruments manufacturer
Order no.: 20001 Micro-Linie

The 1N Hanging Scale / Force Gauge is a vertical hanging suspension hook for traction force measurement. Ideal for use in classroom demonstrations, this corrosion-resistant anodized aluminum analog scale features a fatigue-resistant internal spring and requires no batteries.


- Measurement range: 1 Newton (N)
- Resolution: 0.01 N
- Accuracy: ± 0.3 % of load
- Tare and zero adjustment 

 

Manufacturer: Pesola
Test Instruments manufacturer
Order no.: 20010 Micro-Linie

The 10 g Hanging Scales are a vertical hanging suspension hook for traction force measurement. Ideal for use in colleges, these corrosion-resistant anodized aluminum analog scales feature a fatigue-resistant internal spring and require no batteries.


- Measurement range: 10 g
- Resolution: 0.001 N
- Accuracy: ± 0.3 % of load
- Tare and zero adjustment

Manufacturer: Pesola
Test Instruments manufacturer
Order no.: 20001 Micro-Linie

The 1N Hanging Scales are a vertical hanging suspension hook for traction force measurement. Ideal for use in colleges, these corrosion-resistant anodized aluminum analog scales feature a fatigue-resistant internal spring and require no batteries.


- Measurement range: 1 Newton (N)
- Resolution: 0.01 N
- Accuracy: ± 0.3 % of load
- Tare and zero adjustment

Manufacturer: Pesola
Test Instruments manufacturer
Order no.: 20010 Micro-Linie

The 10 g Laboratory Balance is a vertical hanging suspension hook for traction force measurement. Ideal for use in colleges, this corrosion-resistant anodized aluminum analog scale features a fatigue-resistant internal spring and requires no batteries.


- Measurement range: 10 g
- Resolution: 0.001 N
- Accuracy: ± 0.3 % of load
- Tare and zero adjustment 

 

Manufacturer: Pesola
Test Instruments manufacturer
Order no.: 20001 Micro-Linie

The 1N Laboratory Balance is a vertical hanging suspension hook for traction force measurement. Ideal for use in colleges, this corrosion-resistant anodized aluminum analog scale features a fatigue-resistant internal spring and requires no batteries.


- Measurement range: 1 Newton (N)
- Resolution: 0.01 N
- Accuracy: ± 0.3 % of load
- Tare and zero adjustment 

 

Manufacturer: Pesola
Test Instruments manufacturer
Order no.: PCE-N24S

The PCE-N24S panel indicator is used for the signal processing of 4 .. 20 mA. The PCE-N24S panel indicator has a 5-digit LED display to allow the user to read the directly measured current values.


- IP 65 in the front
- For 4-20 mA signals
- Connection by means of a screw terminal

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-170 CB
The pipe locator is a universal measuring device. With this pipe locator, for example, RJ11 ISDN telephone lines can be checked for their function. For this purpose it is sufficient to connect the RJ 11 plug of the pipe locator with the telephone socket.

Test functions
- Network cable testing
- Coaxial cable test
- Network cable finder
- Continuity test
- Telephone line test
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-N24Z

The digital indicator panel display PCE N24Z is used to represent AC parameters. The panel display can measure and display alternating current, AC voltage or frequency. The ability to scale the input signal is free, allowing a very wide range of applications.


- IP 65 in the front
- Measuring speed: > 0.5 sec.
- 4-digit LED screen (20 mm height)

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-N25H

The digital indicator PCE-N25H is used for measuring and displaying direct current and direct voltage. Depending on your specific needs, the digital indicator can be ordered with different inputs, such as ±100 V DC, ±250 V DC, ±400 V DC, ±1 A, ±5 A, 0...100 V DC or 0...250 V DC. The input signal of the digital indicator is freely scalable, which increases its application possibilities.


- 7 different input options
- Accuracy: ± (0.2 % FS + 1 digit)
- Configuration via software
- 5-digit LED display

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-N25Z

The digital indicator PCE-N25Z can be used for processing different AC input signals. Depending on your specific needs, the digital indicator can be ordered with different inputs, like 100 V AC, 250 V AC, 400 V AC, 1 A AC, 5 A AC and 20...50 Hz. The input signal of the digital indicator is freely scalable, which increases its application possibilities.


- IP65 protected on the front
- 6 different inputs available
- Configuration via software
- 5-digit LED display

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-N24S

The PCE-N24S power indicator is used for the signal processing of 4 .. 20 mA. The PCE-N24S power indicator has a 5-digit LED display to allow the user to read the directly measured current values.


- IP 65 in the front
- For 4-20 mA signals
- Connection by means of a screw terminal

Manufacturer: PCE Instruments
Test Instruments manufacturer