Industrial Measurement Products and Solutions
Order no.: PCE-SD 6000E SST

The stainless steel floor scale is made entirely of high quality, acid resistant stainless steel. The weighing cells installed in the stainless steel floor scale have a protection class of IP68.

 

- Weighing range : 6000 kg
- Readability : 2 kg
- Taring range: over the entire weighing range
- Includes initial verification
- Calibratable M III

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-432-EKIT

The outdoor construction noise meter PCE-432 is used to measure the noise on building sites. This outdoor construction noise meter meets the requirements of class 1 sound level meters. In addition to the analysis of the building noise in octave band or optionally in 1/3 octave band, the construction noise meter is able to determine the exact position of the sound level meter via GPS. The measuring range of the outdoor construction noise meter extends from 25 ... 136 dbA at a building noise frequency between 20 Hz and 12.5 kHz.

 

- Accuracy class 1
- GPS function
- A, B, C & Z frequency rating
- Fast, Slow, Pulse and Peak time weighting
- Statistics function
- 1/1 octave band included
- 1/3 octave band optional
- Incl. ISO calibration certificate 
- Incl. Outdoor Alarm Noise Meter Kit PCE-4xx-EKIT
- Outdoor measurement of construction noise

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-432-EKIT

The Class 1 outdoor decibel meter PCE-432-EKIT can be used, e.g, for sound measurement of street noise, aircraft and train noise, event noise, noise coming from construction sites, ports, factories involving heavy machinery, airport/bus stations, stadiums, horse/motor racing tracks etc. The weather conditions do not matter, and hail, snow, rain and similar are no problem for this system for outdoor noise monitoring. The outdoor decibel meter is equipped with a GPS receiver which allows the user to assign the measured values to an exact position.

 

- Accuracy class 1
- GPS function
- A, B, C & Z frequency rating
- Fast, Slow, Pulse and Peak time weighting
- Statistics function
- 1/1 octave band included
- 1/3 octave band optional
- Incl. ISO calibration certificate 
- Incl. Outdoor Alarm Noise Meter Kit PCE-4xx-EKIT
- Outdoor measurement of sound and noise

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-432-EKIT

The Class 1 outdoor noise dose meter PCE-432-EKIT can be used, e.g, for sound measurement of street noise, aircraft and train noise, event noise, noise coming from construction sites, ports, factories involving heavy machinery, airport/bus stations, stadiums, horse/motor racing tracks etc. The weather conditions do not matter, and hail, snow, rain and similar are no problem for this system for outdoor noise monitoring. The outdoor noise dose meter is equipped with a GPS receiver which allows the user to assign the measured values to an exact position.

 

- Accuracy class 1
- GPS function
- A, B, C & Z frequency rating
- Fast, Slow, Pulse and Peak time weighting
- Statistics function
- 1/1 octave band included
- 1/3 octave band optional
- Incl. ISO calibration certificate 
- Incl. Outdoor Alarm Noise Meter Kit PCE-4xx-EKIT
- Outdoor measurement of sound and noise

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-432-EKIT

The Class 1 outdoor sound level meter PCE-432-EKIT can be used, e.g, for sound measurement of street noise, aircraft and train noise, event noise, noise coming from construction sites, ports, factories involving heavy machinery, airport/bus stations, stadiums, horse/motor racing tracks etc. The weather conditions do not matter, and hail, snow, rain and similar are no problem for this system for outdoor noise monitoring. The outdoor sound level meter is equipped with a GPS receiver which allows the user to assign the measured values to an exact position.

 

- Accuracy class 1
- GPS function
- A, B, C & Z frequency rating
- Fast, Slow, Pulse and Peak time weighting
- Statistics function
- 1/1 octave band included
- 1/3 octave band optional
- Incl. ISO calibration certificate 
- Incl. Outdoor Alarm Noise Meter Kit PCE-4xx-EKIT
- Outdoor measurement of sound and noise

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-432-EKIT

The Class 1 outdoor SPL meter PCE-432-EKIT can be used, e.g, for sound measurement of street noise, aircraft and train noise, event noise, noise coming from construction sites, ports, factories involving heavy machinery, airport/bus stations, stadiums, horse/motor racing tracks etc. The weather conditions do not matter, and hail, snow, rain and similar are no problem for this system for outdoor noise monitoring. The outdoor SPL meter is equipped with a GPS receiver which allows the user to assign the measured values to an exact position.

 

- Accuracy class 1
- GPS function
- A, B, C & Z frequency rating
- Fast, Slow, Pulse and Peak time weighting
- Statistics function
- 1/1 octave band included
- 1/3 octave band optional
- Incl. ISO calibration certificate 
- Incl. Outdoor Alarm Noise Meter Kit PCE-4xx-EKIT
- Outdoor measurement of sound and noise

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VM 31-HAWB

The PCE-VM 31-HAWB Condition Monitoring Human Vibration Meter is designed for measuring human vibration at the workplace. The Condition Monitoring Vibration Meter can calculate hand-arm vibration measurements according to ISO 5349 and whole-body vibration measurements according to ISO 2631. Each sensor consists of a triaxial Vibration Meter that captures acceleration, velocity, and displacement measurements.


- Measuring of human vibration at the workplace
- Velocity, acceleration, displacement
- 3 channel FFT
- TEDS support

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VM 31-HAWB

The PCE-VM 31-HAWB Human Vibration Analyzer is designed for measuring human vibration at the workplace. The Vibration Analyzer can calculate hand-arm vibration measurements according to ISO 5349 and whole-body vibration measurements according to ISO 2631. Each sensor consists of a triaxial Vibration Analyzer that captures acceleration, velocity, and displacement measurements.


- Measuring of human vibration at the workplace
- Velocity, acceleration, displacement
- 3 channel FFT
- TEDS support

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VM 31-HAWB

The PCE-VM 31-HAWB Human Vibration Meter is designed for measuring human vibration at the workplace. The Vibration Meter can calculate hand-arm vibration measurements according to ISO 5349 and whole-body vibration measurements according to ISO 2631. Each sensor consists of a triaxial Vibration Meter that captures acceleration, velocity, and displacement measurements.


- Measuring of human vibration at the workplace
- Velocity, acceleration, displacement
- 3 channel FFT
- TEDS support

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VM 31-HAWB

The PCE-VM 31-HAWB Tri-Axial Accelerometer or Human Vibration Analyzer is designed for measuring human vibration at the workplace. The Vibration Analyzer can calculate hand-arm vibration measurements according to ISO 5349 and whole-body vibration measurements according to ISO 2631. Each sensor consists of a triaxial Vibration Analyzer that captures acceleration, velocity, and displacement measurements.


- Measuring of human vibration at the workplace
- Velocity, acceleration, displacement
- 3 channel FFT
- TEDS support

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VM 31-HAWB
The PCE-VM 31-HAWB Vibration Test Instrument or Analyzer is designed for measuring human vibration at the workplace. The Vibration Analyzer can calculate hand-arm vibration measurements according to ISO 5349 and whole-body vibration measurements according to ISO 2631. Each sensor consists of a triaxial Vibration Analyzer that captures acceleration, velocity, and displacement measurements.

- Measuring of human vibration at the workplace
- Velocity, acceleration, displacement
- 3 channel FFT
- TEDS support

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-5000

PCE-5000 is a portable material hardness tester that uses the ASTM A1038 ultrasonic contact impedance (UCI) method to measure the hardness of metals and alloys with a minimum thickness of 2 mm / .08 in. Non-destructive testing produces microscopic indentation.


- Displays measurements in Rockwell A (HRA), Rockwell B (HRB), Rockwell C
  (HRC), Brinell (HB), Vickers (HV) and MPa (N/mm²) SI units
- Measurement ranges:
  61 … 85.6 HRA, 41 … 100 HRB, 20.3 … 68 HRC, 85 … 650 HB, 50 … 999 HV,
  255 … 2180 MPa (N/mm²)

- Accuracy: ± 1.5 HR, ± 3% HB, ± 3% HV
- Memory size: 1,000 groups for measurement data and 20 groups for
  calibration data
- Different probe types (also automatic motorized probes) available

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-5000

PCE-5000 is a portable hardness tester or durometer that uses the ASTM A1038 ultrasonic contact impedance (UCI) method to measure the hardness of metals and alloys to measure on a minimum material thickness of 2 mm / .08 in. The test instrument can be mounted on a test stand (as an option) for series measurement in manufacturing process checking. Non-destructive testing produces microscopic indentation.


- Displays measurements in Rockwell A (HRA), Rockwell B (HRB), Rockwell C
  (HRC), Brinell (HB), Vickers (HV) and MPa (N/mm?) SI units
- Measurement ranges:
  61 … 85.6 HRA, 41 … 100 HRB, 20.3 … 68 HRC,
  85 … 650 HB, 50 … 999 HV, 255 … 2180 MPa (N/mm²)

- Accuracy: ± 1.5 HR, ± 3% HB, ± 3% HV
- Memory size: 1,000 groups for measurement data and 20 groups for
  calibration data
- Different probe types (also automatic probes) available

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-5000

PCE-5000 is a portable hardness tester that uses the ASTM A1038 ultrasonic contact impedance (UCI) method to measure the hardness of metals and alloys with a minimum thickness of 2 mm / .08 in Non-destructive testing produces microscopic indentation.


- Displays measurements in Rockwell A (HRA), Rockwell B (HRB), Rockwell C
  (HRC), Brinell (HB), Vickers (HV) and MPa (N/mm?) SI units
- Measurement ranges:
  61 … 85.6 HRA, 41 … 100 HRB, 20.3 … 68 HRC,
  85 … 650 HB, 50 … 999 HV, 255 … 2180 MPa (N/mm²)

- Accuracy: ± 1.5 HR, ± 3% HB, ± 3% HV
- Memory size: 1,000 groups for measurement data and 20 groups for
  calibration data
- Different probe types (also automatic probes) available

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-5000

PCE-5000 is a portable hardness tester that uses the ASTM A1038 ultrasonic contact impedance (UCI) method to measure the hardness of metals and alloys with a minimum thickness of 2 mm / .08 in. Non-destructive testing produces microscopic indentation.


- Displays measurements in Rockwell A (HRA), Rockwell B (HRB), Rockwell C
  (HRC), Brinell (HB), Vickers (HV) and MPa (N/mm²) SI units
- Measurement ranges:
  61 … 85.6 HRA, 41 … 100 HRB, 20.3 … 68 HRC,
  85 … 650 HB, 50 … 999 HV, 255 … 2180 MPa (N/mm²)

- Accuracy: ± 1.5 HR, ± 3% HB, ± 3 % HV
- Memory size: 1,000 groups for measurement data and 20 groups for
  calibration data
- Different probe types (also automatic probes) available

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: Viscolite d15

Viscolite d15 is a portable resonant or vibrational viscometer used in industrial and research applications to measure viscosity in very small to large samples 10 ml / 10cc / 0.39 oz and up. Featuring a built-in thermometer and a nearly maintenance-free design with no openly rotating parts, this handheld viscometer is delivered with one 316L stainless steel measuring probe and displays measurements in centipoise (cP). The energy loss measurement during vibration yields very high accuracy in very small vessels.


- Uses resonant vibration to measure fluid viscosity
- Viscosity range: 0 ... 5,000 cP (mPa.S)
- Reproducibility is better than 1% 
- Small sample of only 10 cc required
- No moving parts to damage, easy cleanup, and virtually maintenance free 

 

Manufacturer: Hydramotion
Test Instruments manufacturer
Order no.: PCE-PQC 22EU
The Dust Monitor PCE-PQC 22EU detects quickly where eg particles, air particles contaminate the air and can cause diseases such as asthma, bronchitis, skin and lung diseases.

- Measuring range: 0.3 ... 25 μm
- Measuring channel sizes: 0.3, 0.5, 1.0, 3.0, 5.0, 10.0 μm
- Counting efficiency: 50% at 0.3 μm 100% at > 0.45 μm according to JIS
- ISO 14644-1, EU GMP Annex I, FS 209E
- Mass concentration
- Ethernet, USB
- CO2 sensor
Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PQC 22EU
The particle counter PCE-PQC 22EU detects quickly where eg particles, air particles contaminate the air and can cause diseases such as asthma, bronchitis, skin and lung diseases.

- Measuring range: 0.3 ... 25 μm
- Measuring channel sizes: 0.3, 0.5, 1.0, 3.0, 5.0, 10.0 μm
- Counting efficiency: 50% at 0.3 μm 100% at > 0.45 μm according to JIS
- ISO 14644-1, EU GMP Annex I, FS 209E
- Mass concentration
- Ethernet, USB
- CO2 sensor
Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: HOMMEL ETAMIC W10

Material tester Hommel Etamic W10 is a portable instrument for measuring roughness. The material tester measures all common roughness variables according to international standards such as DIN EN ISO or ISO MOTIF.


- Measuring range: -210 ... 110 microns (320 microns)
- Measurement units: microns / μ inch selectable
- Max. traversing length: 17.5 mm

 

Manufacturer: JENOPTIK Industrial Metrology Germany GmbH
Test Instruments manufacturer
Order no.: HOMMEL ETAMIC W10

Profilometer Hommel Etamic W10 is a portable instrument for measuring roughness. The profilometer measures all common roughness variables according to international standards such as DIN EN ISO or ISO MOTIF.


- Measuring range: -210 ... 110 microns (320 microns)
- Measurement units: microns / μ inch selectable
- Max. traversing length: 17.5 mm

 

Manufacturer: JENOPTIK Industrial Metrology Germany GmbH
Test Instruments manufacturer