Industrial Measurement Products and Solutions
Order no.: PCE-NDL 10

PCE-NDL 10 is a high-quality class 2 condition monitoring device with data logging capabilities. This noise dosimeter records sound pressure level (SPL) measurements as well as dosimetry (dose) measurements in decibels (dB) and saves the measurement data to the internal memory of 16,000 records, which can then be transferred to an SD card (SD card included).


- Class 2
- Measuring range:   30 ... 130 dB (SPL) / 70 ... 130 dB (dose)
- Accuracy: ±1.4 dB (1000 Hz)
- Data logging: Manual or adjustable automatic
- Sampling rate: Approx. 1 second
- Frequency weighting: A, C
- Time weighting: Fast, slow
- RS-232 and USB interface

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-NDL 10

PCE-NDL 10 is a high-quality class 2 sound level meter with data logging capabilities. This noise dosimeter records sound pressure level (SPL) measurements as well as dosimetry (dose) measurements in decibels (dB) and saves the measurement data to the internal memory of 16,000 records, which can then be transferred to an SD card (SD card included).

- Class 2
- Measuring range:   30 ... 130 dB (SPL) / 70 ... 130 dB (dose)
- Accuracy: ±1.4 dB (1000 Hz)
- Data logging: Manual or adjustable automatic
- Sampling rate: Approx. 1 second
- Frequency weighting: A, C
- Time weighting: Fast, slow
- RS-232 and USB interface

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-NDL 10

PCE-NDL 10 is a high-quality decibel meter with data logging capabilities. This noise dosimeter records sound pressure level (SPL) measurements as well as dosimetry (dose) measurements in decibels (dB) and saves the measurement data to the internal memory of 16,000 records, which can then be transferred to an SD card (SD card included).


- Measuring range:
  30 ... 130 dB (SPL) / 70 ... 130 dB (dose)
- Accuracy: ± 3.5 dB (31.5 Hz) ... ± 5.6 dB (8000 Hz)
- Data logging: Manual or adjustable automatic
- Sampling rate: Approx. 1 second
- Frequency weighting: A and C

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-NDL 10

PCE-NDL 10 is a high-quality noise dose meter or sound level meter with data logging capabilities. This noise dosimeter records sound pressure level (SPL) measurements as well as dosimetry (dose) measurements in decibels (dB) and saves the measurement data to the internal memory of 16,000 records, which can then be transferred to an SD card (SD card included).


- Measuring range: 30 ... 130 dB (SPL) / 70 ... 130 dB (dose)
- Accuracy: ± 3.5 dB (31.5 Hz) ... ± 5.6 dB (8000 Hz)
- Data logging: Manual or adjustable automatic
- Sampling rate: Approx. 1 second
- Frequency weighting: A and C

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-NDL 10

PCE-NDL 10 is a high-quality class 2 sound level meter with data logging capabilities. This noise dosimeter records sound pressure level (SPL) measurements as well as dosimetry (dose) measurements in decibels (dB) and saves the measurement data to the internal memory of 16,000 records, which can then be transferred to an SD card (SD card included). These sound logging test instruments are calibrated by the manufacturer. An ISO calibration certificate is available as an option.


- Measuring range:
  30 ... 130 dB (SPL) / 70 ... 130 dB (dose)
- Accuracy: ± 3.5 dB (31.5 Hz) ... ± 5.6 dB (8000 Hz)
- Data logging: Manual or adjustable automatic
- Sampling rate: Approx. 1 second
- Frequency weighting: A and C

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-FM 200-ICA
The dynamometer PCE-FM 200 is a handheld device that measures up to 200 N. The dynamometer PCE-FM 200 can determine the units N, kg and lb. The PCE-FM 200 dynamometer is supplied with various adapters that have different shapes. The dynamometer PCE-FM 200 can measure both tensile and compressive forces. This dynamometer comes with an ISO calibration certificate (PCE-FM 200-ICA).


- Measuring range: 0 ... 200 N / 0 ... 20  kg / 0 ... 45 lbs
- Measurement accuracy: ±0.5%
- Units: N, KG, lb
- Integrated load cell with M6 connection
- Evaluation via USB interface
- Downloadable evaluation software
- Incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-IT 120
The electrical tester PCE-IT 120 detects insulation resistance up to max. 8 GΩ (with auxiliary voltages of 250, 500 and 1000V). In addition, this PCE-IT 120 electrical tester offers a measuring function for DC and AC voltages up to max. 950V DC and 700V AC as well as resistors up to max. 2 kΩ.

- DC test voltage: 250/500 / 1000V
- OLED display
- Automatic polarity display
- Automatic range selection
- PI and DAR test
- Degree of protection / standardization: IEC 1010-1, 700V CAT III
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-FM 200-ICA
The force gauge PCE-FM 200 is a handheld device that measures up to 200 N. The force gauge PCE-FM 200 can determine the units N, kg and lb. The PCE-FM 200 force gauge is supplied with various adapters that have different shapes. The force gauge PCE-FM 200 can measure both tensile and compressive forces. This force gauge comes with an ISO calibration certificate (PCE-FM 200-ICA).


- Measuring range: 0 ... 200 N / 0 ... 20  kg / 0 ... 45 lbs
- Measurement accuracy: ±0.5%
- Units: N, KG, lb
- Integrated load cell with M6 connection
- Evaluation via USB interface
- Downloadable evaluation software
- Incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-IT 120
The insulation tester PCE-IT 120 detects insulation resistance up to max. 8 GΩ (with auxiliary voltages of 250, 500 and 1000V). In addition, this PCE-IT 120 insulation tester offers a measuring function for DC and AC voltages up to max. 950V DC and 700V AC as well as resistors up to max. 2 kΩ.

- DC test voltage: 250/500 / 1000V
- OLED display
- Automatic polarity display
- Automatic range selection
- PI and DAR test
- Degree of protection / standardization: IEC 1010-1, 700V CAT III
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DMM 21

The manometer PCE-DMM 21 is suitable for flush sanitary installation. The manometer may represent on its rotatable display pressures up to 40 bar, absolute or relative. The filling of the manometer has a food safe FDA approval. The flush mounting of the manometer can be sterilized.


- To 40 bar / 580 psi
- Relative and absolute pressure measurement
- Max-min function with reset
- 2-line backlit display

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DMM 21

The pressure gauge PCE-DMM 21 is suitable for flush sanitary installation. The pressure gauge may represent on its rotatable display pressures up to 40 bar, absolute or relative. The filling of the pressure gauge has a food safe FDA approval. The flush mounting of the pressure gauge can be sterilized.


- To 40 bar / 580 psi
- Relative and absolute pressure measurement
- Max-min function with reset
- 2-line backlit display

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DMM 21

The pressure indicator PCE-DMM 21 is suitable for flush sanitary installation. The pressure indicator may represent on its rotatable display pressures up to 40 bar, absolute or relative. The filling of the pressure indicator has a food safe FDA approval. The flush mounting of the pressure indicator can be sterilized.


- To 40 bar / 580 psi
- Relative and absolute pressure measurement
- Max-min function with reset
- 2-line backlit display

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DMM 21

The pressure meter PCE-DMM 21 is suitable for flush sanitary installation. The pressure meter may represent on its rotatable display pressures up to 40 bar, absolute or relative. The filling of the pressure meter has a food safe FDA approval. The flush mounting of the pressure meter can be sterilized.


- To 40 bar / 580 psi
- Relative and absolute pressure measurement
- Max-min function with reset
- 2-line backlit display

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DMM 21

The pressure sensor PCE-DMM 21 is suitable for flush sanitary installation. The pressure sensor may represent on its rotatable display pressures up to 40 bar, absolute or relative. The filling of the pressure sensor has a food safe FDA approval. The flush mounting of the pressure sensor can be sterilized.


- To 40 bar / 580 psi
- Relative and absolute pressure measurement
- Max-min function with reset
- 2-line backlit display

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-TG 50

PCE-TG 50 is a compact ultrasonic material thickness meter or gauge used to measure the thickness of metal, glass, plastic and other homogeneous materials. This portable handheld material thickness gauge operates with an external ultrasonic contact transducer sensor probe and requires the use of coupling gel or paste.

 

- Measurement range: 1.2 ... 200 mm / 0.05 ... 7.87 in (steel)
- Accuracy: ± 0.5% v. Mw. ± 0.1 mm / ± 0.0039 in
- Resolution: 0.1 mm / 0.001 in
- Ultrasound velocity (adjustable): 800 ... 9950 m/s / 2624 ... 32644 ft/s
- External sensor
- RS-232 interface
- Incl. calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-TG 50

PCE-TG 50 is a compact ultrasonic thickness meter or gauge used to measure the thickness of metal, glass, plastic and other homogeneous materials. This portable handheld material thickness gauge operates with an external ultrasonic contact transducer sensor probe and requires the use of coupling gel or paste.

 

- Measurement range: 1.2 ... 200 mm / 0.05 ... 7.87 " (steel)
- Accuracy: ± 0.5% v. Mw. ± 0.1 mm / ± 0.0039 inch
- Resolution: 0.1 mm / 0.001 "
- Ultrasound velocity (adjustable): 800 ... 9950 m/s / 2624 ... 32644 ft/s
- External sensor
- RS-232 interface
- incl. calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-TG 50

PCE-TG 50 is a compact ultrasonic thickness tester or gauge used to measure the thickness of metal, glass, plastic and other homogeneous materials. This portable handheld material thickness gauge operates with an external ultrasonic contact transducer sensor probe and requires the use of coupling gel or paste.

 

- Measurement range: 1.2 ... 200 mm / 0.05 ... 7.87 in (steel)
- Accuracy: ± 0.5% v. Mw. ± 0.1 mm / ± 0.0039 in
- Resolution: 0.1 mm / 0.001 in
- Ultrasound velocity (adjustable): 800 ... 9950 m/s / 2624 ... 32644 ft/s
- External sensor
- RS-232 interface
- Incl. calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: CA-D36N

CA-D36N D Series Clamp on Tester
for oscilloscopes / for AC currents from 100 mA to 3000 A / 30 Hz - 50 kHz bandwidth / enclosure - Ø 64 mm / no power supply needed

The CA-D36N D Series Clamp on Tester for oscilloscopes, from Chauvin Arnoux, with its excellent characteristics is very suitable for the measurement of high currents. The high quality, low phase shift, and the wide frequency range of the D Series Clamp on Tester ensures accurate measurements, even with power measurements. The Clamp on Tester has a high-quality iron core with evenly distributed windings, allowing for accurate AC current measurement even at currents up to 3000 A. Due to the rectangular shape, the D Series is particularly suitable for busbars and cables with a large cross section. In total there are 10 different models of the D Series current transformers for oscilloscopes. They differ mainly in measuring range, CT ratio, and output. When measuring with the D Series the range that can be selected is between the maximum values 1500 A and 3000 A. The conversion ratio must be configured on either alternating current or voltage. And finally, the different models of the D Series differ in their output. There is a variant socket, cable with safety plug, and cable with BNC connector. Thus the D Series is suitable for both oscilloscopes and multimeters.

Manufacturer: Chauvin Arnoux GmbH
Test Instruments manufacturer
Order no.: CA-D36N

The CA-D36N D Series Current Clamp for oscilloscopes has a high-quality iron core with evenly distributed windings. This allows accurate AC current measurement, even at currents up to 3000 A. Due to the rectangular shape, the Current Clamp is particularly suitable for busbars and cables with a large cross section. The Current Clamp adapter comes manufacturer calibrated with ISO calibration as an option.
- Measuring range: 1 A to 3000 A
- Transformer Ratio: 1 A / 1 mA
- Connection: 4 mm / 0.2 in socket

Manufacturer: Chauvin Arnoux GmbH
Test Instruments manufacturer
Order no.: PCE-SD 60C

The counting scales PCE-SD 60C are low-cost robust verifiable system balances. The calibration of the scales is according to the trading class M III. The sturdy foundation is made of painted steel and features a plastic-coated steel platform.


- Weighing capacity: 60 kg
- Readability: 20g
- Minimum load: 400 g
- Platform size: 400 x 500 mm
- Certifiable: M III

 

Manufacturer: PCE Instruments
Test Instruments manufacturer