Self-adhesive surface sensor with fiberglass insulation for permanent fixation (with adhesive patch) at a specific measuring point

- Tmax.: 250 °C / 482 °F
- Accuracy: ± 1.5 °C
- Area: 50 x 25 x 2 mm
- Thermocouple: Type K

- digital interface - relay interface - easy installation through module slot in temperature gauge PCE-IR10

Mounting bracket adjustable in 2 axes for the measuring head of the temperature gauge PCE-IR10; enables the exact alignment.

Conductivity solution potassium chloride 84 µS / cm

Conductivity solution 250ml
84 μS/cm @ 25 °C  
Potassium chloride 0.001 mol/l
DIN EN 27888

incl. certificate 

The Digital Thermometer PCE-777N measures non-destructively and from a distance, the temperature of surfaces via infrared beam. This small Digital Thermometer is characterized by simple operation and the red sighting tool.

- Temperature range: -30 ... 260°C / -22 ... 500°F
- Measuring spot (measuring distance to measuring spot size): 8: 1
- Resolution: 0.1°C / 0.18°F

 

The HVAC Meter PCE-777N measures non-destructively and from a distance, the temperature of surfaces via infrared beam. This small HVAC Meter is characterized by simple operation and the red sighting tool.

- Temperature range: -30 ... 260°C / -22 ... 500°F
- Measuring spot (measuring distance to measuring spot size): 8: 1
- Resolution: 0.1°C / 0.18°F

 

The infrared thermometer measures the temperature of surfaces non-destructively and from a greater distance using an infrared beam. This lightweight infrared thermometer is characterized by the simplest operation and the red sighting aid.

- Temperature measuring range: -30 ... +260 °C / -22 ... 500 °F
- Measuring spot (measuring distance to measuring spot size): 8:1
- Resolution: 0.1 °C
- Measured value display either in °C or °F
- Fixed emissivity
- Measuring spot ratio 8:1

The Pyrometer PCE-777N measures non-destructively and from a distance, the temperature of surfaces via infrared beam. This small Pyrometer is characterized by simple operation and the red sighting tool.

- Temperature range: -30 ... 260°C / -22 ... 500°F
- Measuring spot (measuring distance to measuring spot size): 8: 1
- Resolution: 0.1°C / 0.18°F

 

Replacement cutter (ballerina) for PCE-TAT 10

The Temperature Meter PCE-777N measures non-destructively and from a distance, the temperature of surfaces via infrared beam. This small temperature meter is characterized by simple operation and the red sighting tool.

- Temperature range: -30 ... 260°C / -22 ... 500°F
- Measuring spot (measuring distance to measuring spot size): 8: 1
- Resolution: 0.1°C / 0.18°F

 

The Thermometer PCE-777N measures non-destructively and from a distance, the temperature of surfaces via infrared beam. This small temperature meter is characterized by simple operation and the red sighting tool.

- Temperature range: -30 ... 260°C / -22 ... 500°F
- Measuring spot (measuring distance to measuring spot size): 8: 1
- Resolution: 0.1°C / 0.18°F

 

Screw-on temperature sensor. The sensor is connected to a measuring instrument via a miniature plug.

- Tmax.: 200 °C / 392 °F
- Accuracy: ± 1.5 °C
- Length: 1 m
- Washer interior: 8 mm
- Thermocouple: Type K

Temperature contact sensor with Velcro tape

- Measuring range Tmax.: 400 °C / 752 °F
- Accuracy: ± 0.5 °C
- Ø 2 mm
- Length: 3 m / 9.8 ft
- Thermocouple: Type T

The PCE-AT 5 automotive tester / handheld ignition-tachometer is a portable device used to measure revolutions per minute (rpm) in one-cylinder two-stroke and eight-cylinder four-stroke combustion engines with electric ignition starters. The PCE-AT 5 handheld automotive ignition-tachometer features an easy-to-read, backlit digital LCD display and flashlight functionality for low-light applications.

- Measurement range: 100 ... 20000 rpm
- Resolution: 1 rpm
- Accuracy: ± 10 rpm
- Measurement interval: 0.5 seconds

 

The PCE-AT 5 car measuring device - handheld ignition-tachometer is a portable device used to measure revolutions per minute (rpm) in one-cylinder two-stroke and eight-cylinder four-stroke combustion engines with electric ignition starters. The PCE-AT 5 handheld automotive ignition-tachometer features an easy-to-read, backlit digital LCD display and flashlight functionality for low-light applications.

- Measurement range: 100 ... 20000 rpm
- Resolution: 1 rpm
- Accuracy: ± 10 rpm
- Measurement interval: 0.5 seconds

 

The PCE-AT 5 condition monitoring rotation meter is a portable device used to measure revolutions per minute (rpm) in one-cylinder two-stroke and eight-cylinder four-stroke combustion engines with electric ignition starters. The PCE-AT 5 handheld automotive ignition-tachometer features an easy-to-read, backlit digital LCD display and flashlight functionality for low-light applications.

- Measurement range: 100 ... 20000 rpm
- Resolution: 1 rpm
- Accuracy: ± 10 rpm
- Measurement interval: 0.5 seconds

 

The PCE-AT 5 Tachometer is a portable device used to measure revolutions per minute (rpm) in one-cylinder two-stroke and eight-cylinder four-stroke combustion engines with electric ignition starters. The PCE-AT 5 handheld automotive tachometer features an easy-to-read, backlit digital LCD display and flashlight functionality for low-light applications.

- Measurement range: 100 ... 20000 rpm
- Resolution: 1 rpm
- Accuracy: ± 10 rpm
- Measurement interval: 0.5 second

 

- Measuring range: 2.5 ... 99,999 rpm (RPM)
- Measurement accuracy: ± 0.02% + 1 digit
- Resolution: 2.5 ... 999 rpm: 0.1 rpm
- MIN / MAX / AVG mode
- Data hold function