Order no.: GS-3
Online version - the instrument ican be used to send reatime radiation measurement data to a PC or Laptop. It is a Geiger counter with acoustic signal, internal memory and software. The online version is mainly used in the radiation testing of imported goods (steel, wood) from critical areas, as well as to measure food which has been previously irradiated. Very often the instrument is a perfect measurement tool (because of the realtime data transfer) for industrial or institutional research and development.
- Measurement ranges: 0.01 µSv / h - 1000 µSv / h
- Radiation detector: Geiger-Muller counting tub
- Internal memory: 2 KB
- Radiation types: Alpha 4 MeV, Beta 0.2 MeV, Gamma 0.02 MeV
- Online, to transfer data to a PC, with pulse interval of 10, 30 or 60 sg
- With additional alarm and acoustic pulse indicator
Manufacturer: Gamma-Scout
Order no.: PCE-GPA 50
The PCE-GPA 50 HVAC meter is used to measure the current of 1- or 3-phase loads. This HVAC meter PCE-GPA 50 is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the HVAC meter.
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
Manufacturer: PCE Instruments
Order no.: PCE-GPA 50
The PCE-GPA 50 1-phase power meter is used to measure the current of 1- or 3-phase loads. This 1-phase power meter PCE-GPA 50 is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the 1-phase power meter.
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
Manufacturer: PCE Instruments
Order no.: PCE-GPA 50
The PCE-GPA 50 3-phase power meter is used to measure the current of 1- or 3-phase loads. This 3-phase power meter PCE-GPA 50 is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the 3-phase power meter.
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
Manufacturer: PCE Instruments
Order no.: PCE-GPA 50
The PCE-GPA 50 power analyzer is used to measure the current of 1- or 3-phase loads. This power analyzer PCE-GPA 50 is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the power analyzer.
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
Manufacturer: PCE Instruments
Order no.: PCE-GPA 50
The PCE-GPA 50 power meter is used to measure the current of 1- or 3-phase loads. This power meter PCE-GPA 50 is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the power meter.
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
Manufacturer: PCE Instruments
Order no.: GS-3
Radiation detector with acoustic signal, internal memory and software.
- Measurement ranges: 0.01 µSv/h - 1000 µSv/h
- Radiation detector: Geiger-Müller counting tub
- Internal memory: 2 KB
- Radiation types: Alpha 4 MeV, Beta 0.2 MeV, Gamma 0.02 MeV
- Online, to transfer data to a PC , with pulse interval of 10, 30 or 60 sg
- With additional alarm and acoustic pulse indicator
Manufacturer: Gamma-Scout
Order no.: GS-3
Radioactivity meter with acoustic signal, internal memory and software.
- Measurement ranges: 0.01 µSv / h - 1000 µSv / h
- Radiation detector: Geiger-Muller counting tub
- Internal memory: 2 KB
- Radiation types: Alpha 4 MeV, Beta 0.2 MeV, Gamma 0.02 MeV.
- Online, to transfer data to a PC , with pulse interval of 10, 30 or 60 sg
- With additional alarm and acoustic pulse indicator
Manufacturer: Gamma-Scout
Order no.: PCE-GPA 50
The PCE-GPA 50 voltmeter is used to measure the current of 1- or 3-phase loads. This voltmeterPCE-GPA 50 is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the voltmeter.
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
Manufacturer: PCE Instruments
Order no.: PCE-GM 60Plus-ICA
The PCE-GM 60Plus gloss meter is a portable handheld 60 degree gloss meter. This coating and paint gloss meter measures the gloss units (GU) on a material's surface. The rechargeable gloss meter or gloss tester uses reflected light for gloss measurement per ISO 2813, GB/T 9754, ASTM D523 and ASTM D2457 standards.
- Measuring geometry: 60° degree angle
- Measuring range: 0 ... 200 GU
- Measuring accuracy ±1.5 GU
- 3.5" TFT touchscreen display
- Light source: D65
- Wave length: 400-700 nm
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Order no.: PCE-GM 60Plus-ICA
The PCE-GM 60Plus NDT tester or gloss meter is a portable handheld 60 degree gloss meter. This coating and paint gloss meter measures the gloss units (GU) on a material's surface. The rechargeable gloss meter or gloss tester uses reflected light for gloss measurement per ISO 2813, GB/T 9754, ASTM D523 and ASTM D2457 standards.
- Measuring geometry: 60° degree angle
- Measuring range: 0 ... 200 GU
- Measuring accuracy ±1.5 GU
- 3.5" TFT touchscreen display
- Light source: D65
- Wave length: 400-700 nm
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Order no.: PCE-GM 60Plus-ICA
PCE-GM 60Plus is a portable handheld 60-degree reflective surface-testing gloss meter or gloss tester used to measure the gloss units (GU) on a material's surface. This rechargeable surface-testing gloss meter uses reflected light for gloss measurement per ISO 2813, GB/T 9754, ASTM D523 and ASTM D2457 standards.
- Measuring geometry: 60° degree angle
- Measuring range: 0 ... 200 GU
- Measuring accuracy ±1.5 GU
- 3.5" TFT touchscreen display
- Light source: D65
- Wave length: 400-700 nm
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Order no.: PCE-FGD-TOX
The PCE-FGD series Toxic Gas Detectors are used to protect against poisoning by toxic gases. The oxygen content of the air can also be monitored for a wide variety of applications. The robust ABS housing of the Toxic Gas Detectors with IP65 degree of protection allows operation even in the harshest environments.
- Sensors for many toxic gases and oxygen available
- robust ABS housing with IP65 degree of protection
- standard signal output 4… 20 mA / 2… 10 V
- durable sensors selectable
- easy installation
Manufacturer: PCE Instruments
Order no.: PCE-322ALEQ-ICA
The decibel meter PCE-322A is particularly suitable for measuring noise in the field of industrial, health, safety and environmental monitoring.
The PCE-322A decibel meter has a logger function, which allows storage of up to 32700 readings.
- Automatic range: 30 ... 130 dB
- Manual range: 30 ... 80 / 50 ... 100 / 80 ... 130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Memory capacity: 32700 values
- incl. software for LEQ calculation
- incl. ISO calibration certificate
Important! The LEQ value is only calculated by the software after the data transfer from the device to the PC or laptop.
Manufacturer: PCE Instruments
Order no.: PCE-322ALEQ-ICA
The environmental meter PCE-322A is particularly suitable for measuring noise in the field of industrial, health, safety and environmental monitoring.
The PCE-322A environmental meter has a logger function, which allows storage of up to 32700 readings.
- Automatic range: 30 ... 130 dB
- Manual range: 30 ... 80 / 50 ... 100 / 80 ... 130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Memory capacity: 32700 values
- incl. software for LEQ calculation
- incl. ISO calibration certificate
Important! The LEQ value is only calculated by the software after the data transfer from the device to the PC or laptop.
Manufacturer: PCE Instruments
Order no.: PCE-322ALEQ-ICA
The noise datalogger PCE-322A is particularly suitable for measuring noise in the field of industrial, health, safety and environmental monitoring.
The PCE-322A noise datalogger has a logger function, which allows storage of up to 32700 readings.
- Automatic range: 30 ... 130 dB
- Manual range: 30 ... 80 / 50 ... 100 / 80 ... 130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Memory capacity: 32700 values
- incl. software for LEQ calculation
- incl. ISO calibration certificate
Important! The LEQ value is only calculated by the software after the data transfer from the device to the PC or laptop.
Manufacturer: PCE Instruments
Order no.: PCE-322ALEQ-ICA
The noise dose meter PCE-322A is particularly suitable for measuring noise in the field of industrial, health, safety and environmental monitoring.
The PCE-322A noise dose meter has a logger function, which allows storage of up to 32700 readings.
- Automatic range: 30 ... 130 dB
- Manual range: 30 ... 80 / 50 ... 100 / 80 ... 130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Memory capacity: 32700 values
- incl. software for LEQ calculation
- incl. ISO calibration certificate
Important! The LEQ value is only calculated by the software after the data transfer from the device to the PC or laptop.
Manufacturer: PCE Instruments
Order no.: PCE-322ALEQ-ICA
The noise meter / sound meter PCE-322A is particularly suitable for measuring noise in the field of industrial, health, safety and environmental monitoring.
The PCE-322A noise meter / sound meter has a logger function, which allows storage of up to 32700 readings.
- Automatic range: 30 ... 130 dB
- Manual range: 30 ... 80 / 50 ... 100 / 80 ... 130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Memory capacity: 32700 values
- incl. software for LEQ calculation
- incl. ISO calibration certificate
Important! The LEQ value is only calculated by the software after the data transfer from the device to the PC or laptop.
Manufacturer: PCE Instruments
Order no.: PCE-322ALEQ-ICA
The sound level meter / noise level meter PCE-322ALEQ is ideal for long term monitoring of noise in various environments.
The sound level meter / noise level meter PCE-322ALEQ can be connected to the PC with a USB cable.
- Automatic range: 30 ... 130 dB
- Manual range: 30 ... 80 / 50 ... 100 / 80 ... 130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Memory capacity: 32700 values
- incl. software for LEQ calculation
- incl. ISO calibration certificate
Important! The LEQ value is only calculated by the software after the data transfer from the device to the PC or laptop.
Manufacturer: PCE Instruments
Order no.: PCE-322ALEQ-ICA
The SPL meter PCE-322A is particularly suitable for measuring noise in the field of industrial, health, safety and environmental monitoring.
The PCE-322A SPL meter has a logger function, which allows storage of up to 32700 readings.
- Automatic range: 30 ... 130 dB
- Manual range: 30 ... 80 / 50 ... 100 / 80 ... 130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Memory capacity: 32700 values
- incl. software for LEQ calculation
- incl. ISO calibration certificate
Important! The LEQ value is only calculated by the software after the data transfer from the device to the PC or laptop.
Manufacturer: PCE Instruments