The Multifunction Conductivity Meter PCE-PHD-1-KIT1 is a true all-rounder for checking water quality. The portable multifunction conductivity meter is used to control the water parameters pH, redox, conductivity, salinity, oxygen and is also very suitable for temperature measurement. Storage, electrolyte, conductance and calibration solutions are included in this comprehensive kit. 

- Measuring range: pH value: 0.00 ... 14.00 pH
- Conductivity: 0 ... 200 µS/cm, 0.2 ... 2.0 mS/cm, 2 ... 20.0 mS/cm, 20 ... 200 mS/cm
- TDS: 0 ... 132 ppm, 132 ... 1320 ppm, 1320 ... 13200 ppm, 13200 ... 132000 ppm
- Oxygen: 0 ... 20.0 mg/l 
- Temperature: 0 ... 60.0 °C / 32 ... 140 ºF
- 2 point calibration, pH4 + pH7

- incl. Storage solution
- incl. pH4 + pH7
- incl. Electrolyte solution
- incl. Conductance solution
- incl. Carrying case

The multifunction pH meter PCE-PHD-1-KIT1 is a true all-rounder for checking water quality. The portable multifunction pH meter is used to control the water parameters pH, redox, conductivity, salinity, oxygen and is also very suitable for temperature measurement. Storage, electrolyte, conductance and calibration solutions are included in this comprehensive kit. 

- Measuring range: pH value: 0.00 ... 14.00 pH
- Conductivity: 0 ... 200 µS/cm, 0.2 ... 2.0 mS/cm, 2 ... 20.0 mS/cm, 20 ... 200 mS/cm
- TDS: 0 ... 132 ppm, 132 ... 1320 ppm, 1320 ... 13200 ppm, 13200 ... 132000 ppm
- Oxygen: 0 ... 20.0 mg/l 
- Temperature: 0 ... 60.0 °C / 32 ... 140 ºF
- 2 point calibration, pH4 + pH7

- incl. Storage solution
- incl. pH4 + pH7
- incl. Electrolyte solution
- incl. Conductance solution
- incl. Carrying case

The pH / Conductivity / Salt / Oxygen Water Quality Data Logger PCE-PHD-1-KIT1 is a true all-rounder for checking water quality. The portable data logger is used to control the water parameters pH, redox, conductivity, salinity, oxygen and is also very suitable for temperature measurement. Storage, electrolyte, conductance and calibration solutions are included in this comprehensive kit. 

- Measuring range: pH value: 0.00 ... 14.00 pH
- Conductivity: 0 ... 200 µS/cm, 0.2 ... 2.0 mS/cm, 2 ... 20.0 mS/cm, 20 ... 200 mS/cm
- TDS: 0 ... 132 ppm, 132 ... 1320 ppm, 1320 ... 13200 ppm, 13200 ... 132000 ppm
- Oxygen: 0 ... 20.0 mg/l 
- Temperature: 0 ... 60.0 °C / 32 ... 140 ºF
- 2 point calibration, pH4 + pH7

- incl. Storage solution
- incl. pH4 + pH7
- incl. Electrolyte solution
- incl. Conductance solution
- incl. Carrying case

The water analysis meter PCE-PHD-1-KIT1 is a true all-rounder for checking water quality. The portable water analysis meter is used to control the water parameters pH, redox, conductivity, salinity, oxygen and is also very suitable for temperature measurement. Storage, electrolyte, conductance and calibration solutions are included in this comprehensive kit. 

- Measuring range: pH value: 0.00 ... 14.00 pH
- Conductivity: 0 ... 200 µS/cm, 0.2 ... 2.0 mS/cm, 2 ... 20.0 mS/cm, 20 ... 200 mS/cm
- TDS: 0 ... 132 ppm, 132 ... 1320 ppm, 1320 ... 13200 ppm, 13200 ... 132000 ppm
- Oxygen: 0 ... 20.0 mg/l 
- Temperature: 0 ... 60.0 °C / 32 ... 140 ºF
- 2 point calibration, pH4 + pH7

- incl. Storage solution
- incl. pH4 + pH7
- incl. Electrolyte solution
- incl. Conductance solution
- incl. Carrying case

- Measuring range: 0.00 ... 14.00 pH
- normal to medium force
- high force
- Normal beakers and containers
- deep containers up to 140 mm / 5.5 in
- liquids (low viscosity)
- viscous media (low to medium viscosity)

The SKM 1.0 Automotive Tester precisely measures closing forces to prevent personal injuries. The closing Automotive Tester is suitable for measuring forces in the field of automatic doors, windows, and cut off walls; such as in warehouses, general stores, and public offices. The Automotive Tester is delivered manufacturer calibrated and can optionally be certified to ISO standards.

- Measurement range: 1000 N
- Resolution: 1 N
- Accuracy: ± 3 N
- External load cell

 

The SKM 1.0 Force Gauge precisely measures closing forces to prevent personal injuries. The closing Force Gauge is suitable for measuring forces in the field of automatic doors, windows, and cut off walls; such as in warehouses, general stores, and public offices. The Force Gauge is delivered manufacturer calibrated and can optionally be certified to ISO standards.

- Measurement range: 1000 N
- Resolution: 1 N
- Accuracy: ± 3 N
- External load cell

 

PCE-SC 10 is a class 1 acoustic or sound calibrator used to calibrate microphones, sound pressure level (SPL) meters and other noise measuring devices. Suitable for use with type 1 or class I noise measuring instruments, this portable decibel (db) meter calibrator is easy to use in the field or the laboratory.

- Frequency: 1000 Hz / ± 0.5 %
- Sound pressure levels: 94 dB and 114 dB
- Accuracy: ± 0.3 dB
- Standards are IEC60942:2003 Class 1, ANSI S1.40-1984, GB/T 15173-1994

 

PCE-SC 10 is a class 1 acoustic or sound calibrator used to calibrate microphones, sound pressure level (SPL) meters and other noise measuring devices. Suitable for use with type 1 or class I noise measuring instruments, this portable decibel (db) meter calibrator is easy to use in the field or the laboratory.

- Frequency: 1000 Hz / ± 0.5 %
- Sound pressure levels: 94 dB and 114 dB
- Accuracy: ± 0.3 dB
- Standards are IEC60942:2003 Class 1, ANSI S1.40-1984, GB/T 15173-1994

The robust counting scales is a real all-rounder. The stand of the counting scales can be easily separated along with the tripod mount from the platform and possibly sunk into the workbench. The cable between the platform and the display has a plug attached and is about 1.6 m long.

- Weighing range: 60/150 kg
- Readability: 10/20 g
- P2 - weighing surface: 500 x 600 mm
- Removable tripod
- Incl. ISO calibration certificate

The robust counting scales is a real all-rounder. The stand of the counting scales can be easily separated along with the tripod mount from the platform and possibly sunk into the workbench. The cable between the platform and the display has a plug attached and is about 1.6 m long.

- Weighing range: 15/30 kg
- Readability: 2/5 g
- P2 - weighing surface: 500 x 600 mm
- Removable tripod
- Incl. ISO calibration certificate

PCE-WP24 is a damp meter for wood used to perform noninvasive, nondestructive moisture measurements of wood, timber and other construction or building materials. An ideal tool for assessing everything from lumber to floors and more, this moisture meter uses electromagnetic waves that penetrate approximately 50 mm / 1.96 inches to 60 mm / 2.36 inches deep (depending on substrate) to return a mean-value moisture content percentage.

- Moisture content measuring range: 4% ... 60% wood, 0% ... 10% building
  materials
- Resolution: 0.1%
- Accuracy: ±0.7%

 

The data logger PCE-KD3 was developed to measure and record measured values ​​of standard analog signals or temperature sensors. In addition, the data logger PCE-KD3 can visualize the measured values ​​graphically. The PCE-KD3 is optionally equipped with 1, 4 or 8 measuring channels.

- Analog inputs: 4 ... 20-mA / 0 ... 10V, RTD / TC (selectable)
- Digital input: 24V DC
- Resolution: 12 bits
- Measuring channels: Maximum 8 (selectable)

Note: This item must be configured before ordering!

The digital thermometer PCE-893-ICA is suitable for simple temperature measurements. The emissivity of the surface can be adjusted on the PCE-893-ICA digital thermometer. Thus, the digital thermometer PCE-893-ICA is suitable for almost all surfaces.

Infrared measurement
- Measuring range: -50 ... 1200 °C / -58 ... 2192 °F
Thermoelement  
- Measuring range: -50 ... 1370 °C / -58 ... 2498 °F
- Optical resolution 50:1 infrared optics
- Adjustable emissivity
- Thermocouple type-K can be connected
- includes ISO Calibration Certificate

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Accuracy: ± (0.02 pH + 2d)
- Memory: flexible via SD card memory 1 ... 16 GB
- Interface: RS -232
- Suitable for foods such as sausage, meat, cheese...
- Incl. ISO calibration

The HVAC meter PCE-893-ICA is suitable for simple temperature measurements. The emissivity of the surface can be adjusted on the PCE-893-ICA HVAC meter. Thus, the HVAC meter PCE-893-ICA is suitable for almost all surfaces.

Infrared measurement
- Measuring range: -50 ... 1200 °C / -58 ... 2192 °F
Thermoelement  
- Measuring range: -50 ... 1370 °C / -58 ... 2498 °F
- Optical resolution 50:1 infrared optics
- Adjustable emissivity
- Thermocouple type-K can be connected
- includes ISO Calibration Certificate

The infrared thermometer PCE-893-ICA is suitable for simple temperature measurements. The emissivity of the surface can be adjusted on the PCE-893-ICA infrared thermometer. Thus, the infrared thermometer PCE-893-ICA is suitable for almost all surfaces.

Infrared measurement
- Measuring range: -50 ... 1200 °C / -58 ... 2192 °F
Thermoelement  
- Measuring range: -50 ... 1370 °C / -58 ... 2498 °F
- Optical resolution 50:1 infrared optics
- Adjustable emissivity
- Thermocouple type-K can be connected
- includes ISO Calibration Certificate

PCE-WP24 is a moisture tester or meter for wood used to perform noninvasive, nondestructive moisture measurements of wood, timber and other construction or building materials. An ideal tool for assessing everything from lumber to floors and more, this moisture meter uses electromagnetic waves that penetrate approximately 50 mm / 1.96 inches to 60 mm / 2.36 inches deep (depending on substrate) to return a mean-value moisture content percentage.

- Moisture content measuring range: 4% ... 60% wood, 0% ... 10% building
  materials
- Resolution: 0.1%
- Accuracy: ±0.7%

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Accuracy: ± (0.02 pH + 2d)
- Memory: flexible via SD card memory 1 ... 16 GB
- Interface: RS -232
- Suitable for foods such as sausage, meat, cheese...
- Incl. ISO calibration

The pyrometer PCE-893-ICA is suitable for simple temperature measurements. The emissivity of the surface can be adjusted on the PCE-893-ICA pyrometer. Thus, the pyrometer PCE-893-ICA is suitable for almost all surfaces.

Infrared measurement
- Measuring range: -50 ... 1200 °C / -58 ... 2192 °F
Thermoelement  
- Measuring range: -50 ... 1370 °C / -58 ... 2498 °F
- Optical resolution 50:1 infrared optics
- Adjustable emissivity
- Thermocouple type-K can be connected
- includes ISO Calibration Certificate