Order no.: PCE-ABT 220L
With a resolution of 0.1 mg, these counting scales are ideally suited for checking small samples for their weight. For example, powder can be weighed with the counting scales. Typical areas of application for the counting scales are therefore in laboratories or in research facilities.

- Measuring range: 0 ... 220 g
- Resolution: 0.1 mg
- Measurement accuracy: ±0.5 mg
- Windbreak
- RS232 data interface
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DDA 10

The PCE-DDA 10 Shore A durometer is a portable handheld device used to check Shore A hardness in soft gums, elastomers, natural rubber, neoprenes, casting resin, white PVC, leather, etc. This digital durometer has a reading accuracy of 0.1 hardness units. The durometer comes manufacturer calibrated and can be optionally certified to ISO standards for an additional fee (see accessories for details).


- Portable handheld digital device
- For Shore A hardness testing
- Single and serial measurements
- Data transfer to PC

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DDA 10

The PCE-DDA 10 shore hardness tester is an ergonomic device to check Shore hardness in gum, plastic and other non-metallic materials. It has been designed with a very high quality. The PCE-DDA 10 durometer is mainly used for soft gums, elastomers, natural rubber, neoprenes, casting resin, white PVC, leather, etc. It has a reading accuracy of 0.1 hardness units. The durometer (as all test instruments) comes manufacturer calibrated and can additionally be lab certified to ISO standards.


- Handheld device
- For Shore A measurements
- Single and Serial Measurements
- Data transfer to PC

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-ABT 220L
With a resolution of 0.1 mg, this laboratory scale is ideally suited for checking small samples for their weight. For example, powder can be weighed with the laboratory scale. Typical areas of application for the laboratory scale are therefore in laboratories or in research facilities.

- Measuring range: 0 ... 220 g
- Resolution: 0.1 mg
- Measurement accuracy: ±0.5 mg
- Windbreak
- RS232 data interface
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-ISFET-LanceFET + H
- Measuring range: 0.00 ... 14.00 pH
- normal to medium force
- high force
- Normal beakers and containers
- Liquids (low viscosity)
- viscous media (low to medium viscosity)
- Pasty media (medium to high viscosity)
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 200-S3

PCE-VE 200-S3 is an industrial inspection camera, endoscope or borescope for the non-destructive evaluation (NDE) of engines, machines and more. This industrial borescope provides excellent image quality at an affordable price. An ideal tool for diagnosing issues in hard-to-reach places, the waterproof camera head features 6 LED lights with adjustable intensity for optimal illumination. In addition, digital image magnification or zoom of up to 4 times is available.


- 3.7 mm / 0.14 in diameter
- 3 m / 9.8 ft cable length
- 1600 x 1200 pixels JPEG image / 640 x 480 pixels AVI video

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-895

The dual infrared digital thermometer is used for fast surface temperature measurement. The two laser points of the infrared digital thermometer PCE-895 mark the exact measuring point and thus offer excellent assistance with the temperature measurement. 

 

- Temperature measurement up to 1600°C / 2912°F
Cross laser thermometer
K-Type or infrared measurement
- Optical resolution: 60:1
- Adjustable emissivity
- Can be calibrated
- Suitable for long-term measurements

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 200-S3

The PCE-VE 200-S3 is an industrial inspection device, a borescope camera or engine borescope for the non-destructive evaluation (NDE) of engines, machines and more. This industrial borescope provides excellent image quality at an affordable price. An ideal tool for diagnosing issues in hard-to-reach places, the waterproof camera head of this kind of borescope features 6 LED lights with adjustable intensity for optimal illumination. In addition, digital image magnification or zoom of up to 4 times is available.


- 3.7 mm / 0.14 in diameter
- 3 m / 9.8 ft cable length
- 1600 x 1200 pixels JPEG image / 640 x 480 pixels AVI video

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-895

The dual infrared thermometer is used for fast surface temperature measurement.The two laser points of the infrared thermometer PCE-895 mark the exact measuring point and thus offer excellent assistance with the temperature measurement.

- Temperature measurement up to 1600 °C / 2912 °F
- Cross laser thermometer
- K-Type or infrared measurement
- Optical resolution 60:1
- Adjustable emissivity
- Can be calibrated
- Suitable for long-term measurements

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 200-S3

PCE-VE 200-S3 is an industrial inspection camera, endoscope or borescope for the non-destructive evaluation (NDE) of engines, machines and more. This industrial borescope provides excellent image quality at an affordable price. An ideal tool for diagnosing issues in hard-to-reach places, the waterproof camera head features 6 LED lights with adjustable intensity for optimal illumination. In addition, digital image magnification or zoom of up to 4 times is available.


- 3.7 mm / 0.14 in diameter
- 3 m / 9.8 ft cable length
- 1600 x 1200 pixels JPEG image / 640 x 480 pixels AVI video

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PA6000

The 1-Phase Power Meter PCE-PA6000 power analyzer can be used as a desktop or portable instrument for measuring active power, apparent power, power factor, energy consumption, AC voltage, AC current, DC voltage, DC current, resistance and frequency. The power / performance measurement can be performed with this ammeter either directly with the supplied test leads, or indirectly by current clamps.


- Performance
- Power factor
- AC voltage and current
- DC voltage and current, resistance and frequency
- Incl. Data Cable and Test Leads
- Software available in the accessories tab

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PA6000

The power meter PCE-PA6000 power analyzer can be used as a desktop or portable instrument for measuring active power, apparent power, power factor, energy consumption, AC voltage, AC current, DC voltage, DC current, resistance and frequency. The power / performance measurement can be performed with this power analyzer either directly with the supplied test leads, or indirectly by current clamps.


- Performance
- Power factor
- AC voltage and current
- DC voltage and current, resistance and frequency

- Incl. Data Cable and Test Leads
- Software available in the accessories tab

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PA6000

The power analyzer PCE-PA6000 power analyzer can be used as a desktop or portable instrument for measuring active power, apparent power, power factor, energy consumption, AC voltage, AC current, DC voltage, DC current, resistance and frequency. The power / performance measurement can be performed with this power analyzer either directly with the supplied test leads, or indirectly by current clamps.


- Performance
- Power factor
- AC voltage and current
- DC voltage and current, resistance and frequency

- Incl. Data Cable and Test Leads
- Software available in the accessories tab

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-895

The dual infrared pyrometer is used for fast surface temperature measurement. The two laser points of the pyrometer PCE-895 mark the exact measuring point and thus offer excellent assistance with the temperature measurement. 

 

- Temperature measurement up to 1600°C / 2912°F
Cross laser thermometer
K-Type or infrared measurement
- Optical resolution: 60:1
- Adjustable emissivity
- Can be calibrated
- Suitable for long-term measurements

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 200-S3

PCE-VE 200-S3 is an industrial snake camera, endoscope or borescope for the non-destructive evaluation (NDE) of engines, machines and more. This industrial snake camera provides excellent image quality at an affordable price. The snake camera PCE-VE 200-S3 you can buy here in our shop.


- 3.7 mm / 0.14 in diameter
- 3 m / 9.8 ft cable length
- 1600 x 1200 pixels JPEG image / 640 x 480 pixels AVI video

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 200-S3

PCE-VE 200-S3 is an industrial inspection camera, endoscope or borescope for the non-destructive evaluation (NDE) of engines, machines and more. This industrial borescope provides excellent image quality at an affordable price. An ideal tool for diagnosing issues in hard-to-reach places, the waterproof camera head features 6 LED lights with adjustable intensity for optimal illumination. In addition, digital image magnification or zoom of up to 4 times is available.


- 3.7 mm / 0.14 in diameter
- 3 m / 9.8 ft cable length
- 1600 x 1200 pixels JPEG image / 640 x 480 pixels AVI video

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-895

The dual infrared temperature meter is used for fast surface temperature measurement. The two laser points of the infrared temperature meter PCE-895 mark the exact measuring point and thus offer excellent assistance with the temperature measurement. 

 

- Temperature measurement up to 1600°C / 2912°F
Cross laser thermometer
K-Type or infrared measurement
- Optical resolution: 60:1
- Adjustable emissivity
- Can be calibrated
- Suitable for long-term measurements

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-895

The dual infrared thermometer is used for fast surface temperature measurement. The two laser points of the infrared thermometer PCE-895 mark the exact measuring point and thus offer excellent assistance with the temperature measurement. 

 

- Temperature measurement up to 1600°C / 2912°F
Cross laser thermometer
K-Type or infrared measurement
- Optical resolution: 60:1
- Adjustable emissivity
- Can be calibrated
- Suitable for long-term measurements

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 200-S3

PCE-VE 200-S3 is an industrial inspection camera, endoscope or borescope for the non-destructive evaluation (NDE) of engines, machines and more. This industrial borescope provides excellent image quality at an affordable price. An ideal tool for diagnosing issues in hard-to-reach places, the waterproof camera head features 6 LED lights with adjustable intensity for optimal illumination. In addition, digital image magnification or zoom of up to 4 times is available.


- 3.7 mm / 0.14 in camera diameter
- 3 m / 9.8 ft cable length
- 1600 x 1200 pixels JPEG image / 640 x 480 pixels AVI video

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 300C

The counting scales PCE-SD 300C are low-cost robust verifiable system balances. The calibration is according to the trading class M III. The sturdy foundation of the counting scales is made of painted steel and features a plastic-coated steel platform.


- Weighing capacity: 300 kg
- Readability: 100 g
- Minimum load: 2 kg
- Platform size: 400 x 500 mm
- Certifiable: M III

 

Manufacturer: PCE Instruments
Test Instruments manufacturer