Industrial Measurement Products and Solutions
Order no.: PCE-DSX 20-ICA
The car measuring device PCE-DSX 20-ICA is mostly used for speed or vibration measurement or for motion observations. This car measuring device has a small design and has a low weight. Thus, the car measuring device can be conveniently used even in measurements in hard to reach places.

Function
- Speed: 50 ... 35000 RPM / FPM
- Flash frequency
- phase shift
- Lamp type: Xenon flash
- Flash response time: 10 ... 30 μs
- With trigger input
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DSX 20-ICA
The condition monitoring stroboscope PCE-DSX 20-ICA is mostly used for speed or vibration measurement or for motion observations. This condition monitoring stroboscope has a small design and has a low weight. Thus, the tachometer can be conveniently used even in measurements in hard to reach places.

Function
- Speed: 50 ... 35000 RPM / FPM
- Flash frequency
- phase shift
- Lamp type: Xenon flash
- Flash response time: 10 ... 30 μs
- With trigger input
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-IR10

Infrared Thermometer with LCD for continuous measurement of surface temperature of all solid materials, designed for fixed installation.


- Temperature range: -40 ... 600 °C / -40 ... 1112 °F
- Accuracy: ± 1% or ± 1°C / 1.8°F
- Optical resolution: 15:1
- Storage conditions: -40 ... 85°C / -40 ... 185°F
- Spectral range: 8.0 ... 14 µm
- Emissivity: 0.100 - 1.000 adjustable in digital mode, by units of 0.001
- Outputs: analogue, USB, RS-232, RS-485, relay

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DSX 20-ICA
The handheld tachometer PCE-DSX 20-ICA is mostly used for speed or vibration measurement or for motion observations. This handheld tachometer  has a small design and has a low weight. Thus, the handheld tachometer can be conveniently used even in measurements in hard to reach places.

Function
- Speed: 50 ... 35000 RPM / FPM
- Flash frequency
- phase shift
- Lamp type: Xenon flash
- Flash response time: 10 ... 30 μs
- With trigger input
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-IR10

The PCE-IR10 HVAC Meter is made up of a small sensor head and a separate electrical component. The HVAC Meter sensor is so small that it can fit in almost any space. part from this, the device offers similar specifications as other devices.


- Temperature range: -40 ... 600°C / -40 ... 1112°F
- Accuracy: ± 1% or ± 1°C / 1.8°F
- Optical resolution: 15:1
- Storage conditions: -40 ... 85°C / -40 ... 185°F
- Spectral range: 8.0 ... 14 µm
- Emissivity: 0.100 - 1.000 adjustable in digital mode, by units of 0.001
- Outputs: analogue, USB, RS-232, RS-485, relay

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-ULM 10
The level indicator is the ideal measuring device to determine the fill level of a silo. Thanks to the 4 … 20-mA output signal, the level indicator can also be connected to the operational process control.

- Measuring range: 0 ... 10 m / 0 ... 32.8 ft
- Accuracy: 0.5%
- Resolution: 0.001 m
- With display for setting and reading
- Stable M60 connection thread
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-IR10

Solid pyrometer with LCD for continuous measurement of surface temperature of all solid materials, designed for fixed installation.


- Temperature range: -40 ... 600°C / -40 ... 1112°F
- Accuracy: ± 1% or ± 1°C / 1.8°F
- Optical resolution: 15:1
- Storage conditions: -40 ... 85°C / -40 ... 185°F
- Spectral range: 8.0 ... 14 µm
- Emissivity: 0.100 - 1.000 adjustable in digital mode, by units of 0.001
- Outputs: analogue, USB, RS-232, RS-485, relay

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DSX 20-ICA
The stroboscope PCE-DSX 20-ICA is mostly used for speed or vibration measurement or for motion observations. This stroboscope has a small design and has a low weight. Thus, the stroboscope can be conveniently used even in measurements in hard to reach places.

Function
- Speed: 50 ... 35000 RPM / FPM
- Flash frequency
- phase shift
- Lamp type: Xenon flash
- Flash response time: 10 ... 30 μs
- With trigger input
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-IR10

The PCE-IR10 temperature meter is made up of a small sensor head and a separate electrical component. The temperature meter sensor is so small that it can fit in almost any space. part from this, the device offers similar specifications as other devices. Each temperature meter comes manufacturer calibrated and can be certified according to the ISO standards as an option. In general our laboratory adjusts the temperature meter to two temperature points.


- Temperature range: -40 ... 600°C / -40 ... 1112°F
- Accuracy: ± 1% or ± 1°C / 1.8°F
- Optical resolution: 15:1
- Storage conditions: -40 ... 85°C / -40 ... 185°F
- Spectral range: 8.0 ... 14 µm
- Emissivity: 0.100 - 1.000 adjustable in digital mode, by units of 0.001
- Outputs: analogue, USB, RS-232, RS-485, relay

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DSX 20-ICA
The tachometer PCE-DSX 20-ICA is mostly used for speed or vibration measurement or for motion observations. This tachometer has a small design and has a low weight. Thus, the tachometer can be conveniently used even in measurements in hard to reach places.

Function
- Speed: 50 ... 35000 RPM / FPM
- Flash frequency
- phase shift
- Lamp type: Xenon flash
- Flash response time: 10 ... 30 μs
- With trigger input
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-IR10

The PCE-IR10 temperature meter is made up of a small sensor head and a separate electrical component. The temperature meter sensor is so small that it can fit in almost any space. part from this, the device offers similar specifications as other devices. Each temperature meter comes manufacturer calibrated and can be certified according to the ISO standards as an option. In general our laboratory adjusts the temperature meter to two temperature points.


- Temperature range: -40 ... 600°C / -40 ... 1112°F
- Accuracy: ± 1% or ± 1°C / 1.8°F
- Optical resolution: 15:1
- Storage conditions: -40 ... 85°C / -40 ... 185°F
- Spectral range: 8.0 ... 14 µm
- Emissivity: 0.100 - 1.000 adjustable in digital mode, by units of 0.001
- Outputs: analogue, USB, RS-232, RS-485, relay

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-IR10

Solid non-contact thermometer with LCD for continuous measurement of surface temperature of all solid materials, designed for fixed installation.


- Temperature range: -40 ... 600°C / -40 ... 1112°F
- Accuracy: ± 1% or ± 1°C / 1.8°F
- Optical resolution: 15:1
- Storage conditions: -40 ... 85°C / -40 ... 185°F
- Spectral range: 8.0 ... 14 µm
- Emissivity: 0.100 - 1.000 adjustable in digital mode, by units of 0.001
- Outputs: analogue, USB, RS-232, RS-485, relay

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-ULM 10
The ultrasonic level indicator is the ideal measuring device to determine the fill level of a silo. Thanks to the 4 … 20-mA output signal, the ultrasonic level indicator can also be connected to the operational process control.

- Measuring range: 0 ... 10 m / 0 ... 32.8 ft
- Accuracy: 0.5%
- Resolution: 0.001 m
- With display for setting and reading
- Stable M60 connection thread
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 200-S

PCE-VE 200-S is an industrial inspection camera, endoscope or borescope for the non-destructive evaluation (NDE) of engines, machines and more. This industrial borescope provides excellent image quality at an affordable price. An ideal tool for diagnosing issues in hard-to-reach places, the waterproof camera head features 6 LED lights with adjustable intensity for optimal illumination. In addition, digital image magnification or zoom of up to 4 times is available.


- 3.7 mm / 0.14 in diameter
- 1 m / 3.28 ft cable length
- 180° image rotation


Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DDD 10

The PCE-DDD 10 Shore D durometer is a portable handheld device used to check Shore D hardness in hard rubber and thermoplastic. This digital durometer has a reading accuracy of 0.1 hardness units. The durometer comes manufacturer calibrated and can be optionally certified to ISO standards for an additional fee (see accessories for details).


- Portable handheld digital device
- For Shore D hardness testing
- Single and serial measurements
- Data transfer to PC

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-FM 200-ICA
The dynamometer PCE-FM 200 is a handheld device that measures up to 200 N. The dynamometer PCE-FM 200 can determine the units N, kg and lb. The PCE-FM 200 dynamometer is supplied with various adapters that have different shapes. The dynamometer PCE-FM 200 can measure both tensile and compressive forces. This dynamometer comes with an ISO calibration certificate (PCE-FM 200-ICA).


- Measuring range: 0 ... 200 N / 0 ... 20  kg / 0 ... 45 lbs
- Measurement accuracy: ±0.5%
- Units: N, KG, lb
- Integrated load cell with M6 connection
- Evaluation via USB interface
- Downloadable evaluation software
- Incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-IT 120
The electrical tester PCE-IT 120 detects insulation resistance up to max. 8 GΩ (with auxiliary voltages of 250, 500 and 1000V). In addition, this PCE-IT 120 electrical tester offers a measuring function for DC and AC voltages up to max. 950V DC and 700V AC as well as resistors up to max. 2 kΩ.

- DC test voltage: 250/500 / 1000V
- OLED display
- Automatic polarity display
- Automatic range selection
- PI and DAR test
- Degree of protection / standardization: IEC 1010-1, 700V CAT III
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-FM 200-ICA
The force gauge PCE-FM 200 is a handheld device that measures up to 200 N. The force gauge PCE-FM 200 can determine the units N, kg and lb. The PCE-FM 200 force gauge is supplied with various adapters that have different shapes. The force gauge PCE-FM 200 can measure both tensile and compressive forces. This force gauge comes with an ISO calibration certificate (PCE-FM 200-ICA).


- Measuring range: 0 ... 200 N / 0 ... 20  kg / 0 ... 45 lbs
- Measurement accuracy: ±0.5%
- Units: N, KG, lb
- Integrated load cell with M6 connection
- Evaluation via USB interface
- Downloadable evaluation software
- Incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DDD 10

The PCE-DDD 10 shore hardness tester and durometer is an ergonomic device to check Shore D hardness in materials such as hard rubber and thermoplastic. It has been designed with a very high quality.  The durometer (as all test instruments) comes manufacturer calibrated and can additionally be lab certified to ISO standards.


- Handheld device
- For Shore D measurements
- Single and Serial Measurements
- Data transfer to PC

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 200-S

The PCE-VE 200-S is an industrial inspection borescope camera or engine borescope for the non-destructive evaluation (NDE) of engines, machines and constructions. This industrial borescope provides excellent image quality at an affordable price. An ideal tool for diagnosing issues in hard-to-reach places, the waterproof camera head of this borescope camera features 6 LED lights with adjustable intensity for optimal illumination. In addition, digital image magnification or zoom of up to 4 times is available.


- 3.7 mm / 0.14 in diameter
- 1 m / 3.28 ft cable length
- 180° image rotation


Manufacturer: PCE Instruments
Test Instruments manufacturer