Industrial Measurement Products and Solutions
Order no.: CA-D37N

The CA-D37N D Series Clamp on Tester for oscilloscopes has a high-quality iron core with evenly distributed windings. This allows accurate AC current measurement, even at currents up to 3000 A. Due to the rectangular shape, the Clamp on Tester is particularly suitable for busbars and cables with a large cross section. The Clamp on Tester adapter comes manufacturer calibrated with ISO calibration as an option.
- Measuring range: 1 A to 30 A, 1 A to 300 A, 1 A to 3000 A
- Transformer Ratio: 1 A / 1 V, 100 A / 1 V, 1000 A / 1 V
- Connection: 4 mm / 0.2 in socket

Manufacturer: Chauvin Arnoux GmbH
Test Instruments manufacturer
Order no.: CA-D37N

The CA-D37N D Series Current Clamp for oscilloscopes has a high-quality iron core with evenly distributed windings. This allows accurate AC current measurement, even at currents up to 3000 A. Due to the rectangular shape, the Current Clamp is particularly suitable for busbars and cables with a large cross section. The Current Clamp adapter comes manufacturer calibrated with ISO calibration as an option.
- Measuring range: 1 A to 30 A, 1 A to 300 A, 1 A to 3000 A
- Transformer Ratio: 1 A / 1 V, 100 A / 1 V, 1000 A / 1 V
- Connection: 4 mm / 0.2 in socket

Manufacturer: Chauvin Arnoux GmbH
Test Instruments manufacturer
Order no.: PCE-VMI 10

The PCE-VMI Electromagnetic Flow Meter can be used in the construction of machines and plants thanks to its compact design. The PCE-VMI Electromagnetic Flow Meter is used where flow meters with moving parts such as vane flow meters cannot be used due to the dirt. Flow Meter to measure all electrically conductive liquids / without any moving part / without mechanical wear / no additional pressure drop.


- Measuring range: 2 ... 40 l/min
- Measurement accuracy: ± 1% of measured value
- Signal output from: approx. 1 l/min
- Process connection: G½-ISO 228 external

 

Manufacturer: SIKA Dr. Siebert & Kühn GmbH & Co. KG
Test Instruments manufacturer
Order no.: PCE-VMI 7

The PCE-VMI Electromagnetic Flow Meter can be used in the construction of machines and plants thanks to its compact design. The PCE-VMI Electromagnetic Flow Meter is used where flow meters with moving parts such as vane flow meters cannot be used due to the dirt..Flow Meter to measure all electrically conductive liquids / without any moving part / without mechanical wear / no additional pressure drop.


- Measuring range: 1 ... 20 l/min
- Measurement accuracy: ± 2% of measured value
- Signal output from: approx. 0.5 l/min
- Process connection: G½-ISO 228 external

 

Manufacturer: SIKA Dr. Siebert & Kühn GmbH & Co. KG
Test Instruments manufacturer
Order no.: PCE-ISFET-LanceFET + H
- Measuring range: 0.00 ... 14.00 pH
- normal to medium force
- high force
- Normal beakers and containers
- Liquids (low viscosity)
- viscous media (low to medium viscosity)
- Pasty media (medium to high viscosity)
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-895

The dual infrared digital thermometer is used for fast surface temperature measurement. The two laser points of the infrared digital thermometer PCE-895 mark the exact measuring point and thus offer excellent assistance with the temperature measurement. 

 

- Temperature measurement up to 1600°C / 2912°F
Cross laser thermometer
K-Type or infrared measurement
- Optical resolution: 60:1
- Adjustable emissivity
- Can be calibrated
- Suitable for long-term measurements

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DDA 10-ICA

The PCE-DDA 10 shore durometer is an ergonomic device to check Shore hardness in gum, plastic and other non-metallic materials. It has been designed with a very high quality. The PCE-DDA 10 durometer is mainly used for soft gums, elastomers, natural rubber, neoprenes, casting resin, white PVC, leather, etc. It has a reading accuracy of 0.1 hardness units.


- Handheld device
- For Shore A measurements
- Single and Serial Measurements
- Data transfer to pc
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DDA 10-ICA

The PCE-DDA 10 shore hardness tester is an ergonomic device to check Shore hardness in gum, plastic and other non-metallic materials. It has been designed with a very high quality. The PCE-DDA 10 hardness tester is mainly used for soft gums, elastomers, natural rubber, neoprenes, casting resin, white PVC, leather, etc. It has a reading accuracy of 0.1 hardness units.


- Handheld device
- For Shore A measurements
- Single and Serial Measurements
- Data transfer to pc
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-895

The dual infrared thermometer is used for fast surface temperature measurement.The two laser points of the infrared thermometer PCE-895 mark the exact measuring point and thus offer excellent assistance with the temperature measurement.

- Temperature measurement up to 1600 °C / 2912 °F
- Cross laser thermometer
- K-Type or infrared measurement
- Optical resolution 60:1
- Adjustable emissivity
- Can be calibrated
- Suitable for long-term measurements

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-895

The dual infrared pyrometer is used for fast surface temperature measurement. The two laser points of the pyrometer PCE-895 mark the exact measuring point and thus offer excellent assistance with the temperature measurement. 

 

- Temperature measurement up to 1600°C / 2912°F
Cross laser thermometer
K-Type or infrared measurement
- Optical resolution: 60:1
- Adjustable emissivity
- Can be calibrated
- Suitable for long-term measurements

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-895

The dual infrared temperature meter is used for fast surface temperature measurement. The two laser points of the infrared temperature meter PCE-895 mark the exact measuring point and thus offer excellent assistance with the temperature measurement. 

 

- Temperature measurement up to 1600°C / 2912°F
Cross laser thermometer
K-Type or infrared measurement
- Optical resolution: 60:1
- Adjustable emissivity
- Can be calibrated
- Suitable for long-term measurements

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-895

The dual infrared thermometer is used for fast surface temperature measurement. The two laser points of the infrared thermometer PCE-895 mark the exact measuring point and thus offer excellent assistance with the temperature measurement. 

 

- Temperature measurement up to 1600°C / 2912°F
Cross laser thermometer
K-Type or infrared measurement
- Optical resolution: 60:1
- Adjustable emissivity
- Can be calibrated
- Suitable for long-term measurements

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DDD 10-ICA

The PCE-DDD 10 shore durometer is an ergonomic device to check Shore D hardness in materials such as hard rubber and thermoplastic. It has been designed with a very high quality.


- Handheld device
- For Shore D measurements
- Single and Serial measurements
- Data transfer to PC
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DDD 10-ICA

The PCE-DDD 10 shore hardness tester is an ergonomic device to check Shore D hardness in materials such as hard rubber and thermoplastic. It has been designed with a very high quality.


- Handheld device
- For Shore D measurements
- Single and Serial measurements
- Data transfer to PC
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-009

This air flow meter has a good relation between price and quality and it combines accuracy and versatility with the ability to transfer data directly to a computer. This air flow meter forms a part of a professional's basic equipment to regulate and test ventilation systems. All the test instruments come manufacturer calibrated. ISO certification can be made as an option.


- Measurement range: 0.2 ... 20.0 m/s
- Measurement range: 0.0 ... 50.0°C / 32 ... 122°F (sensor)
- Volume of air current:  0 ... 36,000 m3/min
- Internal memory: 16,000 values
- Sampling rate: 1 sec

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-009

Data logger to measure air temperature and velocity with calculation of volume of air current and RS-232. These logging test instruments are calibrated by the manufacturer. An ISO calibration certificate is available as an option.


- Measurement range: 0.2 ... 20.0 m/s
- Measurement range: 0.0 ... 50.0°C / 32 ... 122°F (sensor)
- Volume of air current:  0 ... 36,000 m3/min
- Internal memory: 16,000 values
- Sampling rate: 1 sec

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-009

This air velocity meter has a good relation between price and quality and it combines accuracy and versatility with the ability to transfer data directly to a computer. This air velocity meter forms a part of a professional's basic equipment to regulate and test ventilation systems. All the test instruments come manufacturer calibrated. ISO certification can be made as an option.


- Measurement range air velocity: 0.2 to 20.0 m/s
- Measurement range: 0.2 ... 20.0 m/s
- Measurement range: 0.0 ... 50.0°C / 32 ... 122°F (sensor)
- Volume of air current:  0 ... 36,000 m3/min
- Internal memory: 16,000 values
- Sampling rate: 1 sec

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 300C

The counting scales PCE-SD 300C are low-cost robust verifiable system balances. The calibration is according to the trading class M III. The sturdy foundation of the counting scales is made of painted steel and features a plastic-coated steel platform.


- Weighing capacity: 300 kg
- Readability: 100 g
- Minimum load: 2 kg
- Platform size: 400 x 500 mm
- Certifiable: M III

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PDA 1L

The differential pressure meter PCE-PDA 1L is a reliable differential pressure gauge for pressure measurement of gasses in the range of ± 2 kPa. The differential pressure meter PCE-PDA 1L has many different pressure measuring functions.

- Measuring range pressure: ± 2 kPa  /  ± 15 mmHg /  ± 0.29 PSI
- Resolution: 0.1/1 Pa
- Accuracy: ± 0.5% of final value
- Min and Max value memory
- Datalogger and leak test
- Temperature measurement, flow measurement

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-009

This hot wire wind measurer has a good relation between price and quality and it combines accuracy and versatility with the ability to transfer data directly to a computer. This hot wire wind measurer forms a part of a professional's basic equipment to regulate and test ventilation systems. All the test instruments come manufacturer calibrated. ISO certification can be made as an option.


- Measurement range: 0.2 ... 20.0 m/s
- Measurement range: 0.0 ... 50.0°C / 32 ... 122°F (sensor)
- Volume of air current:  0 ... 36,000 m3/min
- Internal memory: 16,000 values
- Sampling rate: 1 sec

 

Manufacturer: PCE Instruments
Test Instruments manufacturer