The PCE-FGD series Carbon Dioxide Meters are used to protect against poisoning by toxic gases. The oxygen content of the air can also be monitored for a wide variety of applications. The robust ABS housing of the toxic gas detectors with IP65 degree of protection allows operation even in the harshest environments.

- sensors for many toxic gases and oxygen available
- robust ABS housing with IP65 degree of protection
- standard signal output 4… 20 mA / 2… 10 V
- durable sensors selectable
- easy installation

The PCE-FGD series CO2 Analysers are used to protect against poisoning by toxic gases. The oxygen content of the air can also be monitored for a wide variety of applications. The robust ABS housing of the toxic gas detectors with IP65 degree of protection allows operation even in the harshest environments.

- sensors for many toxic gases and oxygen available
- robust ABS housing with IP65 degree of protection
- standard signal output 4… 20 mA / 2… 10 V
- durable sensors selectable
- easy installation

The PCE-FGD series Formaldehyde Meters are used to protect against poisoning by toxic gases. The oxygen content of the air can also be monitored for a wide variety of applications. The robust ABS housing of the toxic gas detectors with IP65 degree of protection allows operation even in the harshest environments.

- sensors for many toxic gases and oxygen available
- robust ABS housing with IP65 degree of protection
- standard signal output 4… 20 mA / 2… 10 V
- durable sensors selectable
- easy installation

The PCE-FGD series Ozone Meters are used to protect against poisoning by toxic gases. The oxygen content of the air can also be monitored for a wide variety of applications. The robust ABS housing of the toxic gas detectors with IP65 degree of protection allows operation even in the harshest environments.

- sensors for many toxic gases and oxygen available
- robust ABS housing with IP65 degree of protection
- standard signal output 4… 20 mA / 2… 10 V
- durable sensors selectable
- easy installation

The PCE-VE 200SV1 automotive tester is a nondestructive inspection camera. Thus, the PCE-VE 200SV1 automotive tester is the ideal instrument for diagnosing hard-to-reach areas. Thus, the areas of mechanical engineering, sanitary and heating construction, and the entire construction and construction industry are among the main applications of the automotive tester PCE-VE 200SV1.

- Camera head diameter 9 mm / 0.4 in
- Cable length: 1 m / 3.3 ft 
- Interface: Micro USB 2.0
- Memory: Micro SD card
- Front and side view camera

The car measuring device PCE-VE 200SV1 videoscope is a nondestructive inspection camera. Thus, the car measuring device is the ideal instrument for diagnosing hard-to-reach areas. Thus, the areas of mechanical engineering, sanitary and heating construction, and the entire construction industry are among the main applications of the car measuring device.

 

- Camera head diameter: 9 mm / 0.4 in
- Cable length: 1 m / 3.3 ft 
- Interface: Micro USB 2.0
- Memory: Micro SD card
- Front and side view camera

PCE-CS 5000N is a digital battery-powered Crane Scale that displays measurement values in kilograms (kg) or pounds (lbs). The Crane Scale comes factory calibrated and includes a hook, shackle and remote control. For an additional fee, the scale can be calibrated according to ISO standards.

- Maximum weighing capacity: 5000 kg / 11023 lbs ≈ 5 Tons
- Resolution: 1 kg
- Tare range: 100% full scale

PCE-917 is a portable handheld digital differential pressure gauge, meter or manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-917 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.

- Pressure measuring range: ± 700 kPa / ± 101.5 psi / ± 7 bar
- Resolution: 500 Pa / 0.0725 psi / 0.005 bar
- 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
- Optional PC software with RS-232 cable sold separately as a data transfer accessory
- Incl. ISO calibration certificate

PCE-917 is a portable handheld digital HVAC Meter, gauge or manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-917 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.

- Pressure measuring range: ± 700 kPa / ± 101.5 psi / ± 7 bar
- Resolution: 500 Pa / 0.0725 psi / 0.005 bar
- 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
- Optional PC software with RS-232 cable sold separately as a data transfer accessory
- Incl. ISO calibration certificate

PCE-917 is a portable handheld digital differential pressure manometer, gauge, or meter used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-917 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.

- Pressure measuring range: ± 700 kPa / ± 101.5 psi / ± 7 bar
- Resolution: 500 Pa / 0.0725 psi / 0.005 bar
- 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
- Optional PC software with RS-232 cable sold separately as a data transfer accessory
- Incl. ISO calibration certificate

PCE-917 is a portable handheld digital differential pressure meter, gauge or manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-917 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.

- Pressure measuring range: ± 700 kPa / ± 101.5 psi / ± 7 bar
- Resolution: 500 Pa / 0.0725 psi / 0.005 bar
- 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
- Optional PC software with RS-232 cable sold separately as a data transfer accessory
- Incl. ISO calibration certificate

PCE-917 is a portable handheld digital differential pressure vacuum gauge, meter or manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-917 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.

- Pressure measuring range: ± 700 kPa / ± 101.5 psi / ± 7 bar
- Resolution: 500 Pa / 0.0725 psi / 0.005 bar
- 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
- Optional PC software with RS-232 cable sold separately as a data transfer accessory
- Incl. ISO calibration certificate

Parameter:
- AC voltage, DC voltage
- AC / DC
- Resistance, conductivity
- Capacitance measurement, temperature
- Frequency measurement , duty cycle ratio
- Pulse width, continuity test
- Diode test

Parameter:
- AC voltage, DC voltage
- AC / DC
- Resistance, conductivity
- Capacitance measurement, temperature
- Frequency measurement , duty cycle ratio
- Pulse width, continuity test
- Diode test

The Environmental Meter measures α-, β-, γ- and X-rays and offers a high measurement accuracy and convenient design. Using the integrated Bluetooth interface in the Environmental Meter, the measured values can be sent in real time to a PC and analyzed with the included software.

- Α-, β-, γ- and X-rays
- Bluetooth interface
- Internal memory
- Software Included

 

The Environmental Tester measures α-, β-, γ- and X-rays and offers a high measurement accuracy and convenient design. Using the integrated Bluetooth interface in the Environmental Tester, the measured values can be sent in real time to a PC and analyzed with the included software.

- Α-, β-, γ- and X-rays
- Bluetooth interface
- Internal memory
- Software Included

 

PCE-CS 5000N is a digital battery-powered force gage that displays measurement values in kilograms (kg) or pounds (lbs). The force gage comes factory calibrated and includes a hook, shackle and remote control. For an additional fee, the force gage can be calibrated according to ISO standards.

- Maximum weighing capacity: 5000 kg / 11023 lbs ≈ 5 Tons
- Resolution: 1 kg
- Tare range: 100% full scale

 

PCE-CS 5000N is a digital battery-powered Force Gauge that displays measurement values in kilograms (kg) or pounds (lbs). The Force Gauge comes factory calibrated and includes a hook, shackle and remote control. For an additional fee, the scale can be calibrated according to ISO standards.

- Maximum weighing capacity: 5000 kg / 11023 lbs ≈ 5 Tons
- Resolution: 1 kg
- Tare range: 100% full scale