Industrial Measurement Products and Solutions
Order no.: PCE-BFT 2

This practical and handy brake fluid tester in pen format should not be missing in any car or hobby workshop. With the brake fluid tester, the water content in the brake fluid can be checked quickly and precisely. The LC display shows exactly the water content in the brake fluid. So it can be recognized exactly when the brake fluid must be changed.

 

- To determine the quality of the brake fluid
- Adjustment of the brake fluid tester possible
- Fast and accurate results
- Suitable for DOT3, DOT4 and DOT5.1

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CBA 10

The Automotive Tester PCE-CBA 10 can be used as a car battery tester. To test the battery, the automotive tester can measure, inter alia, the starting current to determine the capacity of the car battery in the range between 30 and 100 Ah.

- For 12V starter batteries
- Cold start current CCA:  100 ... 1700 A
- Battery capacity:  30 Ah ... 100 Ah
- Battery standards:  DIN, JIS, EN, IEC, SAE, GB & MCA

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-S 40

The PCE-S 40 is an automotive-testing acoustic stethoscope which amplifies machine noises. An acoustic stethoscope makes it possible to detect noises in bearings, fan flaps, pumps and similar parts. In mechanical engineering, it is used for preventive maintenance to diagnose potential machine faults before they arise.


- Measuring tip: approx. 16.5 cm
- Earpieces made of soft plastic
- Total length: approx. 1 m
- Tight ear clips

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DC 10
The automotive tester is an ideal measuring device for the fast measurement of currents and voltages. To perform current measurements, a automotive tester must be connected in series to the load.

Measuring function
- AC power
- AC voltage
- DC voltage
- Resistance
- Frequency
- Duty cycle
- Three measurements per second
- "SMART" function facilitates operation
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CBA 10

 

The Car Measuring Device PCE-CBA 10 can be used as a car battery tester. To test the battery, the car measuring device can measure, inter alia, the starting current to determine the capacity of the car battery in the range between 30 and 100 Ah.

 

- For 12V starter batteries
- Cold start current CCA:  100 ... 1700 A
- Battery capacity:  30 Ah ... 100 Ah
- Battery standards:  DIN, JIS, EN, IEC, SAE, GB & MCA

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: Koff-GR
Provides protection when transporting and storing the measuring instruments as well as their accessories.
Manufacturer: KKC cases GmbH
Test Instruments manufacturer
Order no.: PCE-DC 10
The clamp meter is an ideal measuring device for the fast measurement of currents and voltages. To perform current measurements, a clamp meter must be connected in series to the load.

Measuring function
- AC power
- AC voltage
- DC voltage
- Resistance
- Frequency
- Duty cycle
- Three measurements per second
- "SMART" function facilitates operation
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DC 10
The clamp on tester is an ideal measuring device for the fast measurement of currents and voltages. To perform current measurements, a clamp on tester must be connected in series to the load.

Measuring function
- AC power
- AC voltage
- DC voltage
- Resistance
- Frequency
- Duty cycle
- Three measurements per second
- "SMART" function facilitates operation
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PI1

This Condition Monitoring Phase Rotation Meter PCE-PI1 has a robust housing with a large LCD display so you can easily and conveniently determine the phase and motor rotation direction. Furthermore, any problems in individual phases, are displayed on the phase rotation meter. The condition monitoring phase rotation meter meets the safety standard CAT III 600 V, IEC 61010.


- Easy operation
- No batteries required
- Robust alligator clips for easy connection
- 3-phase measurements of 40 ... 690 V AC
- Protection class IP 40

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-S 40

The PCE-S 40 is a condition monitoring stethoscope which amplifies machine noises. An acoustic stethoscope makes it possible to detect noises in bearings, fan flaps, pumps and similar parts. In mechanical engineering, it is used for preventive maintenance to diagnose potential machine faults before they arise.


- Measuring tip: approx. 16.5 cm
- Earpieces made of soft plastic
- Total length: approx. 1 m
- Tight ear clips

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DC 10
The current clamp is an ideal measuring device for the fast measurement of currents and voltages. To perform current measurements, a current clamp must be connected in series to the load.

Measuring function
- AC power
- AC voltage
- DC voltage
- Resistance
- Frequency
- Duty cycle
- Three measurements per second
- "SMART" function facilitates operation
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-ITF 10

PCE-ITF 10 is a portable handheld digital infrared thermometer gun or laser pyrometer that uses an infrared (IR) sensor to measure temperature in degrees Celsius (°C) or Fahrenheit (°F) without contact. This non-contact IR temperature meter can be used to detect leaks in walls, ducts, ventilation systems and more.


- Measuring range: -50 ... 380°C / -58 ... 716°F
- Accuracy: ± 3% -50 ... 20°C / -58 ... 68°F
                 ± 1% / ± 1°C / 1.8°F, 20 ... 380°C / 68 ... 716°F
- Optical resolution: 20:1
- Spectral range: 8 ... 14 μm
- Fixed emissivity: 0.95

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DC 10
The digital multimeter is an ideal measuring device for the fast measurement of currents and voltages. To perform current measurements, a digital multimeter must be connected in series to the load.

Measuring function
- AC power
- AC voltage
- DC voltage
- Resistance
- Frequency
- Duty cycle
- Three measurements per second
- "SMART" function facilitates operation
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-670
Digital thermometer PCE-670 for non-contact measurement of surface temperature. The PCE-670 digital thermometer has a display of the current temperature during the measurement. Within one second you get the surface temperature - the non-contact measuring method even from hot, dangerous or difficult to reach objects.

- IR temperature measuring range: -33 ... 500°C / -27.4 ... 932°F
- Accuracy: ± 2% of v. Mw. or ± 2°C / 3.6°F
- Measured value display optionally in °C or °F
- Measurement spot ratio 9: 1
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CBA 10

The Electrical Tester PCE-CBA 10 can be used as a car battery tester. To test the battery, the electrical tester can measure, inter alia, the starting current to determine the capacity of the car battery in the range between 30 and 100 Ah.

- For 12V starter batteries
- Cold start current CCA:  100 ... 1700 A
- Battery capacity:  30 Ah ... 100 Ah
- Battery standards:  DIN, JIS, EN, IEC, SAE, GB & MCA

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DC 10
The electrical tester is an ideal measuring device for the fast measurement of currents and voltages. To perform current measurements, a electrical tester must be connected in series to the load.

Measuring function
- AC power
- AC voltage
- DC voltage
- Resistance
- Frequency
- Duty cycle
- Three measurements per second
- "SMART" function facilitates operation
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PHM 12
The environmental meter PCE-PHM 12 has been specially developed for the pH measurement in aquariums. The aquarium environmental meter can be attached to any aquarium with the included universal holder. The built-in temperature probe on the aquarium environmental meter is not only used for temperature indication but also for temperature compensation.

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Accuracy: ± 0.1 pH
- Temperature compensation up to 50°C / 122°F
- Universal mounting bracket
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PHM 12
The aquarium environmental tester PCE-PHM 12 has been specially developed for the pH measurement in aquariums. The aquarium environmental tester can be attached to any aquarium with the included universal holder. The built-in temperature probe on the aquarium environmental tester is not only used for temperature indication but also for temperature compensation.

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Accuracy: ± 0.1 pH
- Temperature compensation up to 50°C / 122°F
- Universal mounting bracket
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: GB-50-28-PCE-VE
- Guide ball 50mm for endoscope cable with camera head 28mm diameter
Test Instruments manufacturer
Order no.: PCE-670
HVAC meter PCE-670 for non-contact measurement of surface temperature. The PCE-670 HVAC meter has a display of the current temperature during the measurement. Within one second you get the surface temperature - the non-contact measuring method even from hot, dangerous or difficult to reach objects.

- IR temperature measuring range: -33 ... 500°C / -27.4 ... 932°F
- Accuracy: ± 2% of v. Mw. or ± 2°C / 3.6°F
- Measured value display optionally in °C or °F
- Measurement spot ratio 9: 1
Manufacturer: PCE Instruments
Test Instruments manufacturer